Machining
Threading
Taps & Internal Threading Tools
Spiral-Point Taps
General Purpose Spiral-Point Taps
Close

Filter Results By

Search within these results

Shop By

Grainger Brands and Products (47)

In Stock Now (48)

Brand

CLARKSON-OSBORN CLARKSON-OSBORN (1)
CLEVELAND CLEVELAND (269)
GREENFIELD THREADING GREENFIELD THREADING (255)
NORTH AMERICAN NORTH AMERICAN (4)
OSG OSG (77)
SOWA SOWA (5)
WESTWARD (47)
View more View less

Price

Under $10 Under $10 (9)
$10 - $15 $10 - $15 (41)
$15 - $20 $15 - $20 (148)
$20 - $25 $20 - $25 (100)
$25 - $30 $25 - $30 (74)
$30 - $35 $30 - $35 (47)
$35 - $40 (45)

$40 - $50 (53)

$50 - $60 (23)

$60 - $70 (22)

$70 - $80 (14)

$80 - $90 (21)

$90 - $100 (9)

$100 - $200 (37)

$200 - $300 (8)

$300 - $400 (4)

$400 - $500 (2)

$500 - $600 (1)
View more View less

Thread Size

#0-80 #0-80 (12)
#1-64 #1-64 (3)
#1-72 #1-72 (5)
#10-24 #10-24 (25)
#10-32 #10-32 (28)
#12-24 #12-24 (12)
#12-28 (5)

#2-56 (12)

#2-64 (2)

#3-48 (5)

#3-56 (4)

#4-40 (18)

#4-48 (5)

#5-40 (14)

#6-32 (28)

#6-40 (7)

#8-32 (27)

#8-36 (7)

1"-12 (2)

1"-8 (2)

1/2"-13 (23)

1/2"-20 (11)

1/4"-20 (53)

1/4"-28 (23)

3/4"-10 (13)

3/4"-16 (4)

3/8"-16 (27)

3/8"-24 (18)

5/16 in (1)

5/16"-18 (38)

5/16"-24 (18)

5/8"-11 (16)

5/8"-18 (6)

7/16"-14 (16)

7/16"-20 (12)

7/8"-14 (2)

7/8"-9 (2)

9/16"-12 (2)

9/16"-18 (2)

M1.6x0.35 (2)

M1.8x0.35 (2)

M10x1.25 (5)

M10x1.50 (10)

M12x1.25 (6)

M12x1.75 (9)

M14x1.5 (1)

M14x1.50 (5)

M14x2.00 (5)

M16x1.50 (6)

M16x2.00 (7)

M18x1.50 (3)

M18x2.50 (3)

M2.2x0.45 (2)

M2.5x0.45 (3)

M20x1.50 (1)

M20x2.50 (3)

M2x0.40 (4)

M3.5x0.60 (5)

M3x0.50 (10)

M4.5x0.75 (2)

M4x0.70 (10)

M5x0.80 (9)

M6x1.00 (11)

M7x1.00 (4)

M8 (3)

M8x1.0 (1)

M8x1.00 (4)

M8x1.25 (11)
View more View less

Thread Standard

Metric Metric (36)
Metric Coarse Metric Coarse (84)
Metric Fine Metric Fine (27)
UNC UNC (341)
UNF UNF (170)

Tap Material

Cobalt Cobalt (105)
High Speed Steel High Speed Steel (547)
Vanadium High Speed Steel E Vanadium High Speed Steel E (5)

Tap Finish

Black Oxide Black Oxide (15)
Bright (Uncoated) Bright (Uncoated) (332)
Hard Lube Hard Lube (51)
Oxide Oxide (33)
Steam Oxide Steam Oxide (74)
TiCN TiCN (72)
TiN (81)
View more View less

Thread Length

0.492 in 0.492 in (1)
0.5 in 0.5 in (3)
0.5900 in 0.5900 in (4)
0.748 in 0.748 in (2)
0.8670 in 0.8670 in (4)
0.9300 in 0.9300 in (4)
0.984 in (1)

1 1/4 in (27)

1 1/64 in (4)

1 1/8 in (43)

1 13/16 in (12)

1 19/64 in (4)

1 21/32 in (25)

1 3/32 in (1)

