MIG Welding Wire

This ESAB OK Autrod 12.51 MIG wire (ER70S-6) is a copper-coated, solid steel wire that provides excellent tolerance to rust and mill scale because of higher levels of manganese and silicon. It is suitable for most carbon steel MIG welding applications and may be used with spray arc, pulsed arc, and short arc welding processes. It is precision-wound with a 0.035-inch diameter and tensile strength of 70,000 PSI, and meets CSA standards. Available in a box as an 18-kilogram spool.

This ESAB OK Autrod 12.51 MIG wire (ER70S-6) is a copper-coated, solid steel wire that provides excellent tolerance to rust and mill scale because of higher levels of manganese and silicon. It is suitable for most carbon steel MIG welding applications and may be used with spray arc, pulsed arc, and short arc welding processes. It is precision-wound with a 0.035-inch diameter and tensile strength of 70,000 PSI, and meets CSA standards. Available in a box as an 18-kilogram spool.

This ESAB Aristorod 12.50 non-copper coated steel MIG wire (ER70S-6) has excellent feedability, even at high wire feed speeds, and is ideal for robotic applications. It has lower spatter levels than copper-coated wires, higher productivity, and less post-weld cleanup. Its diameter is 0.035 inch with a tensile strength of 70,000 PSI. Available in a box as an 18-kilogram, precision-wound spool.

This ESAB Aristorod 12.50 non-copper coated steel MIG wire (ER70S-6) has excellent feedability, even at high wire feed speeds, and is ideal for robotic applications. It has lower spatter levels than copper-coated wires, higher productivity, and less post-weld cleanup. Its diameter is 0.035 inch with a tensile strength of 70,000 PSI. Available in a box as an 18-kilogram, precision-wound spool.

This Alloy 4043 MIG welding wire is made of aluminum. In addition, it is designed for use with the following materials: aluminum. It weighs one pound. It can be used for MIG, in positions including flat, horizontal, overhead, vertical-up and meets the standards for AWS A5.10.

This Alloy 4043 MIG welding wire is made of aluminum. In addition, it is designed for use with the following materials: aluminum. It weighs one pound. It can be used for MIG, in positions including flat, horizontal, overhead, vertical-up and meets the standards for AWS A5.10.

ESAB produces premium quality aluminum wire by incorporating technology through the entire wire drawing, spooling and testing process. Wire diameters are restricted to 1/10 of the AWS A5.10 diameter control specification range.

ESAB produces premium quality aluminum wire by incorporating technology through the entire wire drawing, spooling and testing process. Wire diameters are restricted to 1/10 of the AWS A5.10 diameter control specification range.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.035-inch diameter and meets CSA standards. Available in a 12-inch, 20-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.035-inch diameter and meets CSA standards. Available in a 12-inch, 20-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.030-inch diameter and meets CSA standards. Available in an eight-inch, five-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.030-inch diameter and meets CSA standards. Available in an eight-inch, five-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.035-inch diameter and meets CSA standards. Available in an eight-inch, five-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.035-inch diameter and meets CSA standards. Available in an eight-inch, five-kilogram spool.

This ESAB OK Autrod 12.51 MIG wire (ER70S-6) is a copper-coated, solid steel wire that provides excellent tolerance to rust and mill scale because of higher levels of manganese and silicon. It is suitable for most carbon steel MIG welding applications and may be used with spray arc, pulsed arc, and short arc welding processes. It is precision-wound with a 0.045-inch diameter and tensile strength of 70,000 PSI, and meets CSA standards. Available in a box as an 18-kilogram spool.

This ESAB OK Autrod 12.51 MIG wire (ER70S-6) is a copper-coated, solid steel wire that provides excellent tolerance to rust and mill scale because of higher levels of manganese and silicon. It is suitable for most carbon steel MIG welding applications and may be used with spray arc, pulsed arc, and short arc welding processes. It is precision-wound with a 0.045-inch diameter and tensile strength of 70,000 PSI, and meets CSA standards. Available in a box as an 18-kilogram spool.

This ESAB Aristorod 12.50 non-copper coated steel MIG wire (ER70S-6) has excellent feedability, even at high wire feed speeds, and is ideal for robotic applications. It has lower spatter levels than copper-coated wires, higher productivity, and less post-weld cleanup. Its diameter is 0.045 inch with a tensile strength of 70,000 PSI. Available in a box as an 18-kilogram, precision-wound spool.

This ESAB Aristorod 12.50 non-copper coated steel MIG wire (ER70S-6) has excellent feedability, even at high wire feed speeds, and is ideal for robotic applications. It has lower spatter levels than copper-coated wires, higher productivity, and less post-weld cleanup. Its diameter is 0.045 inch with a tensile strength of 70,000 PSI. Available in a box as an 18-kilogram, precision-wound spool.

This ESAB OK Autrod 4043 MIG welding wire is one of the most widely used welding and brazing alloys and is classed as a general-purpose filler. Made of aluminum with silicon additions, it results in improved fluidity, is not sensitive to weld cracking, and produces bright and almost smut-free welds. It is 0.030 inch in diameter and available in a 0.45-kilogram spool.

This ESAB OK Autrod 4043 MIG welding wire is one of the most widely used welding and brazing alloys and is classed as a general-purpose filler. Made of aluminum with silicon additions, it results in improved fluidity, is not sensitive to weld cracking, and produces bright and almost smut-free welds. It is 0.030 inch in diameter and available in a 0.45-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.023-inch diameter and meets CSA standards. Available in an eight-inch, five-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.023-inch diameter and meets CSA standards. Available in an eight-inch, five-kilogram spool.

This ESAB OK Autrod 5356 MIG welding wire is one of the most widely used welding alloys and is classed as a general-purpose filler with a relatively high shear strength. It is 0.035 inch in diameter and available in a 0.45-kilogram spool.

This ESAB OK Autrod 5356 MIG welding wire is one of the most widely used welding alloys and is classed as a general-purpose filler with a relatively high shear strength. It is 0.035 inch in diameter and available in a 0.45-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.030-inch diameter and meets CSA standards. Available in a four-inch, 0.9-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.030-inch diameter and meets CSA standards. Available in a four-inch, 0.9-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.035-inch diameter and meets CSA standards. Available in a four-inch, one-kilogram spool.

This Blueshield LA S-6 MIG wire (ER70S-6) is a lightly copper-coated solid wire that welds all-positions: vertical, up and down, and overhead using short-circuit or pulsed spray arc transfer. It is excellent for welding low-carbon steel plates, tubing, piping, structural members, steel casings, pressure vessels, etc. It is random-wound with a 0.035-inch diameter and meets CSA standards. Available in a four-inch, one-kilogram spool.

This Alloy 5356 MIG welding wire is made of aluminum. In addition, it is designed for use with the following materials: aluminum to aluminum. It weighs one pound. It can be used for MIG, in positions including flat, horizontal, overhead, vertical-up and meets the standards for AWS A5.10.

This Alloy 5356 MIG welding wire is made of aluminum. In addition, it is designed for use with the following materials: aluminum to aluminum. It weighs one pound. It can be used for MIG, in positions including flat, horizontal, overhead, vertical-up and meets the standards for AWS A5.10.

This OK Aristorod 121/20 MIG welding wire is made of carbon steel. In addition, it is designed for use with the following materials: carbon steel to carbon steel. It weighs 11 pounds. It can be used for MIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.18.

This OK Aristorod 121/20 MIG welding wire is made of carbon steel. In addition, it is designed for use with the following materials: carbon steel to carbon steel. It weighs 11 pounds. It can be used for MIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.18.