Product ITEM is unavailable. See products from the same category below.
Hand Nailers, Staplers & Tackers
Hand nailers, staplers, and tackers apply brad nails or staples to fix materials in place or fasten them together. They hold strips of fasteners and set them with less effort and more speed than tack hammers. Typical applications include installing building materials and anchoring tubes or cables.
This staple gun has a width of 1 3/5 inch, a height of 5 7/10 inch, and a length of 7 3/10 inch, plus it weighs 1.4 pounds. It features easy-squeeze handle, pinpoint staple guide, reversible belt clip and meets the standards for ASME. In addition, it is made of aluminum.
This staple gun has a width of 1 3/5 inch, a height of 5 7/10 inch, and a length of 7 3/10 inch, plus it weighs 1.4 pounds. It features easy-squeeze handle, pinpoint staple guide, reversible belt clip and meets the standards for ASME. In addition, it is made of aluminum.
This Stanley series staple gun has a width of 9/10 inch, a height of 5 3/10 inch, and a length of 6½ inch. It features 5 inch measuring scale. In addition, it is made of plastic.
This Stanley series staple gun has a width of 9/10 inch, a height of 5 3/10 inch, and a length of 6½ inch. It features 5 inch measuring scale. In addition, it is made of plastic.
This grey stapler and brad nailer has a flat crown staple type. The leg length is 5/8 inches, the nail length is 5/8 inches, the overall length is 7 1/4 inches, and the crown width is 1/2 inches. It has a plastic body, an anti-jam mechanism, high and low power settings, and meets CSA standards.
This grey stapler and brad nailer has a flat crown staple type. The leg length is 5/8 inches, the nail length is 5/8 inches, the overall length is 7 1/4 inches, and the crown width is 1/2 inches. It has a plastic body, an anti-jam mechanism, high and low power settings, and meets CSA standards.
Used for fast installation of carpeting, roofing materials or insulation. Full-rubber grip absorbs shock and protects hand. Heavy-duty steel construction for added durability. Loads two full sticks of heavy-duty staples (1/4 inch - 3/8 inch).
Used for fast installation of carpeting, roofing materials or insulation. Full-rubber grip absorbs shock and protects hand. Heavy-duty steel construction for added durability. Loads two full sticks of heavy-duty staples (1/4 inch - 3/8 inch).
Easy-squeeze handle reduces hand fatigue. Hi/low power lever for hard and soft materials. Heavy-duty aircraft aluminum housing. Anti-jam mechanism. Delivers high power and deep penetration. Easy-slide full-stick staple load. Uses Stanley(R) TRA700 series or Arrow(R) T-50(R) heavy-duty staples.
Easy-squeeze handle reduces hand fatigue. Hi/low power lever for hard and soft materials. Heavy-duty aircraft aluminum housing. Anti-jam mechanism. Delivers high power and deep penetration. Easy-slide full-stick staple load. Uses Stanley(R) TRA700 series or Arrow(R) T-50(R) heavy-duty staples.
This Stanley series staple gun has a width of 1 3/10 inch, a height of 6 3/10 inch, and a length of 7 3/10 inch. It features flush nose, handle lock, staple indicator window. In addition, it is made of steel and has a chrome-plated finish.
This Stanley series staple gun has a width of 1 3/10 inch, a height of 6 3/10 inch, and a length of 7 3/10 inch. It features flush nose, handle lock, staple indicator window. In addition, it is made of steel and has a chrome-plated finish.
Works as a staple gun, brad nailer, cable tacker and wire tacker. All-metal drive channel. Less force to squeeze and more driving power. Heavy-duty aircraft aluminum housing. Hi/lo power lever for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots.
Works as a staple gun, brad nailer, cable tacker and wire tacker. All-metal drive channel. Less force to squeeze and more driving power. Heavy-duty aircraft aluminum housing. Hi/lo power lever for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots.
Delivers outstanding driving power. Hi/lo power for hard and soft materials. Flush-nose design solves the problem of stapling in tight spaces. Contoured grip. Anti-jam mechanism. 8 ft. power cord. Use Stanley(R) TRA700 series or Arrow(R) T-50 heavy-duty staples and 1/2 in, 9/16 in, and 5/8 in brads.
Delivers outstanding driving power. Hi/lo power for hard and soft materials. Flush-nose design solves the problem of stapling in tight spaces. Contoured grip. Anti-jam mechanism. 8 ft. power cord. Use Stanley(R) TRA700 series or Arrow(R) T-50 heavy-duty staples and 1/2 in, 9/16 in, and 5/8 in brads.
This Anti-Vibe series hammer tacker has a width of 1½ inch, a height of 3¾ inch, and a length of 13½ inch. It features ideal for roofing, longer durations, the multi layer grip reduces shock and vibration. In addition, it is made of aluminum.
This Anti-Vibe series hammer tacker has a width of 1½ inch, a height of 3¾ inch, and a length of 13½ inch. It features ideal for roofing, longer durations, the multi layer grip reduces shock and vibration. In addition, it is made of aluminum.
This staple/nail gun has a width of 1 4/5 inch, a height of 6 1/10 inch, and a length of 7 2/5 inch, plus it weighs 2 pounds. It features anti-jam magazine, easy-squeeze technology, lightweight. In addition, it is made of aluminum.
This staple/nail gun has a width of 1 4/5 inch, a height of 6 1/10 inch, and a length of 7 2/5 inch, plus it weighs 2 pounds. It features anti-jam magazine, easy-squeeze technology, lightweight. In addition, it is made of aluminum.
Durable steel construction withstands heavy use. Contractor-quality heavy-duty steel construction. Safety-grip handle guards against hand fatigue and injury. Loads two full sticks of heavy-duty staples (5/16 inch - 1/2 inch).
Durable steel construction withstands heavy use. Contractor-quality heavy-duty steel construction. Safety-grip handle guards against hand fatigue and injury. Loads two full sticks of heavy-duty staples (5/16 inch - 1/2 inch).
This Stanley series staple gun has a width of 1 1/5 inch, a height of 4 9/10 inch, and a length of 6 2/5 inch. It features flush nose, handle lock, spring loaded staple push rod, staple indicator window, unique jam c and more. In addition, it is made of steel and has a chrome-plated finish.
This Stanley series staple gun has a width of 1 1/5 inch, a height of 4 9/10 inch, and a length of 6 2/5 inch. It features flush nose, handle lock, spring loaded staple push rod, staple indicator window, unique jam c and more. In addition, it is made of steel and has a chrome-plated finish.
This hammer tacker has a width of 1 37/100 inch, a height of 3¾ inch, and a length of 14 inch, plus it weighs 2.5 pounds. It features anti-jam magazine. In addition, it is made of aluminum.
This hammer tacker has a width of 1 37/100 inch, a height of 3¾ inch, and a length of 14 inch, plus it weighs 2.5 pounds. It features anti-jam magazine. In addition, it is made of aluminum.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
