Product ITEM is unavailable. See products from the same category below.
Stainless Steel Stick Welding Electrodes
Stainless steel stick welding electrodes provide filler metal for welding stainless steel and other compatible metals in SMAW (shielded metal arc welding) tasks. These welding rods have a coating that releases shielding gas as it's heated, which helps keep contaminants out of the weld pool. This means the electrodes don't require an external source of shielding gas, so they can be used in windy outdoor areas.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA Ultra 11 electrode is made of mild steel. In addition, it is designed for use with the following materials: steel. It has an overall length of 12 inches, an overall diameter of 3/32 inches, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS E6011, CWB E4311.
This LA Ultra 11 electrode is made of mild steel. In addition, it is designed for use with the following materials: steel. It has an overall length of 12 inches, an overall diameter of 3/32 inches, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS E6011, CWB E4311.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 1/4-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 1/4-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 8018-C2 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 3/16 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E8018-C2-H4.
This LA 8018-C2 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 3/16 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E8018-C2-H4.
This MNR 4 X 4 specialty welding electrode measures 14 inches long with an 1/8-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a five-kilogram package.
This MNR 4 X 4 specialty welding electrode measures 14 inches long with an 1/8-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a five-kilogram package.
This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 14 inches long with an 1/8-inch diameter and a 32% elongation. Available in a 0.45-kilogram package.
This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 14 inches long with an 1/8-inch diameter and a 32% elongation. Available in a 0.45-kilogram package.
This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 12 inches long with a 3/32-inch diameter and a 32% elongation. Available in a five-kilogram package.
This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 12 inches long with a 3/32-inch diameter and a 32% elongation. Available in a five-kilogram package.
This LA Ultra 11 electrode is made of mild steel. In addition, it is designed for use with the following materials: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS E6011, CWB E4311.
This LA Ultra 11 electrode is made of mild steel. In addition, it is designed for use with the following materials: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS E6011, CWB E4311.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.
This MNR Tri-Cast, DC + AC, specialty welding electrode is made with cast iron, copper, and nickel for a unique combination of softness, ductility, and a minimum tensile strength of 55,000 PSI. It is 12 inches in length with a 3/32-inch diameter, and available in a 0.45-kilogram package.
This MNR Tri-Cast, DC + AC, specialty welding electrode is made with cast iron, copper, and nickel for a unique combination of softness, ductility, and a minimum tensile strength of 55,000 PSI. It is 12 inches in length with a 3/32-inch diameter, and available in a 0.45-kilogram package.
This low-hydrogen, AC/DCEP, steel electrode has a minimum tensile strength of 79,000 PSI. It is 14 inches in length with an 1/8-inch diameter, and is available in a five-kilogram box.
This low-hydrogen, AC/DCEP, steel electrode has a minimum tensile strength of 79,000 PSI. It is 14 inches in length with an 1/8-inch diameter, and is available in a five-kilogram box.
This MNR Cast 55, DC + AC, specialty welding electrode is made of 55% nickel cast iron with 60% increased nickel content for crack resistance and maximum machinability. It is "barium free" for joining dirty and contaminated cast irons, and welds a wide variety of ductile, nodular, and malleable cast irons. It is 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 50,000 PSI. Available in a five-kilogram package.
This MNR Cast 55, DC + AC, specialty welding electrode is made of 55% nickel cast iron with 60% increased nickel content for crack resistance and maximum machinability. It is "barium free" for joining dirty and contaminated cast irons, and welds a wide variety of ductile, nodular, and malleable cast irons. It is 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 50,000 PSI. Available in a five-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This MNR 4 X 4 specialty welding electrode measures 14 inches long with an 1/8-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.
This MNR 4 X 4 specialty welding electrode measures 14 inches long with an 1/8-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
