Product ITEM is unavailable. See products from the same category below.
Retaining-Ring Pliers & Sets
Retaining-ring pliers install and remove snap rings that fit into a bore or onto a shaft and hold components in place. Also known as circlip pliers, their tips provide a firm grip on the rings to prevent them from flying off. Each pair of pliers adjusts its jaws to accommodate rings within a set diameter range. Retaining-ring pliers are commonly used to place rings on actuators, gear assemblies, motor shafts, and other machinery.
18 piece retaining ring pliers set. Includes 1 internal and 1 external pliers. Covers: External 1-1/2 to 3-3/4 inch: Internal 2-7/16 to 4 inch Contains 16 interchangeable tips: 2 each 0, 15, 45, 90 degrees x .108 inch: 2 each 0, 15, 45, 90 degrees x 0.120 inch.
18 piece retaining ring pliers set. Includes 1 internal and 1 external pliers. Covers: External 1-1/2 to 3-3/4 inch: Internal 2-7/16 to 4 inch Contains 16 interchangeable tips: 2 each 0, 15, 45, 90 degrees x .108 inch: 2 each 0, 15, 45, 90 degrees x 0.120 inch.
6-1/8 inch external retaining ring pliers. Tip angle 0 degrees. Tip size 0.038 inch. Shaft diameter 1/4 to 1 inch. Use with external retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
6-1/8 inch external retaining ring pliers. Tip angle 0 degrees. Tip size 0.038 inch. Shaft diameter 1/4 to 1 inch. Use with external retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
5-3/8 inch internal retaining ring pliers. Tip angle 45 degrees. Tip size 0.038 inch. Shaft diameter 3/8 to 1 inch. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
5-3/8 inch internal retaining ring pliers. Tip angle 45 degrees. Tip size 0.038 inch. Shaft diameter 3/8 to 1 inch. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.070 inch. Length 7-3/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.070 inch. Length 7-3/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.047 inch. Length 5-3/4 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.047 inch. Length 5-3/4 inches.
16-1/2 inch internal/external large retaining ring pliers. Tip angle 0 degrees. Tip size 0.120 inch 3-1/16 to 6 inch shaft diameter. Spring loaded ratchet mechanism. Replaceable straight tips 45 and 90 degrees, possible to remove/install rings in most applications.
16-1/2 inch internal/external large retaining ring pliers. Tip angle 0 degrees. Tip size 0.120 inch 3-1/16 to 6 inch shaft diameter. Spring loaded ratchet mechanism. Replaceable straight tips 45 and 90 degrees, possible to remove/install rings in most applications.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.047 inch. Length 5-7/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.047 inch. Length 5-7/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 90 degrees. Tip size 0.090 inch. Length 8-5/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 90 degrees. Tip size 0.090 inch. Length 8-5/8 inches.
5-3/8 inch internal retaining ring pliers. Tip angle 0 degrees. Tip size 0.038 inch. Shaft diameter 3/8 to 1 inch. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
5-3/8 inch internal retaining ring pliers. Tip angle 0 degrees. Tip size 0.038 inch. Shaft diameter 3/8 to 1 inch. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
9 inch internal retaining ring pliers. Tip angle 0 degrees. Tip size 0.090 inch. Shaft diameter 1-13/16 to 3 inches. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
9 inch internal retaining ring pliers. Tip angle 0 degrees. Tip size 0.090 inch. Shaft diameter 1-13/16 to 3 inches. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 90 degrees. Tip size 0.047 inch. Length 5-11/16 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 90 degrees. Tip size 0.047 inch. Length 5-11/16 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.038 inch. Length 5-3/4 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.038 inch. Length 5-3/4 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.090 inch. Length 9 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.090 inch. Length 9 inches.
5-3/8 inch internal retaining ring pliers. Tip angle 0 degrees. Tip size 0.025 inch. Shaft diameter 1/4 to 5/8 inch. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
5-3/8 inch internal retaining ring pliers. Tip angle 0 degrees. Tip size 0.025 inch. Shaft diameter 1/4 to 5/8 inch. Use with internal retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
This retaining ring pliers has a length of 5⅜ inch, plus it weighs 0.13 pounds. The handle is red. It features precision ground tips and meets the standards for GGG-P-480, ANSI B107.19. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 5⅜ inch, plus it weighs 0.13 pounds. The handle is red. It features precision ground tips and meets the standards for GGG-P-480, ANSI B107.19. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 7¼ inch, plus it weighs 0.33 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 7¼ inch, plus it weighs 0.33 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
