Quick-Cutting Spade Drill Bits

Drill clean, smooth holes through hard and soft woods with this heat treated auger bit. This drill bit has a coarse screw point with a single-spur cutting edge. Measures 5/16 inches in diameter with a 7/32-inch shank size and a twist length of 4 1/2 inches for an overall length of 7 1/2 inches. Fits an I-100 power drill.

Drill clean, smooth holes through hard and soft woods with this heat treated auger bit. This drill bit has a coarse screw point with a single-spur cutting edge. Measures 5/16 inches in diameter with a 7/32-inch shank size and a twist length of 4 1/2 inches for an overall length of 7 1/2 inches. Fits an I-100 power drill.

Attach this heat-treated auger bit to your 1-100 power drill when working on wood. Leave smooth, clean holes with its coarse screw point and single-spur cutting edge with a solid centre. This drill bit is 7 1/2 inches long, with a diameter of 1 1/4 inches, a twist length of 4 1/2 inches, and a shank size of 7/16 inches.

Attach this heat-treated auger bit to your 1-100 power drill when working on wood. Leave smooth, clean holes with its coarse screw point and single-spur cutting edge with a solid centre. This drill bit is 7 1/2 inches long, with a diameter of 1 1/4 inches, a twist length of 4 1/2 inches, and a shank size of 7/16 inches.

Get clean, smooth cuts through wood with this heat-treated auger bit. The coarse screw point, single-spur cutting edge combined with its solid centre design allows you to finish the job faster while keeping the drill bit intact. It is built with a diameter of 3/4 inches, a twist length of 4 1/2 inches, a 5/16-inch shank size, and an overall length of 7 1/2 inches. It is compatible with an 1-100 power drill.

Get clean, smooth cuts through wood with this heat-treated auger bit. The coarse screw point, single-spur cutting edge combined with its solid centre design allows you to finish the job faster while keeping the drill bit intact. It is built with a diameter of 3/4 inches, a twist length of 4 1/2 inches, a 5/16-inch shank size, and an overall length of 7 1/2 inches. It is compatible with an 1-100 power drill.

This full-length heat treated bit has a coarse screw point with a single-spur cutting edge for smooth, clean holes drilled into hard and soft woods. Measures 1/4 inches in diameter with a 7/32-inch shank size and a twist length of 4 1/2 inches for an overall length of 7 1/2 inches. Fits an I-100 power drill.

This full-length heat treated bit has a coarse screw point with a single-spur cutting edge for smooth, clean holes drilled into hard and soft woods. Measures 1/4 inches in diameter with a 7/32-inch shank size and a twist length of 4 1/2 inches for an overall length of 7 1/2 inches. Fits an I-100 power drill.

Made for deep drilling jobs, this ship auger bit has a welded, durable cutting edge to extend its nail cutting life. This boring bit is 17 inches long, 5/8 inches in diameter and has a 7/16-inch quick change impact shank.

Made for deep drilling jobs, this ship auger bit has a welded, durable cutting edge to extend its nail cutting life. This boring bit is 17 inches long, 5/8 inches in diameter and has a 7/16-inch quick change impact shank.

For use with an 1-100 power drill, this auger bit is recommended for soft or hard wood drilling applications. Leave smooth, clean holes with its heat-treated, coarse screw point and single-spur cutting edge. This drill bit is 7 1/2 inches long with a diameter of 1 1/8 inches, a twist length of 4 1/2 inches, and a shank size of 7/16 inches.

For use with an 1-100 power drill, this auger bit is recommended for soft or hard wood drilling applications. Leave smooth, clean holes with its heat-treated, coarse screw point and single-spur cutting edge. This drill bit is 7 1/2 inches long with a diameter of 1 1/8 inches, a twist length of 4 1/2 inches, and a shank size of 7/16 inches.

Compatible with an 1-100 power drill, this auger bit is ideal for wood drilling jobs. Leave smooth, clean holes with the heat-treated, coarse screw point and single-spur cutting edge. This drill bit is 7 1/2 inches long with a diameter of 13/16 inches, a twist length of 4 1/2 inches, and a shank size of 5/16 inches.

Compatible with an 1-100 power drill, this auger bit is ideal for wood drilling jobs. Leave smooth, clean holes with the heat-treated, coarse screw point and single-spur cutting edge. This drill bit is 7 1/2 inches long with a diameter of 13/16 inches, a twist length of 4 1/2 inches, and a shank size of 5/16 inches.

