Oxy-Fuel Torch Kits

This standard commando tip drill kit contains 12 high carbon steel drills in assorted popular sizes that range from 49 to 75, and a single and end chuck. There is room for many more drills in the case if needed.

This standard commando tip drill kit contains 12 high carbon steel drills in assorted popular sizes that range from 49 to 75, and a single and end chuck. There is room for many more drills in the case if needed.

This Medalist 350 Classic cutting welding outfit includes built-in check valves and flashback arrestors. In addition, it is designed for applications including industrial and general fabrication, light fabrication, repair and maintenance, structural steel fabrication. It meets the standards for UL listed.

This Medalist 350 Classic cutting welding outfit includes built-in check valves and flashback arrestors. In addition, it is designed for applications including industrial and general fabrication, light fabrication, repair and maintenance, structural steel fabrication. It meets the standards for UL listed.

This gas welding outfit includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. The 90-degree outfit cuts up to six inches and welds up to 1/4 inches. This product requires the use of propylene and propane and has a CA1350 cutting attachment.

This gas welding outfit includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. The 90-degree outfit cuts up to six inches and welds up to 1/4 inches. This product requires the use of propylene and propane and has a CA1350 cutting attachment.

This 90-degree outfit torch kit includes a welding handle, cutting attachment, cutting tip, welding tip, oxygen regulator, acetylene regulator, flashback arrestors, and black plastic toolbox. Designed for use with oxygen, this product cuts up to 3/4 inches and welds up to 3/32 inches. It also includes a 780A cutting attachment.

This 90-degree outfit torch kit includes a welding handle, cutting attachment, cutting tip, welding tip, oxygen regulator, acetylene regulator, flashback arrestors, and black plastic toolbox. Designed for use with oxygen, this product cuts up to 3/4 inches and welds up to 3/32 inches. It also includes a 780A cutting attachment.

Ameriflame(R) Hot Stuff(TM) cutting & welding outfit. Includes: regulators, cutting attachment, welding torch, cutting and welding tips, oxy/fuel hose set, check valves, flashback arrestors, welding goggles, flint lighter, tip saver set and instructions.

Ameriflame(R) Hot Stuff(TM) cutting & welding outfit. Includes: regulators, cutting attachment, welding torch, cutting and welding tips, oxy/fuel hose set, check valves, flashback arrestors, welding goggles, flint lighter, tip saver set and instructions.

This welding and cutting outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a spark lighter, goggles, Wypo Set, Grade T dual hose, acetylene regulator, oxygen regulator, cutting tip, and four heating nozzles. This product cuts up to 3/4 inches and welds up to 1/2 inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This welding and cutting outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a spark lighter, goggles, Wypo Set, Grade T dual hose, acetylene regulator, oxygen regulator, cutting tip, and four heating nozzles. This product cuts up to 3/4 inches and welds up to 1/2 inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

Bottom mount, brass, 2 inch, PSI/kPa, 1/4 inch NPT, 3000 PSI, UL listed pressure calibration, replacement gauge and lens for use with non-corrosive gas, for stem mounting, with compressed gas regulators.

Bottom mount, brass, 2 inch, PSI/kPa, 1/4 inch NPT, 3000 PSI, UL listed pressure calibration, replacement gauge and lens for use with non-corrosive gas, for stem mounting, with compressed gas regulators.

This medium-duty gas welding outfit has built-in reverse flow check valves. It has an RM grade hose for acetylene use, (T-grade hose for alternate fuel), and lighter and soft sided goggles. This product cuts up to 1/2 inches (12 millimetres) and welds up to 5/64 inches (1.9 millimetres).

This medium-duty gas welding outfit has built-in reverse flow check valves. It has an RM grade hose for acetylene use, (T-grade hose for alternate fuel), and lighter and soft sided goggles. This product cuts up to 1/2 inches (12 millimetres) and welds up to 5/64 inches (1.9 millimetres).

This gas welding outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. This product cuts up to eight inches and welds up to three inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This gas welding outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. This product cuts up to eight inches and welds up to three inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This Tag-A-Long outfit with tanks includes check valves, cylinder carrier, and safety goggles. In addition, it is designed for applications including cutting, welding.

This Tag-A-Long outfit with tanks includes check valves, cylinder carrier, and safety goggles. In addition, it is designed for applications including cutting, welding.

Track for the VCM 200 Series portable cutting machine. Straight line cutting for a variety of welding operations. Torch not included.

Track for the VCM 200 Series portable cutting machine. Straight line cutting for a variety of welding operations. Torch not included.

Lightweight Centurion(R) outfits are extremely portable and excellent for brazing, welding, and cutting almost anywhere on the job site. These basic starter outfits are capable of brazing up to 1 in copper tubing and welding with acetylene up to 1/8 in steel.

Lightweight Centurion(R) outfits are extremely portable and excellent for brazing, welding, and cutting almost anywhere on the job site. These basic starter outfits are capable of brazing up to 1 in copper tubing and welding with acetylene up to 1/8 in steel.

This G150 gas welding outfit includes check valve, fuel regulator, goggles, handle, striker, tank key. In addition, it is designed for applications including cutting, heating, welding.

This G150 gas welding outfit includes check valve, fuel regulator, goggles, handle, striker, tank key. In addition, it is designed for applications including cutting, heating, welding.

Versatile kits come with tips to do most any job. Included are SC or MC cutting assemblies. Kits also include a heating tip, welding tip and three cutting tips. Capable of cutting from 3/8 inch to 2 inches.

Versatile kits come with tips to do most any job. Included are SC or MC cutting assemblies. Kits also include a heating tip, welding tip and three cutting tips. Capable of cutting from 3/8 inch to 2 inches.

Slip-in cutting tip design, no tools required. Nickel plated finish. Stainless steel ball style control valves for positive gas shut-off. 3 tube construction keeps mixed gases separated until reaching the tip. Ease-on cutting jet action reduces tip clogging and slag blowback. ETL listed.

Slip-in cutting tip design, no tools required. Nickel plated finish. Stainless steel ball style control valves for positive gas shut-off. 3 tube construction keeps mixed gases separated until reaching the tip. Ease-on cutting jet action reduces tip clogging and slag blowback. ETL listed.

This HBA S-30 heavy-duty toolbox outfit includes accessories and safety glasses, cutting tip, flashback arrestor pair, hose, oxygen and acetylene regulators, straight cutting torch. In addition, it is designed for applications including construction, fabrication. It meets the standards for ETL, UL.

This HBA S-30 heavy-duty toolbox outfit includes accessories and safety glasses, cutting tip, flashback arrestor pair, hose, oxygen and acetylene regulators, straight cutting torch. In addition, it is designed for applications including construction, fabrication. It meets the standards for ETL, UL.