Includes Spanner BushingIndicates whether a wheel has a spanner bushing that provides a smooth inner raceway for wheel bearings and prevents the wheel from rubbing against the caster frame.
Non-markingNon-marking indicates that the wheel is made from a material that will not scuff and leave marks on the surface it is rolling on. This does not indicate whether the wheel will damage the surface it is rolling on.
StandardStandard tread allows more surface area of the tread to make contact with the floor surface than other styles of wheel tread, which allows the wheel to have a higher load capacity than wheels with a more rounded tread.
Wheel DiameterDiameter is the distance through the centre of the wheel from one edge to the other. Wheels with a smaller diameter are suitable for indoor applications, while larger diameter wheels are suitable for outdoor terrain.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Plastic & Phenolic Tread Standard Wheels
These wheels have plastic or phenolic treads that resist corrosion. The wheels' hard treads provide smooth rolling and good maneuverability and are less damaging to floors than wheels with metal treads. Plastic and phenolic tread wheels are used on carts, racks, and similar equipment in a range of institutional and industrial applications.
If you're dealing with excessive load weights and floor protection is not a factor, this wheel is a great choice. The cast iron and forged steel are suitable for high capacity, abusive applications, and the phenolic material gives resistance to oil, gasoline, and even dilute acids. The wheel has a 6-inch diameter, 3-inch width, and a 2500 lb capacity.
If you're dealing with excessive load weights and floor protection is not a factor, this wheel is a great choice. The cast iron and forged steel are suitable for high capacity, abusive applications, and the phenolic material gives resistance to oil, gasoline, and even dilute acids. The wheel has a 6-inch diameter, 3-inch width, and a 2500 lb capacity.
This wheel is great when excessive load weights are involved, and floor protection is not a factor. The cast iron and forged steel are suitable for high capacity, abusive applications, and the phenolic material gives resistance to oil, gasoline, and even dilute acids. The wheel has a 6-inch diameter, 3-inch width, and a 3000 lb capacity.
This wheel is great when excessive load weights are involved, and floor protection is not a factor. The cast iron and forged steel are suitable for high capacity, abusive applications, and the phenolic material gives resistance to oil, gasoline, and even dilute acids. The wheel has a 6-inch diameter, 3-inch width, and a 3000 lb capacity.
This swivel wheel has a zinc-covered steel top plate and phenolic wheel with a 5-inch diameter and 2-inch width. It is good for medium to heavy-duty uses with a 900 lb capacity, and it gives a smooth roll over a variety of surfaces. It has been heat-treated for added strength and has a mounting height of 6.5 inches.
This swivel wheel has a zinc-covered steel top plate and phenolic wheel with a 5-inch diameter and 2-inch width. It is good for medium to heavy-duty uses with a 900 lb capacity, and it gives a smooth roll over a variety of surfaces. It has been heat-treated for added strength and has a mounting height of 6.5 inches.
This 500 lb capacity offset pneumatic black wheel has a 2 1/4 inch width, an 8-inch diameter, a 3/4 inch bore, and a ball bearing. It is Duraflex granular rubber over polypropylene which has been cured under tremendous pressure. The durometer rating is 80A, and the wheel is both puncture-proof and impact-resistant.
This 500 lb capacity offset pneumatic black wheel has a 2 1/4 inch width, an 8-inch diameter, a 3/4 inch bore, and a ball bearing. It is Duraflex granular rubber over polypropylene which has been cured under tremendous pressure. The durometer rating is 80A, and the wheel is both puncture-proof and impact-resistant.
This 500 lb capacity centred pneumatic black wheel has a 2 1/4 inch width, an 8-inch diameter, a 5/8 inch bore, and a ball bearing. It is puncture-proof and resistant to high impacts, with a durometer rating of 80A. The Duraflex granular rubber is moulded over polypropylene which has been cured under tremendous pressure, making it strong and long-lasting.