Cut smooth, clean holes through hard or soft woods using this auger bit, heat treated to guard against bending on heavy-duty jobs. This drill bit has a coarse screw point with a single-spur cutting edge and a solid centre. Measures 7/16 inches in diameter with a 7/32-inch shank size and a twist length of 4 1/2 inches for an overall length of 7 1/2 inches. Fits an I-100 power drill.

Cut smooth, clean holes through hard or soft woods using this auger bit, heat treated to guard against bending on heavy-duty jobs. This drill bit has a coarse screw point with a single-spur cutting edge and a solid centre. Measures 7/16 inches in diameter with a 7/32-inch shank size and a twist length of 4 1/2 inches for an overall length of 7 1/2 inches. Fits an I-100 power drill.

This wood drilling bit is made of carbon steel and has a ¼ inch diameter, 4 inch long shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a 4¾ inch length. Plus it has one straight flute, a hex shank, a neutral cutting direction, and a Blue-Groove drill point.

This wood drilling bit is made of carbon steel and has a ¼ inch diameter, 4 inch long shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a 4¾ inch length. Plus it has one straight flute, a hex shank, a neutral cutting direction, and a Blue-Groove drill point.

Steel, Dia. (In.) 1, Shank Size (In.) 1/4, Overall Length (In.) 4, For Standard Pipe Sz. (In.) No, For Use With Wood, Includes Bit

Steel, Dia. (In.) 1, Shank Size (In.) 1/4, Overall Length (In.) 4, For Standard Pipe Sz. (In.) No, For Use With Wood, Includes Bit

Steel, Dia. (In.) 5/8, Shank Size (In.) 1/4, Overall Length (In.) 4, For Standard Pipe Sz. (In.) No, For Use With Wood, Includes Bit

Steel, Dia. (In.) 5/8, Shank Size (In.) 1/4, Overall Length (In.) 4, For Standard Pipe Sz. (In.) No, For Use With Wood, Includes Bit

Make accurate, smooth, clean holes on your next woodworking project with this brad-point tip drill bit. Built with cutting edges to reduce splinters, this bit is ideal for cabinetry, doweling, or furniture making. Measures 1/2 inches in diameter with a 3/8-inch shank and twist length of 3 31/32 inches for an overall length of 5 15/16 inches.

Make accurate, smooth, clean holes on your next woodworking project with this brad-point tip drill bit. Built with cutting edges to reduce splinters, this bit is ideal for cabinetry, doweling, or furniture making. Measures 1/2 inches in diameter with a 3/8-inch shank and twist length of 3 31/32 inches for an overall length of 5 15/16 inches.

Steel, Dia. (In.) 7/8, Shank Size (In.) 1/4, Overall Length (In.) 4, For Standard Pipe Sz. (In.) No, For Use With Wood, Includes Bit

Steel, Dia. (In.) 7/8, Shank Size (In.) 1/4, Overall Length (In.) 4, For Standard Pipe Sz. (In.) No, For Use With Wood, Includes Bit

This wood drilling bit set is made of carbon steel and has a 4 inch long shank. It includes sizes ½ inch, ¾ inch, 1 inch, is designed for use with wood. This drill bit set has a bright (uncoated) finish, and has fractional inch measurements. It has a four-inch length. Plus it has a hex shank, and right hand cutting direction.

This wood drilling bit set is made of carbon steel and has a 4 inch long shank. It includes sizes ½ inch, ¾ inch, 1 inch, is designed for use with wood. This drill bit set has a bright (uncoated) finish, and has fractional inch measurements. It has a four-inch length. Plus it has a hex shank, and right hand cutting direction.

Use this carbide installer bit for drilling metals, cast iron, and abrasive materials. This straight shank drill bit is 18 inches long and 5/16 inches in diameter.

Use this carbide installer bit for drilling metals, cast iron, and abrasive materials. This straight shank drill bit is 18 inches long and 5/16 inches in diameter.

This wood drilling bit is made of carbon steel and has a ¼ inch diameter, 4 inch long shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a 4¾ inch length. Plus it has one straight flute, a hex shank, a neutral cutting direction, and a Blue-Groove drill point.

This wood drilling bit is made of carbon steel and has a ¼ inch diameter, 4 inch long shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a 4¾ inch length. Plus it has one straight flute, a hex shank, a neutral cutting direction, and a Blue-Groove drill point.