Hardfacing Flux-Cored Wire

This Hobart FabCo Excel-Arc 71 gas-shielded, flux-cored welding wire is all-position with low fume emissions, and is designed to be used with carbon dioxide or argon/carbon dioxide mixed gas with easy slag removal and a low hydrogen weld deposit. It is made of mild steel with a tensile strength of 670 MPa, and a diameter of 0.045 inch. Meets CSA/CWB W48-01 standards. Available in a 15-pound spool.

This Hobart FabCo Excel-Arc 71 gas-shielded, flux-cored welding wire is all-position with low fume emissions, and is designed to be used with carbon dioxide or argon/carbon dioxide mixed gas with easy slag removal and a low hydrogen weld deposit. It is made of mild steel with a tensile strength of 670 MPa, and a diameter of 0.045 inch. Meets CSA/CWB W48-01 standards. Available in a 15-pound spool.

Dual Shield(R) 7100 Ultra is an all position wire with a uniquely balanced chemistry to provide greater deposition and improved welding productivity. This product has a wider range of operating parameters and produces lower welding fume than other E71T-1/T-9 flux cored wires.

Dual Shield(R) 7100 Ultra is an all position wire with a uniquely balanced chemistry to provide greater deposition and improved welding productivity. This product has a wider range of operating parameters and produces lower welding fume than other E71T-1/T-9 flux cored wires.

Coreshield(R) 15 is an all-position self-shielded flux cored welding wire for single pass applications. The use of DCEN (electrode negative) minimizes the risk of burn through. Excellent for lap and fillet welds on galvanized and mild steels in all weldin

Coreshield(R) 15 is an all-position self-shielded flux cored welding wire for single pass applications. The use of DCEN (electrode negative) minimizes the risk of burn through. Excellent for lap and fillet welds on galvanized and mild steels in all weldin

Coreshield(R) 15 is an all-position self-shielded flux cored welding wire for single pass applications. The use of DCEN (electrode negative) minimizes the risk of burn through. Excellent for lap and fillet welds on galvanized and mild steels in all weldin

Coreshield(R) 15 is an all-position self-shielded flux cored welding wire for single pass applications. The use of DCEN (electrode negative) minimizes the risk of burn through. Excellent for lap and fillet welds on galvanized and mild steels in all weldin

EA 71 is an especially smooth, all-position, gas shielded flux-corded wire with low fume emissions. Designed to be used with CO2 or 75 % Ar/25 % CO2 mixed gas with easy slag removal and a low hydrogen weld deposit.

EA 71 is an especially smooth, all-position, gas shielded flux-corded wire with low fume emissions. Designed to be used with CO2 or 75 % Ar/25 % CO2 mixed gas with easy slag removal and a low hydrogen weld deposit.

This Stoody 965 welding wire is a general-purpose, hard-facing alloy made of martensitic tool steel suitable for moderate to severe impact and abrasion in metal-to-metal and metal-to-earth applications including drag chain latches and keepers, tillage tools, drag line bucket lips, tamper feet, chisel plows, dredge parts, extruder screws, and muller tires. It has a 0.045-inch diameter and is available in a 10-pound plastic spool.

This Stoody 965 welding wire is a general-purpose, hard-facing alloy made of martensitic tool steel suitable for moderate to severe impact and abrasion in metal-to-metal and metal-to-earth applications including drag chain latches and keepers, tillage tools, drag line bucket lips, tamper feet, chisel plows, dredge parts, extruder screws, and muller tires. It has a 0.045-inch diameter and is available in a 10-pound plastic spool.

This Stoody 965-G welding wire is a general-purpose, hard-facing alloy made of martensitic tool steel suitable for moderate to severe impact and abrasion in metal-to-metal and metal-to-earth applications including drag chain latches and keepers, tillage tools, drag line bucket lips, tamper feet, chisel plows, dredge parts, extruder screws, and muller tires. It has a 0.045-inch diameter and is available as a 33-pound spool in a wire basket.

This Stoody 965-G welding wire is a general-purpose, hard-facing alloy made of martensitic tool steel suitable for moderate to severe impact and abrasion in metal-to-metal and metal-to-earth applications including drag chain latches and keepers, tillage tools, drag line bucket lips, tamper feet, chisel plows, dredge parts, extruder screws, and muller tires. It has a 0.045-inch diameter and is available as a 33-pound spool in a wire basket.

This Hobart FabCOR 86R welding wire is a gas-shielded, metal-cored wire that has the high deposition rates of flux-cored wires and efficiency of solid wire. It is designed for single or multiple pass welding with exceptional low spatter and fume levels due to the spray arc transfer of the wire. It is made of mild steel with a tensile strength of 586 MPa, and a diameter of 0.045 inch. Meets CSA/CWB W48-01 standards. Available in a 44-pound spool.

This Hobart FabCOR 86R welding wire is a gas-shielded, metal-cored wire that has the high deposition rates of flux-cored wires and efficiency of solid wire. It is designed for single or multiple pass welding with exceptional low spatter and fume levels due to the spray arc transfer of the wire. It is made of mild steel with a tensile strength of 586 MPa, and a diameter of 0.045 inch. Meets CSA/CWB W48-01 standards. Available in a 44-pound spool.

