Product ITEM is unavailable. See products from the same category below.
Sledge Hammers
Sledge hammers deliver high-impact blows to drive stakes and posts, loosen parts, strike wedges, and perform demolition work. Also known as sledges, they combine a heavy, double-faced head with a long handle to hit harder than lighter, shorter hammers. Their handle is held with two hands and requires ample space for the large swing to build momentum and maximize striking force.
This sledge hammer has a length of 24 inch with an eight-pound head weight. The steel handle is 24 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of copper, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 24 inch with an eight-pound head weight. The steel handle is 24 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of copper, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 16 inch with a six-pound head weight. The steel handle is 16 inch long, is black. It features bars are locked with the hammer head using steel locking plates, handle made up of four sprin and more and meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 16 inch with a six-pound head weight. The steel handle is 16 inch long, is black. It features bars are locked with the hammer head using steel locking plates, handle made up of four sprin and more and meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 35 inch with a six-pound head weight. The wood handle is 838 mm long. It meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a plain grip.
This sledge hammer has a length of 35 inch with a six-pound head weight. The wood handle is 838 mm long. It meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a plain grip.
This sledge hammer has a length of 34 inch with an eight-pound head weight. The fibreglass handle is 786 mm long and is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a textured grip.
This sledge hammer has a length of 34 inch with an eight-pound head weight. The fibreglass handle is 786 mm long and is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a textured grip.
This sledge hammer has a length of 30 inch with a 10-pound head weight. The steel handle is 30 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 30 inch with a 10-pound head weight. The steel handle is 30 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 6 lbs, 30 inch handle length.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 6 lbs, 30 inch handle length.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 8 lbs, 24 inch handle length.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 8 lbs, 24 inch handle length.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 8 lbs, 30 inch handle length.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 8 lbs, 30 inch handle length.
This sledge hammer has a length of 30 inch with a 12-pound head weight. The steel handle is 30 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 30 inch with a 12-pound head weight. The steel handle is 30 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 14 lbs, 30 inch handle length.
Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle. 14 lbs, 30 inch handle length.
This sledge hammer has a length of 36 inch with a 10-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with a 10-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with a 14-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with a 14-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 24 inch with a six-pound head weight. The steel handle is 24 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 24 inch with a six-pound head weight. The steel handle is 24 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with an eight-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with an eight-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with a 12-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 36 inch with a 12-pound head weight. The steel handle is 36 inch long, is black. It meets the standards for ASME B107.400. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This sledge hammer has a length of 34 inch with a 12-pound head weight. The fibreglass handle is 796 mm long and is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a textured grip.
This sledge hammer has a length of 34 inch with a 12-pound head weight. The fibreglass handle is 796 mm long and is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a textured grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
