Steel Hydraulic Hose Adapters

This zinc-coated carbon steel hydraulic pipe tee is rigid and non-crimpable. Rated for a maximum working pressure of 3000 PSI at 70 Degrees F, it is intended for use with hole dash size -4 pipe, it connects 3 lengths of male 1/4"-18 NPT pipe together. O-ring not included.

This zinc-coated carbon steel hydraulic pipe tee is rigid and non-crimpable. Rated for a maximum working pressure of 3000 PSI at 70 Degrees F, it is intended for use with hole dash size -4 pipe, it connects 3 lengths of male 1/4"-18 NPT pipe together. O-ring not included.

Keep out dust and dirt with this rigid hydraulic hose cap. This cap is made for hoses with a hole dash size of 10 and can withstand a maximum pressure of 4000 psi at a temperature of 70 Degrees F. Hose fitting A is female and has a M16 x 1.5 millimetre thread size, with a DIN 24 light connection type. Hose fitting B is male and has a 1 1/6"-12 thread size, with a JIC connection type. Each cap is made from carbon steel with a zinc coating and includes a Buna N O-ring.

Keep out dust and dirt with this rigid hydraulic hose cap. This cap is made for hoses with a hole dash size of 10 and can withstand a maximum pressure of 4000 psi at a temperature of 70 Degrees F. Hose fitting A is female and has a M16 x 1.5 millimetre thread size, with a DIN 24 light connection type. Hose fitting B is male and has a 1 1/6"-12 thread size, with a JIC connection type. Each cap is made from carbon steel with a zinc coating and includes a Buna N O-ring.

This swivel hydraulic adaptor is for hoses with a hole dash size of 30. This straight-fitting adaptor can withstand a maximum pressure of 3000 psi at a temperature of 70 Degrees F. Hose fitting A is female and M42 x 2.0 millimetres in thread size, with a metric connection type. Hose fitting B is male and 1 5/8"-12 in thread size, with a JIC connector type. This adaptor is made from carbon steel with a zinc finish.

This swivel hydraulic adaptor is for hoses with a hole dash size of 30. This straight-fitting adaptor can withstand a maximum pressure of 3000 psi at a temperature of 70 Degrees F. Hose fitting A is female and M42 x 2.0 millimetres in thread size, with a metric connection type. Hose fitting B is male and 1 5/8"-12 in thread size, with a JIC connector type. This adaptor is made from carbon steel with a zinc finish.

This hydraulic adaptor is Male DIN Heavy x Male DIN Heavy and has a straight shape with a rigid movement fit. This adaptor is SAE-approved and made with zinc and carbon steel. The DIN hose fitting A is M52 x 2 inches in diameter and the DIN hose fitting B is M36 x 2 inches in diameter with a size-38 hole dash.

This hydraulic adaptor is Male DIN Heavy x Male DIN Heavy and has a straight shape with a rigid movement fit. This adaptor is SAE-approved and made with zinc and carbon steel. The DIN hose fitting A is M52 x 2 inches in diameter and the DIN hose fitting B is M36 x 2 inches in diameter with a size-38 hole dash.

This hydraulic adaptor is Male ORB x Male DIN Light and has a 90-degree elbow shape and a swivel movement fit. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 4000 at 70 Degrees F. The ORB is 9/16"-18 thread size and the DIN is M16 x 1.5 inches in diameter with a size six hole dash. SAE-approved and O-Ring included.

This hydraulic adaptor is Male ORB x Male DIN Light and has a 90-degree elbow shape and a swivel movement fit. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 4000 at 70 Degrees F. The ORB is 9/16"-18 thread size and the DIN is M16 x 1.5 inches in diameter with a size six hole dash. SAE-approved and O-Ring included.

This hydraulic adaptor is Male ORB x Male DIN Light and has a 90-degree elbow shape and a swivel movement fit. The ORB is 1 1/16"-20 thread size and the DIN is M30 x 1.5 inches in diameter with a size-12 hole dash. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 3000 at 70 Degrees F. SAE-approved and O-Ring included.

This hydraulic adaptor is Male ORB x Male DIN Light and has a 90-degree elbow shape and a swivel movement fit. The ORB is 1 1/16"-20 thread size and the DIN is M30 x 1.5 inches in diameter with a size-12 hole dash. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 3000 at 70 Degrees F. SAE-approved and O-Ring included.

This hydraulic adaptor is Male ORB x Male ORS and has a 45-degree elbow shape with a rigid movement fit. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 4000 at 70 Degrees F. The ORB is 9/16"-18 thread size and the ORS is 11/16"-16 thread size with a size six hole dash. SAE-approved and O-Ring included.

