Respirator Fit Testing

This bitter taste fit test solution has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This bitter taste fit test solution has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This bitter taste sensitivity solution is used to test the sensitivity of the respirator wearer to a bitter solution and has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This bitter taste sensitivity solution is used to test the sensitivity of the respirator wearer to a bitter solution and has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This sweet taste fit test solution has saccharin as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This sweet taste fit test solution has saccharin as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This smoke fit test kit has a vinyl protective pouch, hand operated air bulb with 2 2/5 ounces capacity, a beaker tool, six smoke tubes, and poly tubing. It has a stannic chloride solution that comes in a glass container with rubber caps for protection and storage. The kit is for use with air-purifying respirators.

This smoke fit test kit has a vinyl protective pouch, hand operated air bulb with 2 2/5 ounces capacity, a beaker tool, six smoke tubes, and poly tubing. It has a stannic chloride solution that comes in a glass container with rubber caps for protection and storage. The kit is for use with air-purifying respirators.

This sweet taste sensitivity solution is used to test the sensitivity of the respirator wearer to a saccharin solution. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This sweet taste sensitivity solution is used to test the sensitivity of the respirator wearer to a saccharin solution. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This Bitrex test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter test solution ampules in a box.

This Bitrex test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter test solution ampules in a box.

This Bitrex sensitivity solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter sensitivity solution ampules in a box.

This Bitrex sensitivity solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter sensitivity solution ampules in a box.

This Saccharin test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with Saccharin qualitative fit test kit. There are six Saccharin test solution ampules in a box.

This Saccharin test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with Saccharin qualitative fit test kit. There are six Saccharin test solution ampules in a box.

This test hood is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. The hood can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate PRE-FILTER. There are two hoods in a pack.

This test hood is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. The hood can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate PRE-FILTER. There are two hoods in a pack.

This banana oil qualitative fit test ampule comes in white and meets the NIOSH standard. There are 10 ampules in a pack.

This banana oil qualitative fit test ampule comes in white and meets the NIOSH standard. There are 10 ampules in a pack.

This qualitative fit test apparatus includes a hood, collar, two nebulizers, a bitter-tasting sensitivity solution, a bitter-tasting fit test solution, and laminated user instructions. It uses a test solution of Bitrex to produce a very bitter taste. The apparatus is suitable for use with any particulate respirator or any gas/vapour respirator with a particulate filter.

This qualitative fit test apparatus includes a hood, collar, two nebulizers, a bitter-tasting sensitivity solution, a bitter-tasting fit test solution, and laminated user instructions. It uses a test solution of Bitrex to produce a very bitter taste. The apparatus is suitable for use with any particulate respirator or any gas/vapour respirator with a particulate filter.

This nebulizer is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. It provides a fast and easy method for performing qualitative fit testing.

This nebulizer is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. It provides a fast and easy method for performing qualitative fit testing.

This aspirator bulb has an irritant smoke fit testing protocol and is designed for use with a standard smoke test kit.

This aspirator bulb has an irritant smoke fit testing protocol and is designed for use with a standard smoke test kit.

These fit check ampules have 0.33 millilitre fluid volume with iso amyl acetate fit testing protocol. They are designed for use with the banana oil qualitative fit test kit. There are 10 ampules in a box.

These fit check ampules have 0.33 millilitre fluid volume with iso amyl acetate fit testing protocol. They are designed for use with the banana oil qualitative fit test kit. There are 10 ampules in a box.

This fit-test adapter with an air-purifying respirator system comes in black. It is for use with PortaCount quantitative fit tester and North 5500/7700/5400/7600 series facepieces.

This fit-test adapter with an air-purifying respirator system comes in black. It is for use with PortaCount quantitative fit tester and North 5500/7700/5400/7600 series facepieces.

This Bitrex fit test kit has a poly-coated hood with a clear viewing window, sensitivity nebulizer, test nebulizer with an atomizer, wire cleaner, box of six glass sensitivity solution ampules, and box of six glass test solution ampules. It contains 2.5 cc of solution and averages 3 to 5 fit tests per tube. The kit is for use with disposable and reusable dust/mist respirators.

This Bitrex fit test kit has a poly-coated hood with a clear viewing window, sensitivity nebulizer, test nebulizer with an atomizer, wire cleaner, box of six glass sensitivity solution ampules, and box of six glass test solution ampules. It contains 2.5 cc of solution and averages 3 to 5 fit tests per tube. The kit is for use with disposable and reusable dust/mist respirators.