Profile Router Bits

This straight router bit is made of carbide tipped. It has a 4⅛-inch overall length, ½-inch cutter diameter, ½-inch shank diameter, two-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 4⅛-inch overall length, ½-inch cutter diameter, ½-inch shank diameter, two-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2½-inch overall length, 5/16-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2½-inch overall length, 5/16-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has two-inch overall length, a 3/16-inch cutter diameter, a ¼-inch shank diameter, a ½-inch cut length, a maximum speed of 24000 RPM, and one flute. The straight bit cuts all composition materials, plywood, hardwood, and soft wood.

This straight bit is made of carbide tipped. It has two-inch overall length, a 3/16-inch cutter diameter, a ¼-inch shank diameter, a ½-inch cut length, a maximum speed of 24000 RPM, and one flute. The straight bit cuts all composition materials, plywood, hardwood, and soft wood.

This roman ogee bit is made of carbide. It has a ¼-inch radius, 2⅜-inch overall length, 1⅜-inch cutter diameter, ¼-inch shank diameter, 23/32-inch cut length, and a maximum speed of 16000 RPM. The roman ogee bit cuts all composition materials, plywood, hardwoods, and softwoods.

This roman ogee bit is made of carbide. It has a ¼-inch radius, 2⅜-inch overall length, 1⅜-inch cutter diameter, ¼-inch shank diameter, 23/32-inch cut length, and a maximum speed of 16000 RPM. The roman ogee bit cuts all composition materials, plywood, hardwoods, and softwoods.

This top bearing flush trim bit is made of carbide. It has a 2¼-inch overall length, ⅝-inch cutter diameter, ¼-inch shank diameter, 9/16-inch cut length, and a maximum speed of 24000 RPM. The trim bit cuts all composition materials, plywood, hardwood, and soft wood.

This top bearing flush trim bit is made of carbide. It has a 2¼-inch overall length, ⅝-inch cutter diameter, ¼-inch shank diameter, 9/16-inch cut length, and a maximum speed of 24000 RPM. The trim bit cuts all composition materials, plywood, hardwood, and soft wood.

This cove bit is made of carbide. It has a ¼-inch radius, ⅜-inch bearing diameter, 2 3/16-inch overall length, 7/8-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, one flute, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This cove bit is made of carbide. It has a ¼-inch radius, ⅜-inch bearing diameter, 2 3/16-inch overall length, 7/8-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, one flute, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This straight router bit is made of carbide tipped. It has a 2⅞-inch overall length, ¼-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2⅞-inch overall length, ¼-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 1¾-inch overall length, ⅛-inch cutter diameter, ¼-inch shank diameter, ⅜-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 1¾-inch overall length, ⅛-inch cutter diameter, ¼-inch shank diameter, ⅜-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This chamfer bit is made of carbide. It has a 2 3/16-inch overall length, 1¾-inch cutter diameter, ¼-inch shank diameter, ⅝-inch cut length, one flute, and a maximum speed of 16000 RPM. The 45 degree roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This chamfer bit is made of carbide. It has a 2 3/16-inch overall length, 1¾-inch cutter diameter, ¼-inch shank diameter, ⅝-inch cut length, one flute, and a maximum speed of 16000 RPM. The 45 degree roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rabbeting bit is made of carbide. It has a 2¼-inch overall length, 1⅜-inch cutter diameter, ½-inch shank diameter, ½-inch cut length, and a maximum speed of 16000 RPM. The bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rabbeting bit is made of carbide. It has a 2¼-inch overall length, 1⅜-inch cutter diameter, ½-inch shank diameter, ½-inch cut length, and a maximum speed of 16000 RPM. The bit cuts all composition materials, plywood, hardwoods, and softwoods.

This straight bit is made of carbide tipped. It has a three-inch overall length, 1¾-inch cutter diameter, ½-inch shank diameter, 1¼-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has a three-inch overall length, 1¾-inch cutter diameter, ½-inch shank diameter, 1¼-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This bearing flush trim bit is made of carbide. It has a ⅜-inch bearing diameter, 2 13/16-inch overall length, ⅜-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwood, and soft wood.

This bearing flush trim bit is made of carbide. It has a ⅜-inch bearing diameter, 2 13/16-inch overall length, ⅜-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwood, and soft wood.

This straight bit is made of carbide tipped. It has a 2 9/16-inch overall length, one-inch cutter diameter, a ¼-inch shank diameter, a 1⅛ inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has a 2 9/16-inch overall length, one-inch cutter diameter, a ¼-inch shank diameter, a 1⅛ inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This top bearing flush trim bit is made of carbide. It has a 2 13/16-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, one-inch cut length, and a maximum speed of 24000 RPM. The trim bit cuts all composition materials, plywood, hardwood, and soft wood.

This top bearing flush trim bit is made of carbide. It has a 2 13/16-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, one-inch cut length, and a maximum speed of 24000 RPM. The trim bit cuts all composition materials, plywood, hardwood, and soft wood.

This straight bit is made of carbide tipped. It has two-inch overall length, a 9/32-inch cutter diameter, a ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has two-inch overall length, a 9/32-inch cutter diameter, a ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.