Stainless Steel Stick Welding Electrodes

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 5/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 5/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

Excellent high-speed electrode for fillet welds. Exceptionally fast when used down-hand in properly designed weld joints or horizontal fillet welds, where equal leg fillets are desired. When a drag welding technique is used, the electrode operates well on either AC or DC (electrode negative) power.

Excellent high-speed electrode for fillet welds. Exceptionally fast when used down-hand in properly designed weld joints or horizontal fillet welds, where equal leg fillets are desired. When a drag welding technique is used, the electrode operates well on either AC or DC (electrode negative) power.

This Hobart 418AC mild-steel electrode features excellent re-strike capabilities, and is used with AC straight and reverse polarities. It is 14 inches long with a 3/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418AC mild-steel electrode features excellent re-strike capabilities, and is used with AC straight and reverse polarities. It is 14 inches long with a 3/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 3/16-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 3/16-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards.

This Hobart 14A, all-position, mild-steel electrode is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. It offers outstanding slag removal and bead appearance, and can be operated with DCEN, AC, or DCEP power. It is 14 inches long with a 5/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 14A, all-position, mild-steel electrode is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. It offers outstanding slag removal and bead appearance, and can be operated with DCEN, AC, or DCEP power. It is 14 inches long with a 5/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 50-pound can.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 50-pound can.

Designed for use with AC or DCEN power sources, this Hobart 335A all-position, cellulose-based, mild-steel electrode provides stable arc characteristics and good penetration. It is 14 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 60,000 PSI. Meets CSA standards. Available in a 10-pound package.

Designed for use with AC or DCEN power sources, this Hobart 335A all-position, cellulose-based, mild-steel electrode provides stable arc characteristics and good penetration. It is 14 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 60,000 PSI. Meets CSA standards. Available in a 10-pound package.

Designed for use with AC or DCEN power sources, this Hobart 335A all-position, cellulose-based, mild-steel electrode provides stable arc characteristics and good penetration. It is 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 60,000 PSI. Meets CSA standards. Available in a 10-pound package.

Designed for use with AC or DCEN power sources, this Hobart 335A all-position, cellulose-based, mild-steel electrode provides stable arc characteristics and good penetration. It is 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 60,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 3/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 3/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

An all-position electrode, Hobart 14A is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. This electrode offers outstanding slag removal and bead appearance and can be operated with DCEN, AC or DCEP power.

An all-position electrode, Hobart 14A is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. This electrode offers outstanding slag removal and bead appearance and can be operated with DCEN, AC or DCEP power.

This Hobart 14A, all-position, mild-steel electrode is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. It offers outstanding slag removal and bead appearance, and can be operated with DCEN, AC, or DCEP power. It is 14 inches long with a 3/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 14A, all-position, mild-steel electrode is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. It offers outstanding slag removal and bead appearance, and can be operated with DCEN, AC, or DCEP power. It is 14 inches long with a 3/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

Designed for use with AC or DCEN power sources, this Hobart 335A all-position, cellulose-based, mild-steel electrode provides stable arc characteristics and good penetration. It is 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 60,000 PSI. Meets CSA standards. Available in a 10-pound package.

Designed for use with AC or DCEN power sources, this Hobart 335A all-position, cellulose-based, mild-steel electrode provides stable arc characteristics and good penetration. It is 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 60,000 PSI. Meets CSA standards. Available in a 10-pound package.