These single-channel surface raceways are nonmetallic. They can install both indoors and outdoors and are suited for spaces that are out of reach or have low amounts of traffic, where they are unlikely to be disturbed. They're more lightweight than metallic raceways to facilitate installations. These raceways mount on walls and ceilings, and route wire and cable throughout an area. Wire and cable are laid into the raceways, keeping the conductors from being exposed and preventing kinks. They have a single channel, so they're ideal for simple installations where wire and cable don't need to be separated. These raceways are commonly installed in educational facilities, offices, and hospitals and are used with communication, power, and low-voltage data cable. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.
This PP1, PL1, PW2 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1 2/7 inch. It is for use with PolyTrak series raceways.
This PP1, PL1, PW2 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1 2/7 inch. It is for use with PolyTrak series raceways.
This PremiseTrak splice cover is made of PVC, and is off white. It features for right angle turns on same surface. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of one inch, width of 8/9 inch, and a height of ¾-inch. It is for use with PremiseTrak series raceways.
This PremiseTrak splice cover is made of PVC, and is off white. It features for right angle turns on same surface. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of one inch, width of 8/9 inch, and a height of ¾-inch. It is for use with PremiseTrak series raceways.
This PremiseTrak raceway is made of non-metallic, and is white. It includes base, cover. In addition, it meets the standards for UL 5A. It has length of five feet, width of 0.75 inches, and a height of 0.68 inch. It is for use with PremiseTrak series raceways, can be used outdoors. It also has adhesive mounting.
This PremiseTrak raceway is made of non-metallic, and is white. It includes base, cover. In addition, it meets the standards for UL 5A. It has length of five feet, width of 0.75 inches, and a height of 0.68 inch. It is for use with PremiseTrak series raceways, can be used outdoors. It also has adhesive mounting.
This PremiseTrak internal elbow fitting is made of non-metallic, and is off white. It features for inside surfaces at right angles. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PremiseTrak internal elbow fitting is made of non-metallic, and is off white. It features for inside surfaces at right angles. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PT1 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5.06 inch, width of 1.91 inch, and a height of 4.9 inch. It is for use with PolyTrak series raceways.
This PT1 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5.06 inch, width of 1.91 inch, and a height of 4.9 inch. It is for use with PolyTrak series raceways.
This PT1 lighting fixture box is made of PVC, and is off white. It features reduces inventory requirements, eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1.04 inch. It is for use with non-metallic PolyTrak series raceways.
This PT1 lighting fixture box is made of PVC, and is off white. It features reduces inventory requirements, eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1.04 inch. It is for use with non-metallic PolyTrak series raceways.
This PT1 conduit adapter is made of non-metallic, and is off white. It features for connecting conduit to raceway, use for ceiling feeds has combination½-inch, ¾-inch and one inch trade size kos. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A.
This PT1 conduit adapter is made of non-metallic, and is off white. It features for connecting conduit to raceway, use for ceiling feeds has combination½-inch, ¾-inch and one inch trade size kos. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A.
This PremiseTrak external elbow is made of non-metallic, and is off white. It features for outside surfaces at right angles. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PremiseTrak external elbow is made of non-metallic, and is off white. It features for outside surfaces at right angles. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PremiseTrak tee cover fitting is made of non-metallic, and is off white. It features for t-connection off premisetrak raceway. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PremiseTrak tee cover fitting is made of non-metallic, and is off white. It features for t-connection off premisetrak raceway. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PP1 flat elbow is made of non-metallic, and is off white. It features full capacity 1¼ inch bend radius flat elbow. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A.
This PP1 flat elbow is made of non-metallic, and is off white. It features full capacity 1¼ inch bend radius flat elbow. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A.
This PT1 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 3¼ inch, width of 1 5/8-inch, and a height of 4.9 inch. It is for use with PolyTrak series raceways.
This PT1 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 3¼ inch, width of 1 5/8-inch, and a height of 4.9 inch. It is for use with PolyTrak series raceways.
This PremiseTrak flat elbow fitting is made of PVC, and is off white. It features for right angle turns on same surface. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of 1 1/3 inches, width of ¾-inch, and a height of 1 1/3 inch. It is for use with PremiseTrak series raceways.
This PremiseTrak flat elbow fitting is made of PVC, and is off white. It features for right angle turns on same surface. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of 1 1/3 inches, width of ¾-inch, and a height of 1 1/3 inch. It is for use with PremiseTrak series raceways.
This PL1, PP1 end cap is made of non-metallic, and is off white. It features for closing end of raceway. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A.
This PL1, PP1 end cap is made of non-metallic, and is off white. It features for closing end of raceway. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A.
This PremiseTrak end cap is made of non-metallic, and is off white. It features for closing end of raceway. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PremiseTrak end cap is made of non-metallic, and is off white. It features for closing end of raceway. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