1 3/8 in (2)

1 7/16 in (16)

1 7/32 in (4)

1 7/64 in (4)

1 in (54)

1.125 in (1)

1.1400 in (12)

1.38 in (2)

1.813 in (5)

1/2 in (17)

10.00 mm (2)

11.00 mm (5)

11.11 mm (5)

11/16 in (38)

12.7 mm (1)

13.00 mm (1)

14.00 mm (2)

15.00 mm (2)

15.87 mm (1)

15.88 mm (4)

15/16 in (13)

16.00 mm (1)

17.00 mm (4)

17.46 mm (1)

17.53 mm (1)

18.00 mm (4)

19.00 mm (2)

19.05 mm (7)

2 in (9)

20.00 mm (5)

22.00 mm (1)

22.22 mm (4)

22.23 mm (1)

22.33 mm (2)

23/64 in (2)

24.00 mm (1)

25.00 mm (2)

25.40 mm (5)

25/32 in (4)

25/64 in (7)

26.00 mm (3)

28.5 mm (2)

28.57 mm (1)

28.58 mm (4)

29.00 mm (15)

3/4 in (33)

3/8 in (21)

31.75 mm (6)

32 mm (1)

32.00 mm (4)

33/64 in (4)

34.00 mm (2)

35/64 in (4)

42.00 mm (2)

42.07 mm (11)

43/64 in (4)

45/64 in (4)

46.00 mm (1)

46.04 mm (11)

5/16 in (22)

5/8 in (27)

50.80 mm (3)

51.00 mm (1)

63/64 in (4)

7/16 in (20)

7/8 in (46)

9/16 in (12)
View more View less

Overall Length

1 11/16 in 1 11/16 in (3)
1 13/16 in 1 13/16 in (5)
1 15/16 in 1 15/16 in (8)
1 3/4 in 1 3/4 in (11)
1 5/8 in 1 5/8 in (12)
1 7/8 in 1 7/8 in (18)
1.688 in (5)

1.7717 in (1)

1.813 in (3)

1.88 in (1)

1.938 in (3)

1.94 in (1)

1.9685 in (1)

102 mm (1)

102.00 mm (1)

115.00 mm (1)

17.46 mm (1)

2 1/2 in (71)

2 1/8 in (29)

2 15/16 in (29)

2 23/32 in (30)

2 3/8 in (57)

2 5/7 in (1)

2 in (31)

2.13 in (1)

2.2047 in (14)

2.38 in (3)

2.4803 in (6)

2.7188 in (7)

2.719 in (17)

2.7559 in (6)

2.938 in (11)

3 13/16 in (12)

3 19/32 in (3)

3 3/16 in (1)

3 3/8 in (28)

3 5/32 in (14)

3.1496 in (12)

3.156 in (9)

3.1562 in (1)

3.375 in (2)

3.5433 in (8)

3.813 in (6)

3.937 in (12)

4 1/32 in (1)

4 1/4 in (13)

4 15/32 in (1)

4.3307 in (24)

4.9213 in (8)

42.86 mm (1)

44.00 mm (1)

44.45 mm (8)

46.00 mm (1)

46.04 mm (2)

49.00 mm (3)

49.21 mm (5)

5.5118 in (5)

50.8 mm (1)

51.00 mm (1)

53.00 mm (1)

53.97 mm (2)

53.98 mm (4)

6 in (10)

6.2992 in (4)

60.00 mm (1)

60.32 mm (2)

60.33 mm (6)

63.00 mm (1)

63.5 mm (4)

63.50 mm (2)

64.00 mm (1)

69.00 mm (1)

69.05 mm (2)

69.06 mm (8)

69.09 mm (2)

7/16 in (1)

74.00 mm (1)

74.61 mm (7)

74.68 mm (1)

85.72 mm (4)

85.73 mm (4)

85.85 mm (1)

86.00 mm (2)

91.19 mm (1)

91.28 mm (3)

96.77 mm (1)

96.84 mm (8)
View more View less

75% Thread Drill Size

#21 #21 (25)
#25 #25 (24)
#29 #29 (5)
#33 #33 (5)
#36 #36 (25)
#39 #39 (14)
#46 (7)

#53 (5)

#7 (49)

0.3125 in (6)

