Product ITEM is unavailable. See products from the same category below.
Solid Router Bits
Solid router bits are used to make plunge and profile cuts in solid surfaces. The geometry of the router bit helps determine the material it's best suited for use with. These router bits are used in CNC routers, machining centres, and milling machines for manufacturing and production applications.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, 3/16-inch cutter diameter, ¼-inch shank diameter, two-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, 3/16-inch cutter diameter, ¼-inch shank diameter, two-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 62-600 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, 1½-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 62-600 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, 1½-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 21 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 21 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 63-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, 2½-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, 2½-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 60-100MW series compression spiral routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 60-100MW series compression spiral routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 52-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures one-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, three-inch overall length, two flutes, and 11 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 52-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures one-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, three-inch overall length, two flutes, and 11 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅜-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅜-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, two-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, two-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
