Heat shrink and cold shrink tubing are sleeves that form a tight seal around wire, cable, and connectors and are used for protection, insulation, and repairs. Heat shrink tubing requires an oven, hot air gun, or blowtorch to shrink and seal it. All purpose heat shrink tubing can be used across a wide variety of applications. Adhesive-lined heat shrink tubing has an adhesive core that melts when heated to create a moisture-resistant barrier. Heat shrink and cold shrink tubing assortment kits include different sizes or colours of tubing or multiple tubes in the same size. Heat shrink end caps are placed over cable ends, while heat shrink breakout boots are placed over the point where wire splits off from cable. Cold shrink tubing shrinks when an inner core is pulled from one end after the sleeve has been positioned over the bundle. It does not require heat or tools for installation.
1/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
1/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
3/8 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
3/8 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
3/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag.
3/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag.
1/2 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
1/2 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL listed, File E-39100, SAE AS23053/5, Class 1 (all colours), Class 2 (clear), CSA certified, and RoHS 2011/65/EU compliant. It has length of 100 feet. It is also flame retardant, with a 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL listed, File E-39100, SAE AS23053/5, Class 1 (all colours), Class 2 (clear), CSA certified, and RoHS 2011/65/EU compliant. It has length of 100 feet. It is also flame retardant, with a 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This bag of 10 pieces of thin, black, FP-301 heat shrink tubing are all 1/4-inch by six inches in length and made of polyolefin that is split resistant, mechanically tough and resists cold flow. It is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It's dielectric stregth rating is up to 900 volts.
This bag of 10 pieces of thin, black, FP-301 heat shrink tubing are all 1/4-inch by six inches in length and made of polyolefin that is split resistant, mechanically tough and resists cold flow. It is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It's dielectric stregth rating is up to 900 volts.
#1 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
#1 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
This heat shrink tubing kit is made of cross-linked polyolefin, and is black. It includes 20¼ inches, 32 3/16 in, four 1 in, four¾-inch, six½-inch, eight⅜ inch, plastic storage case. It has length of six inches.
This heat shrink tubing kit is made of cross-linked polyolefin, and is black. It includes 20¼ inches, 32 3/16 in, four 1 in, four¾-inch, six½-inch, eight⅜ inch, plastic storage case. It has length of six inches.
This is a bag of ten black FP-301 heat shrink tubing pieces measuring 3/8-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and it's operational at minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. Its dielectric strength rating is up to 900 volts.
This is a bag of ten black FP-301 heat shrink tubing pieces measuring 3/8-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and it's operational at minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. Its dielectric strength rating is up to 900 volts.
Black 3/4 inch diameter by four foot length of thin walled FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Black 3/4 inch diameter by four foot length of thin walled FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Clear 3/8 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Clear 3/8 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
This flame-retardant heat shrink tubing kit features a 2:1 shrink ratio and offers insulation for 600 V-rated applications. It includes 133 pieces of black, red, white, yellow, blue, green, and clear tubing. The tubing is six inches long and has a flexible polyolefin construction with an internal layer of thermoplastic adhesive to provide moisture-seal protection and abrasion-resistance. This kit comes in a 11 x 2 1/2 x 7-inch plastic box with product and installation information on the cover.
This flame-retardant heat shrink tubing kit features a 2:1 shrink ratio and offers insulation for 600 V-rated applications. It includes 133 pieces of black, red, white, yellow, blue, green, and clear tubing. The tubing is six inches long and has a flexible polyolefin construction with an internal layer of thermoplastic adhesive to provide moisture-seal protection and abrasion-resistance. This kit comes in a 11 x 2 1/2 x 7-inch plastic box with product and installation information on the cover.
This FP-301 thin walled heat shrink tubing is made of flexible polyolefin that is split resistant, mechanically tough, and resists cold flow. It is rated for continuous operation from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It comes in a bag of ten pieces that are a half inch in diameter and six inches in length. And its dialectric strength is rated to 900 volts.
This FP-301 thin walled heat shrink tubing is made of flexible polyolefin that is split resistant, mechanically tough, and resists cold flow. It is rated for continuous operation from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It comes in a bag of ten pieces that are a half inch in diameter and six inches in length. And its dialectric strength is rated to 900 volts.
Clear 3/4 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Clear 3/4 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
This split resistant, black, FP-301 heat shrink tubing comes in a bag of ten pieces, all 3/4-inch in diameter by six inches in length that are made of polyolefin that is mechanically tough and resists cold flow. The pieces have a shrink ratio of 2:1 and is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And it has a dielectric stregth rating up to 900 volts.
This split resistant, black, FP-301 heat shrink tubing comes in a bag of ten pieces, all 3/4-inch in diameter by six inches in length that are made of polyolefin that is mechanically tough and resists cold flow. The pieces have a shrink ratio of 2:1 and is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And it has a dielectric stregth rating up to 900 volts.
This is a bag of split resistant, black, FP-301 heat shrink tubing that comes in with ten pieces measuring 3/16-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and has an operational temperature range from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And its dielectric strength rating is up to 900 volts.
This is a bag of split resistant, black, FP-301 heat shrink tubing that comes in with ten pieces measuring 3/16-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and has an operational temperature range from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And its dielectric strength rating is up to 900 volts.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.