General Purpose Spiral-Point Taps

This M2 spiral point tap is made of high speed steel and has a 0.255 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90685 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.255 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90685 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.194 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90525 series spiral point tap has a TiCN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.194 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90525 series spiral point tap has a TiCN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This N311-90425 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This N311-90425 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.367 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-91265 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.367 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-91265 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 12.19mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-83105 series spiral point tap is uncoated, and has metric measurements. It is non-coolant through, has right hand direction with a 96.84 mm length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 12.19mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-83105 series spiral point tap is uncoated, and has metric measurements. It is non-coolant through, has right hand direction with a 96.84 mm length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90445 series spiral point tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90445 series spiral point tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.141 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90365 series spiral point tap has a TiCN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.141 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90365 series spiral point tap has a TiCN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.367 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-91225 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.367 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-91225 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.194 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90585 series spiral point tap has a TiCN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.194 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90585 series spiral point tap has a TiCN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.480 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-91425 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3 13/16 inch length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.480 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-91425 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3 13/16 inch length. Plus it has three flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 4.27mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-80905 series spiral point tap is uncoated, and has metric measurements. It is non-coolant through, has right hand direction with a 53.97mm length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 4.27mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-80905 series spiral point tap is uncoated, and has metric measurements. It is non-coolant through, has right hand direction with a 53.97mm length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 440-80305 series spiral point tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 440-80305 series spiral point tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 3.57mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-80605 series spiral point tap is uncoated, and has metric measurements. It is non-coolant through, has right hand direction with a 49 mm length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 3.57mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-80605 series spiral point tap is uncoated, and has metric measurements. It is non-coolant through, has right hand direction with a 49 mm length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.255 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90805 series spiral point tap has a TiCN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.255 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-90805 series spiral point tap has a TiCN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.318 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This N311-90885 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.318 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This N311-90885 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This M35 spiral point tap is made of cobalt and has a 0.194 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This N413-90535 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has three flutes and a straight shank.

This M35 spiral point tap is made of cobalt and has a 0.194 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This N413-90535 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has three flutes and a straight shank.