Product ITEM is unavailable. See products from the same category below.
Pry Bars
Pry bars use their body as a lever to shift, align, lift, and pull apart materials. Also known as crowbars, they have claw, chisel, or pointed tips on one or both ends that slide underneath, strike against, or press through parts and workpieces. Shorter bars provide more precise control but less leverage than longer bars. Typical applications for pry bars include opening crates and containers, demolishing flooring and roofing, removing trim and siding, and pulling nails.
This pry bar has a length of 16 inch, plus it weighs 0.93 pounds. The handle is black. It features 90 degrees angled chisel, rolling head. In addition, it has a black oxide finish, and is not tether ready.
This pry bar has a length of 16 inch, plus it weighs 0.93 pounds. The handle is black. It features 90 degrees angled chisel, rolling head. In addition, it has a black oxide finish, and is not tether ready.
This pry bar set has a length of 14 inch, 16 inch, 18 inch, 20 inch, plus it weighs 6.5 pounds. It features forged, heat treated, machined and meets the standards for ASME. This pry bar set includes four pieces, 14 inch line up pry bar, 16 inch rolling head pry bar, 20 inch line up pry bar, ⅞ inch x 18 and more.
This pry bar set has a length of 14 inch, 16 inch, 18 inch, 20 inch, plus it weighs 6.5 pounds. It features forged, heat treated, machined and meets the standards for ASME. This pry bar set includes four pieces, 14 inch line up pry bar, 16 inch rolling head pry bar, 20 inch line up pry bar, ⅞ inch x 18 and more.
This pry bar set has a length of 12 inch, 17¼ inch, 25 inch, plus it weighs 0.33 lb, 0.83 lb, 1.5 pounds. The acetate handle is black. It features curved blade tip provides extra leverage, ergonomic handle, heat-treated blade, used for prying and more and meets the standards for ASME. In addition, it has a black oxide finish. This pry bar set includes three pieces, 12 inch oal curved screwdriver pry bar, 17 inch oal curved screwdriver pry bar, 25 inch oal c and more.
This pry bar set has a length of 12 inch, 17¼ inch, 25 inch, plus it weighs 0.33 lb, 0.83 lb, 1.5 pounds. The acetate handle is black. It features curved blade tip provides extra leverage, ergonomic handle, heat-treated blade, used for prying and more and meets the standards for ASME. In addition, it has a black oxide finish. This pry bar set includes three pieces, 12 inch oal curved screwdriver pry bar, 17 inch oal curved screwdriver pry bar, 25 inch oal c and more.
This LINE-UP series pry bar has a length of 14 inch, plus it weighs 0.72 pounds. The handle is black. It features angled chisel end, long tapered end. In addition, it has a blast finish, and is not tether ready.
This LINE-UP series pry bar has a length of 14 inch, plus it weighs 0.72 pounds. The handle is black. It features angled chisel end, long tapered end. In addition, it has a blast finish, and is not tether ready.
This pinch point bar has a length of 14 inch, plus it weighs 0.72 pounds. The handle is grey. It features shot blasted finish and meets the standards for ANSI. In addition, it has a shot blasted finish, and is not tether ready.
This pinch point bar has a length of 14 inch, plus it weighs 0.72 pounds. The handle is grey. It features shot blasted finish and meets the standards for ANSI. In addition, it has a shot blasted finish, and is not tether ready.
This nail puller has a length of 10 inch, plus it weighs 1.05 pounds. The handle is grey. It features 90 degrees f head and meets the standards for ANSI. In addition, it has a powder coated finish, and is not tether ready.
This nail puller has a length of 10 inch, plus it weighs 1.05 pounds. The handle is grey. It features 90 degrees f head and meets the standards for ANSI. In addition, it has a powder coated finish, and is not tether ready.
This screwdriver handle pry bar has a length of 31 inch, plus it weighs 2 pounds. The acetate handle is red. It features rust protection, screwdriver style pry bars and meets the standards for ANSI. In addition, it has a black oxide finish, and is not tether ready.