This 500 lb capacity centred pneumatic black wheel has a 2 1/4 inch width, an 8-inch diameter, a 5/8 inch bore, and a ball bearing. It is puncture-proof and resistant to high impacts, with a durometer rating of 80A. The Duraflex granular rubber is moulded over polypropylene which has been cured under tremendous pressure, making it strong and long-lasting.
A centred pneumatic black 3-inch width x 12-inch diameter wheel, with a 5/8 inch bore and ball bearing. The Duraflex solid cushion tire is a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under pressure. The load rating is 600 lbs, it is puncture-proof and impact-resistant, and the durometer rating is 80A.
A centred pneumatic black 3-inch width x 12-inch diameter wheel, with a 5/8 inch bore and ball bearing. The Duraflex solid cushion tire is a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under pressure. The load rating is 600 lbs, it is puncture-proof and impact-resistant, and the durometer rating is 80A.
A 550 lb capacity 2 1/2 inch width x 10-inch diameter offset pneumatic black wheel with a 3/4 inch bore and ball bearing. The Duraflex solid cushion tire is made from a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under pressure. It is impact-resistant and puncture-proof, with a durometer rating of 80A.
A 550 lb capacity 2 1/2 inch width x 10-inch diameter offset pneumatic black wheel with a 3/4 inch bore and ball bearing. The Duraflex solid cushion tire is made from a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under pressure. It is impact-resistant and puncture-proof, with a durometer rating of 80A.
This offset pneumatic black wheel with a 500 lb load rating has a 2 1/4 inch width, an 8-inch diameter, a 5/8 inch bore, and a ball bearing. It is Duraflex granular rubber over polypropylene which has been cured under tremendous pressure. The durometer rating is 80A, and the wheel is both puncture-proof and impact-resistant.
This offset pneumatic black wheel with a 500 lb load rating has a 2 1/4 inch width, an 8-inch diameter, a 5/8 inch bore, and a ball bearing. It is Duraflex granular rubber over polypropylene which has been cured under tremendous pressure. The durometer rating is 80A, and the wheel is both puncture-proof and impact-resistant.
This 550 lb capacity 2 1/2 inch width x 10-inch diameter offset pneumatic black wheel features a 5/8 inch bore, ball bearing, and a durometer rating of 80A. The Duraflex solid cushion tire is a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under extreme pressure. It is impact-resistant and puncture-proof.
This 550 lb capacity 2 1/2 inch width x 10-inch diameter offset pneumatic black wheel features a 5/8 inch bore, ball bearing, and a durometer rating of 80A. The Duraflex solid cushion tire is a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under extreme pressure. It is impact-resistant and puncture-proof.
This wheel with a 5-inch diameter and two-inch width is a sturdy and reliable replacement part for many general use applications. Though it does not have a bearing, it does offer a smooth and easy ride when fitted.
This wheel with a 5-inch diameter and two-inch width is a sturdy and reliable replacement part for many general use applications. Though it does not have a bearing, it does offer a smooth and easy ride when fitted.
This swivel caster with a threaded stem has a two-inch thermoplastic rubber wheel to resist chemicals, high temperatures, and wear. It has a load rating of 125 lbs, making it perfect for lighter uses where a smaller wheel is required. It is strong, durable, and makes for a soft and smooth roll.
This swivel caster with a threaded stem has a two-inch thermoplastic rubber wheel to resist chemicals, high temperatures, and wear. It has a load rating of 125 lbs, making it perfect for lighter uses where a smaller wheel is required. It is strong, durable, and makes for a soft and smooth roll.
This versatile rigid caster is ideal for most general medium- to heavy-duty industrial applications. The top plate is made from 1/4" thick carbon steel and heat-treated for added strength. The legs are formed of steel and welded to the plate. Zinc plating provides a corrosion-resistant finish, and the wheel is polyurethane. It has a 900 lb capacity.
This versatile rigid caster is ideal for most general medium- to heavy-duty industrial applications. The top plate is made from 1/4" thick carbon steel and heat-treated for added strength. The legs are formed of steel and welded to the plate. Zinc plating provides a corrosion-resistant finish, and the wheel is polyurethane. It has a 900 lb capacity.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
