Steel Hydraulic Hose Adapters

This 3/4-inch high-pressure 5000 PSI four-bolt hydraulic steel flange kit offers leak-free connection. It meets CSA standards BSPP, has a straight NPTF thread, and is for both tube and pipe weld connections. The kit includes two flange clamp halves, four HHCS bolts, four lock washers, and an O-ring.

This 3/4-inch high-pressure 5000 PSI four-bolt hydraulic steel flange kit offers leak-free connection. It meets CSA standards BSPP, has a straight NPTF thread, and is for both tube and pipe weld connections. The kit includes two flange clamp halves, four HHCS bolts, four lock washers, and an O-ring.

This steel Male Run Tee provides a leak-tight seal for your high pressure gas or liquid applications. Hose fitting A has a 1/8"-27 thread size and a NPTF connection type. Hose fitting B has a 1/8"-27 thread size and a NPTF connection type. Hose fitting C has a 1/8"-27 thread size and a NPTF connection type. This fitting is rated up to 5,000 PSI and conforms to SAE standards.

This steel Male Run Tee provides a leak-tight seal for your high pressure gas or liquid applications. Hose fitting A has a 1/8"-27 thread size and a NPTF connection type. Hose fitting B has a 1/8"-27 thread size and a NPTF connection type. Hose fitting C has a 1/8"-27 thread size and a NPTF connection type. This fitting is rated up to 5,000 PSI and conforms to SAE standards.

Male run tee, connecting 1/4 inch 37 Degrees JIC flare at ends A and C and 1/8"-27 thread NPTF at end B with tube ends measuring 7/16"-20 thread UN/UNF-2A and tube fitting part 4RTX, is designed for use in all hydraulic fluids applications.

Male run tee, connecting 1/4 inch 37 Degrees JIC flare at ends A and C and 1/8"-27 thread NPTF at end B with tube ends measuring 7/16"-20 thread UN/UNF-2A and tube fitting part 4RTX, is designed for use in all hydraulic fluids applications.

Connect your pipe to other threaded fittings, valves, or equipment with this straight pipe nipple. It features a 2"-11 1/2 male NPTF thread on each end. This pipe fitting has an overall length of 2.83 inches and conforms to SAE standards.

Connect your pipe to other threaded fittings, valves, or equipment with this straight pipe nipple. It features a 2"-11 1/2 male NPTF thread on each end. This pipe fitting has an overall length of 2.83 inches and conforms to SAE standards.

Nut adapter designed to connect 3/4" SAE O-Ring Boss (1 1/16"-12 thread) male end and with a 3/4" 37 Degrees JIC (1 1/16"-12 thread) female flare swivel. Engineered for use in hydraulic fluid operations.

Nut adapter designed to connect 3/4" SAE O-Ring Boss (1 1/16"-12 thread) male end and with a 3/4" 37 Degrees JIC (1 1/16"-12 thread) female flare swivel. Engineered for use in hydraulic fluid operations.

Stainless steel expander/adapter, male end pipe thread fitting 1/4"-18 thread NPTF and female pipe thread measuring 1/2"-14 thread with a 1 1/8 inch hex. Engineered for hydraulic fluid operations.

Stainless steel expander/adapter, male end pipe thread fitting 1/4"-18 thread NPTF and female pipe thread measuring 1/2"-14 thread with a 1 1/8 inch hex. Engineered for hydraulic fluid operations.

This hose barb fitting meets the standards for SAE J1231, has an operating temperature of -40 Degrees to 160 Degrees and is made of brass. In addition, it has ¼" thread and it has a Hose barb connection type.

This hose barb fitting meets the standards for SAE J1231, has an operating temperature of -40 Degrees to 160 Degrees and is made of brass. In addition, it has ¼" thread and it has a Hose barb connection type.

This 24 Degrees flareless fitting meets the standards for SAE J514, has a length of 0.37 inches, a maximum operating pressure of 6,000 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating.

This 24 Degrees flareless fitting meets the standards for SAE J514, has a length of 0.37 inches, a maximum operating pressure of 6,000 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating.

Connect different-sized thread fittings together with this hydraulic adapter.

Connect different-sized thread fittings together with this hydraulic adapter.

This hose barb fitting meets the standards for SAE J1231, has an operating temperature of -40 Degrees to 160 Degrees and is made of brass. In addition, it has ¼" thread and it has a Hose barb connection type.

This hose barb fitting meets the standards for SAE J1231, has an operating temperature of -40 Degrees to 160 Degrees and is made of brass. In addition, it has ¼" thread and it has a Hose barb connection type.

This JLO series tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 2.64 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, over torque, vibration and is made of steel. In addition, it is a tee, with an imperial/metric system of measurement.

This JLO series tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a length of 2.64 inch, a maximum operating pressure of 6,000 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, over torque, vibration and is made of steel. In addition, it is a tee, with an imperial/metric system of measurement.

This elbow meets the standards for SAE 070302, and it is made of steel. In addition, it is an elbow, and has a 1½"-11½ x 1⅞"-12 thread.

This elbow meets the standards for SAE 070302, and it is made of steel. In addition, it is an elbow, and has a 1½"-11½ x 1⅞"-12 thread.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 45.5 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, is made of steel, and has a M22x1.5 thread. Plus, it has a 27 mm hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 45.5 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, is made of steel, and has a M22x1.5 thread. Plus, it has a 27 mm hex size.

This industrial fitting hydraulic hose adapter has a 90 Degrees elbow shape and straight thread fitting connections of male 1 1/16"-12 with an O-ring boss to a female swivel with a 3/4"-14 thread size. An ORB connection has an O-ring and straight threads that form a tight seal when joined to a corresponding fitting. This adapter has a maximum dynamic pressure of 3000 PSI.

This industrial fitting hydraulic hose adapter has a 90 Degrees elbow shape and straight thread fitting connections of male 1 1/16"-12 with an O-ring boss to a female swivel with a 3/4"-14 thread size. An ORB connection has an O-ring and straight threads that form a tight seal when joined to a corresponding fitting. This adapter has a maximum dynamic pressure of 3000 PSI.