!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.

Filter Results By

Applied Filters
Clear All

Shop By
Brand
Price
For Material Type
For Fluid Type
Series
Container Size
Container Type
Minimum Operating Temperature
Maximum Operating Temperature
Working Time
Full Cure Time
Colour
VOC Content
Standards

RTV Gasket Makers

RTV (room temperature vulcanizing) gasket makers have better gap-filling properties than anaerobic gasket makers which makes them more suited for assemblies that have wider gaps with surfaces that are not precision machined. They cure when exposed to air at room temperature, where anaerobic gasket makers cure in the absence of air. The liquid form of these gasket makers replaces the need for a precut material gasket by filling the space between two mating surfaces. Also called formed-in-place (FIP) gaskets, they seep into pits and scratches to provide a clean surface and create any shape needed. RTV gasket makers are lighter weight and thicker than cork, paper, or rubber gaskets.

https://catalogue.grainger.ca/?hybris=true

21 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • LOCTITE
  • GASKET MAKER, ANAEROBIC, GEL, TEMP RANGE -10 TO 150 ° C, CURE 24 HR, PURPLE, 50 ML, METHACRYLATE
  • Item # LCT38625
  • Mfr. Model # 544422
  • EHC: EHC :
  • This anaerobic gasket maker is made for use on rigid machined flange assemblies with less than a 0.010-inch gap. The purple-coloured gel fully cures in 24 hours and begins to harden in 10 minutes. It has a temperature range of -10 to 150 Degrees C and a flashpoint of 93 Degrees C. This methacrylate-based adhesive is resistant to low pressures and comes in a 50-millimetre tube.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1247
  • LOCTITE
  • GASKET MAKER, RTV, PASTE, TEMP RANGE -59 TO 329 ° C, CURE 24 HR, GREY, 80 ML, SILICONE
  • Item # LCT38633
  • Mfr. Model # 545491
  • EHC: EHC :
  • This sensor-safe, room temperature vulcanizing gasket maker is designed for high torque applications. The non-corrosive, grey paste can withstand a temperature range of -59 to 329 Degrees C and has a flashpoint of greater than 93 Degrees C. The low odour sealant begins to harden in 30 minutes and fully cures in 24 hours. This product comes in an 80-millilitre tube.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1247
  • LOCTITE
  • RTV GASKET MAKER, SI 5900, 10.14 FL OZ, CARTRIDGE, BLACK, OIL RESISTANT
  • Item # LCT212184R
  • Mfr. Model # 212184
  • EHC: EHC :
  • This SI 5900 gasket maker is black and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 15 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • LOCTITE
  • RTV GASKET MAKER, SI 598, 2.37 FL OZ, TUBE, BLACK, OIL RESISTANT/SENSOR SAFE
  • Item # LCT234609R
  • Mfr. Model # 234609
  • EHC: EHC :
  • This SI 598 gasket maker is black and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • LOCTITE
  • RTV GASKET MAKER, SI 5699, 2.37 FL OZ, TUBE, GREY, OIL RESISTANT
  • Item # LCT135275R
  • Mfr. Model # 135275
  • EHC: EHC :
  • This SI 5699 gasket maker is grey and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1252
  • LOCTITE
  • RTV GASKET MAKER, SI 587, 10.14 FL OZ, CARTRIDGE, BLUE, OIL RESISTANT
  • Item # LCT234590R
  • Mfr. Model # 234590
  • EHC: EHC :
  • This SI 587 gasket maker is blue and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • LOCTITE
  • GASKET MAKER, RTV, PASTE, TEMP RANGE -59 TO 329 ° C, CURE 24 HR, GREY, 190 ML, SILICONE
  • Item # LCT40505
  • Mfr. Model # 756302
  • EHC: EHC :
  • This sensor-safe, room temperature vulcanizing gasket maker is designed for high torque applications. The non-corrosive, grey paste can withstand a temperature range of -59 to 329 Degrees C and has a flashpoint of greater than 93 Degrees C. The low odour sealant begins to harden in 30 minutes and fully cures in 24 hours. This product comes in a 190-millilitre tube.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • Available only while supplies last. Quantities may be limited. The Item is FINAL SALE. View Replacement
  • This product is no longer available online.

    View Replacement.

  • LOCTITE
  • GASKET MAKER,10.14 FL OZ,CARTRIDGE,BLUE
  • Item # LCT58775
  • Mfr. Model # 58775
  • EHC: EHC :
  • 587 high performance blue silicone maker forms tough, flexible gaskets directly on the flange. Resistant, low odor, non-corrosive, low volatility. Withstands temperatures to 260 degrees C (500 degrees F). Fills gaps to 0.25 in., 300 mL cartridge.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1255
  • LOCTITE
  • RTV GASKET MAKER, SI 5999, 10.14 OZ, CARTRIDGE, GREY, HIGH-TEMP RESISTANT/OIL RESISTANT
  • Item # LCT231230R
  • Mfr. Model # 231230
  • EHC: EHC :
  • This SI 5999 gasket maker is grey and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • LOCTITE
  • RTV GASKET MAKER, SI 5920, 2.37 FL OZ, TUBE, COPPER, HIGH-TEMPERATURE RESISTANT
  • Item # LCT198818R
  • Mfr. Model # 198818
  • EHC: EHC :
  • This SI 5920 gasket maker is copper and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of one hour.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • LOCTITE
  • RTV GASKET MAKER, SI 5699, 10.14 FL OZ, CARTRIDGE, GREY, OIL RESISTANT
  • Item # LCT135270R
  • Mfr. Model # 135270
  • EHC: EHC :
  • This SI 5699 gasket maker is grey and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • LOCTITE
  • RTV GASKET MAKER, SI 598, 10.14 FL OZ, CARTRIDGE, BLACK, OIL RESISTANT/SENSOR SAFE
  • Item # LCT135508R
  • Mfr. Model # 135508
  • EHC: EHC :
  • This SI 598 gasket maker is black and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1255
  • LOCTITE
  • RTV GASKET MAKER, SI 5920, 10.14 FL OZ, CARTRIDGE, COPPER, HIGH-TEMPERATURE RESISTANT
  • Item # LCT235479R
  • Mfr. Model # 235479
  • EHC: EHC :
  • This SI 5920 gasket maker is copper and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of one hour.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1255
  • LOCTITE
  • RTV GASKET MAKER, SI 587, 2.37 FL OZ, TUBE, BLUE, OIL RESISTANT
  • Item # LCT135504R
  • Mfr. Model # 135504
  • EHC: EHC :
  • This SI 587 gasket maker is blue and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.

    View more View less
  • SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list