This screwdriver handle pry bar has a length of 31 inch, plus it weighs 2 pounds. The acetate handle is red. It features rust protection, screwdriver style pry bars and meets the standards for ANSI. In addition, it has a black oxide finish, and is not tether ready.
This pinch point bar has a length of 16 inch, plus it weighs 1.21 pounds. The handle is grey. It features shot blasted finish and meets the standards for ANSI. In addition, it has a shot blasted finish, and is not tether ready.
This pinch point bar has a length of 16 inch, plus it weighs 1.21 pounds. The handle is grey. It features shot blasted finish and meets the standards for ANSI. In addition, it has a shot blasted finish, and is not tether ready.
This nail puller has a length of 15 inch, plus it weighs 1.4 pounds. The handle is grey. It features 90 degrees f head and meets the standards for ANSI. In addition, it has a powder coated finish, and is not tether ready.
This nail puller has a length of 15 inch, plus it weighs 1.4 pounds. The handle is grey. It features 90 degrees f head and meets the standards for ANSI. In addition, it has a powder coated finish, and is not tether ready.
This pry bar has a length of 22 inch, plus it weighs 2.75 pounds. It features 90 degrees angled chisel, rolling head and meets the standards for ASME. In addition, it has a black oxide finish, and is not tether ready.
This pry bar has a length of 22 inch, plus it weighs 2.75 pounds. It features 90 degrees angled chisel, rolling head and meets the standards for ASME. In addition, it has a black oxide finish, and is not tether ready.
This LINE-UP series pinch point bar has a length of 36 inch, plus it weighs 7 pounds. It features angled chisel end, long tapered end and meets the standards for ASME. In addition, it has a blast finish, and is not tether ready.
This LINE-UP series pinch point bar has a length of 36 inch, plus it weighs 7 pounds. It features angled chisel end, long tapered end and meets the standards for ASME. In addition, it has a blast finish, and is not tether ready.
This LINE-UP series pinch point bar has a length of 24 inch, plus it weighs 3.5 pounds. It features angled chisel end, long tapered end and meets the standards for ASME. In addition, it has a blast finish, and is not tether ready.
This LINE-UP series pinch point bar has a length of 24 inch, plus it weighs 3.5 pounds. It features angled chisel end, long tapered end and meets the standards for ASME. In addition, it has a blast finish, and is not tether ready.
This die separating bar has a diameter of ⅝ inch and a length of 30 inch, plus it weighs 2.95 pounds. The handle is black. It features curved end to help remove, pointed end to separate. In addition, it has a blast finish, and is not tether ready.
This die separating bar has a diameter of ⅝ inch and a length of 30 inch, plus it weighs 2.95 pounds. The handle is black. It features curved end to help remove, pointed end to separate. In addition, it has a blast finish, and is not tether ready.
This die separating bar has a diameter of ⅝ inch and a length of 18 inch, plus it weighs 1.92 pounds. The handle is black. It features curved end to help remove, pointed end to separate. In addition, it has a black oxide finish, and is not tether ready.
This die separating bar has a diameter of ⅝ inch and a length of 18 inch, plus it weighs 1.92 pounds. The handle is black. It features curved end to help remove, pointed end to separate. In addition, it has a black oxide finish, and is not tether ready.
This PRO LINE-UP series alignment pry bar has a length of 38 inch, plus it weighs 4.81 pounds. The handle is black. It features angled chisel end, tapered end. In addition, it has a black oxide finish, and is not tether ready.
This PRO LINE-UP series alignment pry bar has a length of 38 inch, plus it weighs 4.81 pounds. The handle is black. It features angled chisel end, tapered end. In addition, it has a black oxide finish, and is not tether ready.
This pry bar has a length of 9 inch, plus it weighs 0.92 pounds. It features 90 degrees angled chisel, rolling head and meets the standards for ASME. In addition, it has a black oxide finish, and is not tether ready.
This pry bar has a length of 9 inch, plus it weighs 0.92 pounds. It features 90 degrees angled chisel, rolling head and meets the standards for ASME. In addition, it has a black oxide finish, and is not tether ready.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
