Profile Router Bits

This roman ogee bit is made of carbide. It has a ¼-inch radius, 2⅜-inch overall length, 1⅜-inch cutter diameter, ¼-inch shank diameter, 23/32-inch cut length, and a maximum speed of 16000 RPM. The roman ogee bit cuts all composition materials, plywood, hardwoods, and softwoods.

This roman ogee bit is made of carbide. It has a ¼-inch radius, 2⅜-inch overall length, 1⅜-inch cutter diameter, ¼-inch shank diameter, 23/32-inch cut length, and a maximum speed of 16000 RPM. The roman ogee bit cuts all composition materials, plywood, hardwoods, and softwoods.

This top bearing flush trim bit is made of carbide. It has a 2¼-inch overall length, ⅝-inch cutter diameter, ¼-inch shank diameter, 9/16-inch cut length, and a maximum speed of 24000 RPM. The trim bit cuts all composition materials, plywood, hardwood, and soft wood.

This top bearing flush trim bit is made of carbide. It has a 2¼-inch overall length, ⅝-inch cutter diameter, ¼-inch shank diameter, 9/16-inch cut length, and a maximum speed of 24000 RPM. The trim bit cuts all composition materials, plywood, hardwood, and soft wood.

This rabbeting bit is made of carbide. It has a 2¼-inch overall length, 1⅜-inch cutter diameter, ½-inch shank diameter, ½-inch cut length, and a maximum speed of 16000 RPM. The bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rabbeting bit is made of carbide. It has a 2¼-inch overall length, 1⅜-inch cutter diameter, ½-inch shank diameter, ½-inch cut length, and a maximum speed of 16000 RPM. The bit cuts all composition materials, plywood, hardwoods, and softwoods.

This chamfer bit is made of carbide. It has a 2 3/16-inch overall length, 1¾-inch cutter diameter, ¼-inch shank diameter, ⅝-inch cut length, one flute, and a maximum speed of 16000 RPM. The 45 degree roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This chamfer bit is made of carbide. It has a 2 3/16-inch overall length, 1¾-inch cutter diameter, ¼-inch shank diameter, ⅝-inch cut length, one flute, and a maximum speed of 16000 RPM. The 45 degree roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This dovetail bit is made of carbide. It has a 2 5/32-inch overall length, ½-inch cutter diameter, ¼-inch shank diameter, 13/32-inch cut length, and a maximum speed of 24000 RPM. The eight degree bit cuts all composition materials, plywood, hardwood, and softwood.

This dovetail bit is made of carbide. It has a 2 5/32-inch overall length, ½-inch cutter diameter, ¼-inch shank diameter, 13/32-inch cut length, and a maximum speed of 24000 RPM. The eight degree bit cuts all composition materials, plywood, hardwood, and softwood.

This straight router bit is made of carbide tipped. It has a 2½-inch overall length, ⅜-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2½-inch overall length, ⅜-inch cutter diameter, ¼-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2⅛-inch overall length, ⅝-inch cutter diameter, ¼-inch shank diameter, ¾-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2⅛-inch overall length, ⅝-inch cutter diameter, ¼-inch shank diameter, ¾-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has a 3½-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, two-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has a 3½-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, two-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a three-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, 1½-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a three-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, 1½-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This roman ogee-cut profile router bit has a carbide tip. It has a 1 11/16-inch shank length, ½-inch shank diameter, 1½-inch cutting diameter, ¼-inch radius, and 2⅞-inch overall length. The bit has two flutes of ¾-inch and is suitable for roughing/finishing the end mill.

This roman ogee-cut profile router bit has a carbide tip. It has a 1 11/16-inch shank length, ½-inch shank diameter, 1½-inch cutting diameter, ¼-inch radius, and 2⅞-inch overall length. The bit has two flutes of ¾-inch and is suitable for roughing/finishing the end mill.

This flush trim-cut profile router bit has a carbide tip. It has a 1 5/16-inch shank length, ¼-inch shank diameter, ¼-inch cutting diameter, and 2⅝-inch overall length. The bit has two flutes of one-inch and is suitable for roughing/finishing the end mill.

This flush trim-cut profile router bit has a carbide tip. It has a 1 5/16-inch shank length, ¼-inch shank diameter, ¼-inch cutting diameter, and 2⅝-inch overall length. The bit has two flutes of one-inch and is suitable for roughing/finishing the end mill.

This V-groove bit is made of carbide tipped. It has a 1¾-inch overall length, ½-inch cutter diameter, ¼-inch shank diameter, 7/6-inch cut length, and a maximum speed of 24000 RPM. The 90 degree bit cuts all composition materials, routs plastics, plywood, hardwood, and softwood.

This V-groove bit is made of carbide tipped. It has a 1¾-inch overall length, ½-inch cutter diameter, ¼-inch shank diameter, 7/6-inch cut length, and a maximum speed of 24000 RPM. The 90 degree bit cuts all composition materials, routs plastics, plywood, hardwood, and softwood.

This rounding over bit is made of carbide. It has a 3/16-inch radius, 2 3/16-inch overall length, 7/8-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, two flutes, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rounding over bit is made of carbide. It has a 3/16-inch radius, 2 3/16-inch overall length, 7/8-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, two flutes, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This flush trim-cut profile router bit has a carbide tip. It has one-inch shank length, ¼-inch shank diameter, one-inch flute, ¼-inch cutting length, and 1 9/16-inch overall length. The bit has roughing/finishing end mill and is for use with trimming high-pressure plastic laminates flush with the edge band or substrate.

This flush trim-cut profile router bit has a carbide tip. It has one-inch shank length, ¼-inch shank diameter, one-inch flute, ¼-inch cutting length, and 1 9/16-inch overall length. The bit has roughing/finishing end mill and is for use with trimming high-pressure plastic laminates flush with the edge band or substrate.

This V-groove bit is made of carbide tipped. It has a 1¾-inch overall length, ⅜-inch cutter diameter, ¼-inch shank diameter, 5/16-inch cut length, and a maximum speed of 24000 RPM. The 90 degree bit cuts all composition materials, routs plastics, plywood, hardwood, and softwood.

This V-groove bit is made of carbide tipped. It has a 1¾-inch overall length, ⅜-inch cutter diameter, ¼-inch shank diameter, 5/16-inch cut length, and a maximum speed of 24000 RPM. The 90 degree bit cuts all composition materials, routs plastics, plywood, hardwood, and softwood.