These drill bits do not have coolant holes. If coolant is required for drilling, it must be fed from the machine to the bits' tip using a separate hose. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel, cobalt, or powdered-metal drill bits and require a rigid setup such as a fixed-spindle machine. The bits create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling. Jobber-length drill bits provide a good balance of strength and accuracy when drilling into a variety of materials.
This jobber length drill bit is made of cobalt and has a 7/32 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3¾ inch length. Plus it has 2 17/32 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 7/32 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3¾ inch length. Plus it has 2 17/32 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This drill bit has a 3/32 inch diameter shank. It is non-coolant through with a 2¼ inch length, plus it has 1 17/64 inch straight flutes, a right hand cutting direction, and a 118 Degrees drill point.
This drill bit has a 3/32 inch diameter shank. It is non-coolant through with a 2¼ inch length, plus it has 1 17/64 inch straight flutes, a right hand cutting direction, and a 118 Degrees drill point.
This drill bit has a 11/64 inch diameter shank. It is non-coolant through with a 3¼ inch length, plus it has 2 9/64 inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 11/64 inch diameter shank. It is non-coolant through with a 3¼ inch length, plus it has 2 9/64 inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 13/64 inch diameter, 1 5/27 inch long shank. It is non-coolant through with a 3⅝ inch length. Plus it has 2 1½5 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 13/64 inch diameter, 1 5/27 inch long shank. It is non-coolant through with a 3⅝ inch length. Plus it has 2 1½5 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3½ inch length. Plus it has 2 21/64 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3½ inch length. Plus it has 2 21/64 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This drill bit has a 15/64 inch diameter shank. It is non-coolant through with a 3⅞ inch length. Plus it has 2 7/11 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 15/64 inch diameter shank. It is non-coolant through with a 3⅞ inch length. Plus it has 2 7/11 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a 9/32 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 4¼ inch length. Plus it has 2 20/21 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 9/32 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 4¼ inch length. Plus it has 2 20/21 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This drill bit has a 19/64 inch diameter, 1 18/59 inch long shank. It is non-coolant through with a 4⅜ inch length. Plus it has 3¾3 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 19/64 inch diameter, 1 18/59 inch long shank. It is non-coolant through with a 4⅜ inch length. Plus it has 3¾3 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 25/64 inch diameter, 1 61/68 inch long shank. It is non-coolant through with a 5⅛ inch length. Plus it has 3 13/57 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 25/64 inch diameter, 1 61/68 inch long shank. It is non-coolant through with a 5⅛ inch length. Plus it has 3 13/57 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a 5/32 inch diameter, 1⅛ inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3⅛ inch length. Plus it has 2 inch straight flutes, right hand cutting direction, and a 135 Degrees split point.
This jobber length drill bit is made of cobalt and has a 5/32 inch diameter, 1⅛ inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3⅛ inch length. Plus it has 2 inch straight flutes, right hand cutting direction, and a 135 Degrees split point.
This drill bit has a 17/64 inch diameter, 1¼ inch long shank. It is non-coolant through with a 4⅛ inch length. Plus it has 2⅞ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 17/64 inch diameter, 1¼ inch long shank. It is non-coolant through with a 4⅛ inch length. Plus it has 2⅞ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a five-inch length. Plus it has 3 59/95 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a five-inch length. Plus it has 3 59/95 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 7/64 inch diameter, 1 11/86 inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 2⅝ inch length. Plus it has 1½ inch straight flutes, a right hand cutting direction, and a 118 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 7/64 inch diameter, 1 11/86 inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 2⅝ inch length. Plus it has 1½ inch straight flutes, a right hand cutting direction, and a 118 Degrees split point drill point.
This drill bit has a 9/64 inch diameter shank. It is non-coolant through with a 2⅞ inch length, plus it has 1 47/64 inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 9/64 inch diameter shank. It is non-coolant through with a 2⅞ inch length, plus it has 1 47/64 inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