This hydraulic adaptor is Male ORB x Male ORS and has a 45-degree elbow shape with a rigid movement fit. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 4000 at 70 Degrees F. The ORB is 9/16"-18 thread size and the ORS is 11/16"-16 thread size with a size six hole dash. SAE-approved and O-Ring included.

Made with a size of 22 millimetres, this cutting ring sleeve is intended for hydraulic hoses with a hose dash size of 15. This cutting ring sleeve is made with carbon steel, is zinc-plated, and rigid.

Made with a size of 22 millimetres, this cutting ring sleeve is intended for hydraulic hoses with a hose dash size of 15. This cutting ring sleeve is made with carbon steel, is zinc-plated, and rigid.

This hydraulic hose tube nut has a hose fitting A size of 1/4"-19 with male threading and a BSPP connection type, and a hose fitting B size of 9/16"-18, with male threading with a JIC connection type. This tube nut is meant to be used with hose dash size four, and is made from carbon steel, is rigid, and zinc-plated. This tube nut comes with a maximum working pressure of 4000 at 70 Degrees F.

This hydraulic hose tube nut has a hose fitting A size of 1/4"-19 with male threading and a BSPP connection type, and a hose fitting B size of 9/16"-18, with male threading with a JIC connection type. This tube nut is meant to be used with hose dash size four, and is made from carbon steel, is rigid, and zinc-plated. This tube nut comes with a maximum working pressure of 4000 at 70 Degrees F.

Made with carbon steel, and zinc-plated, this 45 Degrees elbow is compatible with a 3/4-inch pipe size, and is meant to be used with a hole dash size of 12. This elbow has male by female threading, in size 1 1/16"-12 by 3/4"-14, with ORB by NPSM connection types. This swivel elbow contains a maximum working pressure of 3000 at 70 Degrees F, and includes O-rings.

Made with carbon steel, and zinc-plated, this 45 Degrees elbow is compatible with a 3/4-inch pipe size, and is meant to be used with a hole dash size of 12. This elbow has male by female threading, in size 1 1/16"-12 by 3/4"-14, with ORB by NPSM connection types. This swivel elbow contains a maximum working pressure of 3000 at 70 Degrees F, and includes O-rings.

This swivel elbow contains a maximum working pressure of 2000 at 70 Degrees F, and made with carbon steel with zinc plating. This elbow has female by male threading, in size 1 7/8"-12 by 1 1/2"-11 1/2, with NPSM by ORB connection types. This 45 Degrees elbow is meant to be used with a hole dash size of 24.

This swivel elbow contains a maximum working pressure of 2000 at 70 Degrees F, and made with carbon steel with zinc plating. This elbow has female by male threading, in size 1 7/8"-12 by 1 1/2"-11 1/2, with NPSM by ORB connection types. This 45 Degrees elbow is meant to be used with a hole dash size of 24.

This 90 Degrees flange elbow adapter is made of carbon steel, zinc plates, and is intended for use with a hole dash size of 16. This rigid elbow adapter comes with a flange size of one inch, and a working pressure of 3000 at 70 Degrees F. This adapter comes with a male thread in size 1 3/4" by 1 7/8"-12, with flange by JIC connection types.

This 90 Degrees flange elbow adapter is made of carbon steel, zinc plates, and is intended for use with a hole dash size of 16. This rigid elbow adapter comes with a flange size of one inch, and a working pressure of 3000 at 70 Degrees F. This adapter comes with a male thread in size 1 3/4" by 1 7/8"-12, with flange by JIC connection types.

This rigid 90-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 8, has a maximum working pressure of 4000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type ORB, and measures 3/4"-16. Fitting B is male, connection type JIC, and measures 7/8"-14. The O-ring is included and is made of Buna N.

This rigid 90-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 8, has a maximum working pressure of 4000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type ORB, and measures 3/4"-16. Fitting B is male, connection type JIC, and measures 7/8"-14. The O-ring is included and is made of Buna N.

This rigid 90-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 12, has a maximum working pressure of 3000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type ORB, and measures 1 1/16"-12. Fitting B is male, connection type JIC, and measures 9/16"-18. The O-ring is included and is made of Buna N.

This rigid 90-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 12, has a maximum working pressure of 3000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type ORB, and measures 1 1/16"-12. Fitting B is male, connection type JIC, and measures 9/16"-18. The O-ring is included and is made of Buna N.