Product ITEM is unavailable. See products from the same category below.
Sledge Hammers
Sledge hammers deliver high-impact blows to drive stakes and posts, loosen parts, strike wedges, and perform demolition work. Also known as sledges, they combine a heavy, double-faced head with a long handle to hit harder than lighter, shorter hammers. Their handle is held with two hands and requires ample space for the large swing to build momentum and maximize striking force.
For striking extremely hard metal surfaces such as hardened pins, railroad spikes and cutting tools. Maximum 30 Rockwell C hardness. Similar hardness to brass. Reduces shearing when striking hardened steel. Blue heads marked "S" for "soft". Ergo Power(R) super grip black handles.
For striking extremely hard metal surfaces such as hardened pins, railroad spikes and cutting tools. Maximum 30 Rockwell C hardness. Similar hardness to brass. Reduces shearing when striking hardened steel. Blue heads marked "S" for "soft". Ergo Power(R) super grip black handles.
This Ergo-Power series sledge hammer has a length of 16 inch with a six-pound head weight. The fibreglass handle is 16 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series sledge hammer has a length of 16 inch with a six-pound head weight. The fibreglass handle is 16 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series sledge hammer has a length of 32 inch with an eight-pound head weight. The fibreglass handle is 32 inch long and is yellow. It features industrial grade heads, mould injected protective covering over handle and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series sledge hammer has a length of 32 inch with an eight-pound head weight. The fibreglass handle is 32 inch long and is yellow. It features industrial grade heads, mould injected protective covering over handle and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face sledge hammer has a length of 32 inch with a 16-pound head weight. The fibreglass handle is 32 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face sledge hammer has a length of 32 inch with a 16-pound head weight. The fibreglass handle is 32 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series sledge hammer has a length of 32 inch with an eight-pound head weight. The fibreglass handle is 32 inch long and is yellow. It features industrial grade heads, mould injected protective covering over handle and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series sledge hammer has a length of 32 inch with an eight-pound head weight. The fibreglass handle is 32 inch long and is yellow. It features industrial grade heads, mould injected protective covering over handle and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 2½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 2½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 1½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 1½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This engineer's hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This engineer's hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This Classic Nuplaglas series soft face sledge hammer has a length of 18 inch with a six-pound head weight. The fibreglass handle is 18 inch long, is black/yellow. It features non-sparking and meets the standards for ASME. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series soft face sledge hammer has a length of 18 inch with a six-pound head weight. The fibreglass handle is 18 inch long, is black/yellow. It features non-sparking and meets the standards for ASME. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This engineer's hammer has a length of 14 inch with a three-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This engineer's hammer has a length of 14 inch with a three-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This Ergo-Power series soft face sledge hammer has a length of 32 inch with an eight-pound head weight. The fibreglass handle is 32 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face sledge hammer has a length of 32 inch with an eight-pound head weight. The fibreglass handle is 32 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.