Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits

This jobber length drill bit has a 17/64 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has 3⅛ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 17/64 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has 3⅛ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 3/16 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 3½ inch length. Plus it has 2½ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 3/16 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 3½ inch length. Plus it has 2½ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 5/64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a two-inch length. Plus it has 1 inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 5/64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a two-inch length. Plus it has 1 inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 7.64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 2⅝ inch length. Plus it has 1⅝ inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 7.64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 2⅝ inch length. Plus it has 1⅝ inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit has a 5/32 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 3⅛ inch length. Plus it has 2⅛ inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 5/32 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 3⅛ inch length. Plus it has 2⅛ inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 9/32 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 4¼ inch length. Plus it has 3¼ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 9/32 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 4¼ inch length. Plus it has 3¼ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 5½ inch length. Plus it has 4½ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 5½ inch length. Plus it has 4½ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit has a ⅜ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has 4⅜ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ⅜ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has 4⅜ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ⅛ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 2¾ inch length. Plus it has 1¾ inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ⅛ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 2¾ inch length. Plus it has 1¾ inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 19/64 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 4⅜ inch length. Plus it has 3⅜ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 19/64 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 4⅜ inch length. Plus it has 3⅜ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 5¾ inch length. Plus it has 4¾ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 5¾ inch length. Plus it has 4¾ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit has a 13/64 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 3⅝ inch length. Plus it has 2⅝ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 13/64 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 3⅝ inch length. Plus it has 2⅝ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 11/32 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has 3¾ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 11/32 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has 3¾ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 1/16 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has ⅞ inch straight flutes, a right hand cutting direction, and a 118 Degrees drill point.

This jobber length drill bit has a 1/16 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has ⅞ inch straight flutes, a right hand cutting direction, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 13/64 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, composite, copper, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a 13/64 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, composite, copper, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a ¼ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a four-inch length. Plus it has 3 inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ¼ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a four-inch length. Plus it has 3 inch straight flutes, and a 135 Degrees drill point.