This FabCO XL-525 MIG welding wire is made of mild steel. It weighs 33 pounds. It can be used for positions including flat, horizontal, overhead, vertical and meets the standards for AWS A5.20, E71T-1MJ H8, E71T-9MJ H8, E71T-12MJ H8, AWS A5.20M, E491T-1MJ H8, E491T-9MJ H8, E491T-12MJ H8, ASME SFA 5.20, E71T-1MJ H8, E71T-9MJ H8, E71 and more.

This FabCO XL-525 MIG welding wire is made of mild steel. It weighs 33 pounds. It can be used for positions including flat, horizontal, overhead, vertical and meets the standards for AWS A5.20, E71T-1MJ H8, E71T-9MJ H8, E71T-12MJ H8, AWS A5.20M, E491T-1MJ H8, E491T-9MJ H8, E491T-12MJ H8, ASME SFA 5.20, E71T-1MJ H8, E71T-9MJ H8, E71 and more.

This Dual Shield II 80-Ni1 H4 MIG welding wire is made of low-alloy. It weighs 15 kilograms. It can be used for MIG welding (GMAW), and meets the standards for AWS A5.36 E81T1-M21A6-Ni1-H4, AWS A5.29 E81T1-Ni1MJDH4, ABS 3YSA(H5), BV, CWB AWS A5.29, DNV IV YMS(H5), LR 4Y40S(H10), MIL-E-24403/1 MIL-81T1-Ni1M, VdTUV.

This Dual Shield II 80-Ni1 H4 MIG welding wire is made of low-alloy. It weighs 15 kilograms. It can be used for MIG welding (GMAW), and meets the standards for AWS A5.36 E81T1-M21A6-Ni1-H4, AWS A5.29 E81T1-Ni1MJDH4, ABS 3YSA(H5), BV, CWB AWS A5.29, DNV IV YMS(H5), LR 4Y40S(H10), MIL-E-24403/1 MIL-81T1-Ni1M, VdTUV.

This Hobart FabCo Excel-Arc 71 gas-shielded, flux-cored welding wire is all-position with low fume emissions, and is designed to be used with carbon dioxide or argon/carbon dioxide mixed gas with easy slag removal and a low hydrogen weld deposit. It is made of mild steel with a tensile strength of 670 MPa, and a diameter of 1/16 inch. Meets CSA/CWB W48-01 standards. Available in a 60-pound coil.

This Hobart FabCo Excel-Arc 71 gas-shielded, flux-cored welding wire is all-position with low fume emissions, and is designed to be used with carbon dioxide or argon/carbon dioxide mixed gas with easy slag removal and a low hydrogen weld deposit. It is made of mild steel with a tensile strength of 670 MPa, and a diameter of 1/16 inch. Meets CSA/CWB W48-01 standards. Available in a 60-pound coil.

This ESAB Dual Shield 7100 Ultra mild steel wire is an all-position wire with a uniquely balanced chemistry to provide greater deposition and improved welding productivity. Used in civil construction, mobile equipment, ship/barge building, industrial and general fabrication, bridge construction, railcar, automotive, and process applications. It has a 1/16-inch diameter with a 605 MPa tensile strength. Available in a 27.2-kilogram coil.

This ESAB Dual Shield 7100 Ultra mild steel wire is an all-position wire with a uniquely balanced chemistry to provide greater deposition and improved welding productivity. Used in civil construction, mobile equipment, ship/barge building, industrial and general fabrication, bridge construction, railcar, automotive, and process applications. It has a 1/16-inch diameter with a 605 MPa tensile strength. Available in a 27.2-kilogram coil.

This ESAB Wire Cord Dual Shield 7100 L mild steel wire is an all-position wire with a uniquely balanced chemistry to provide greater deposition and improved welding productivity. Used in mobile equipment, railcar, ship/barge building, civil construction, industrial and general fabrication, process, and bridge construction applications. It has a 0.045-inch diameter with a 621 MPa tensile strength. Available in a 15-kilogram spool.

This ESAB Wire Cord Dual Shield 7100 L mild steel wire is an all-position wire with a uniquely balanced chemistry to provide greater deposition and improved welding productivity. Used in mobile equipment, railcar, ship/barge building, civil construction, industrial and general fabrication, process, and bridge construction applications. It has a 0.045-inch diameter with a 621 MPa tensile strength. Available in a 15-kilogram spool.

This Hobart FabCO RXR E welding wire is a flat and horizontal position, gas flux cored tubular wire designed for heavy welding applications. This wire is formulated to weld through surface contamination such as rust, mill scale, and oil where more deoxidation would be required. It produces a stable arc, with minimal spatter. It is made of mild steel with a tensile strength of 670 MPa, and a diameter of 3/32 inch. Available in a 60-pound coil.

This Hobart FabCO RXR E welding wire is a flat and horizontal position, gas flux cored tubular wire designed for heavy welding applications. This wire is formulated to weld through surface contamination such as rust, mill scale, and oil where more deoxidation would be required. It produces a stable arc, with minimal spatter. It is made of mild steel with a tensile strength of 670 MPa, and a diameter of 3/32 inch. Available in a 60-pound coil.

This All-State HS-2C MIG welding wire is made of steel alloy. It weighs 10 pounds.

This All-State HS-2C MIG welding wire is made of steel alloy. It weighs 10 pounds.

This MIG welding wire is made of chrome carbide. It weighs 33 pounds and has a 1/16 inch diameter.

This MIG welding wire is made of chrome carbide. It weighs 33 pounds and has a 1/16 inch diameter.