0.3438 in (1)

0.4219 in (2)

1.20 mm (9)

1.25 mm (2)

1.36 mm (3)

1.40 mm (1)

1.45 mm (4)

1.60 mm (4)

1.73 mm (11)

1.75 mm (2)

1.80 mm (2)

10.30 mm (8)

10.78 mm (5)

11.40 mm (10)

11/32 in (4)

12.00 mm (5)

12.20 mm (2)

12.25 mm (1)

12.50 mm (4)

12.90 mm (2)

13.60 mm (15)

14.00 mm (5)

14.50 mm (11)

15.50 mm (3)

16.50 mm (15)

17.50 mm (7)

18.50 mm (1)

19.50 mm (2)

2.00 mm (4)

2.20 mm (17)

2.32 mm (5)

2.50 mm (9)

2.90 mm (7)

20.40 mm (2)

22.25 mm (2)

23.30 mm (2)

27/64 in (17)

3.30 mm (9)

3.40 mm (24)

3.50 mm (2)

4.20 mm (8)

4.45 mm (12)

4.60 mm (5)

5.00 mm (9)

5.45 mm (20)

5/16 in (18)

6.00 mm (4)

7 mm (1)

7.00 mm (4)

8.50 mm (25)

9.95 mm (12)

F (35)

H (8)

I (19)

U (15)
View more View less

Tap Chamfer

Bottoming Bottoming (36)
Plug Plug (618)

Thread Limit

2B 2B (96)
6H 6H (43)
D3 D3 (20)
D4 D4 (18)
D5 D5 (30)
D6 D6 (24)
D7 (11)

H1 (23)

H10 (4)

H11 (4)

H13 (3)

H2 (107)

H3 (226)

H4 (5)

H5 (31)

H7 (11)
View more View less

Class of Fit

1B 1B (1)
2B 2B (391)
2B, 3B 2B, 3B (31)
3B 3B (48)
6H 6H (81)
H3 H3 (39)
JIS 2 (44)
View more View less

Number of Flutes

2 2 (350)
3 3 (286)
4 4 (21)

Primary Material Application

All Materials All Materials (389)
Aluminum, Brass, Bronze, Copper Aluminum, Brass, Bronze, Copper (26)
Aluminum, Brass, Bronze, Copper, Steel Aluminum, Brass, Bronze, Copper, Steel (12)
Aluminum, Cast Iron, Steel Aluminum, Cast Iron, Steel (28)
Aluminum, Steel Aluminum, Steel (1)
Cast Iron, Stainless Steel, Steel Cast Iron, Stainless Steel, Steel (51)
Cast Iron, Steel (19)

Stainless Steel, Steel (73)

Steel (40)
View more View less

General Purpose Spiral-Point Taps

General purpose spiral-point taps are intended for threading a wide range of materials. The taps have straight flutes with a spiral point that pushes chips in front of the tap as it moves into a hole and out the other side, eventually forcing the chips out of the hole. They create internal threads in through holes and are installed into a toolholder on a machine such as a lathe or CNC machine to operate.

https://catalogue.grainger.ca/?hybris=true

658 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

SPIRAL POINT TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN LENGTH, PLUG, 2 FLUTES

WESTWARD
SPIRAL POINT TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN LENGTH, PLUG, 2 FLUTES
Item # WSW5TWH9
Mfr. Model # 5TWH9

EHC: EHC :

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 440-80305 series spiral point tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.168 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 440-80305 series spiral point tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $10.63 / EACH

EHC: EHC :

Qty:

Compare

HAND TAP, SPIRAL POINT, H2, BRIGHT, #6-32 UNC, 2 IN L, 0.141 IN DIA, HIGH SPEED STEEL

CLEVELAND
HAND TAP, SPIRAL POINT, H2, BRIGHT, #6-32 UNC, 2 IN L, 0.141 IN DIA, HIGH SPEED STEEL
Item # GNF1011-57070
Mfr. Model # 1011-57070

EHC: EHC :

This spiral point hand tap is two inches long, with a #6-32 UNC thread and a 0.141-inch shank diameter. This bright, right hand tap has an H2 thread limit and is made from high speed steel.

This spiral point hand tap is two inches long, with a #6-32 UNC thread and a 0.141-inch shank diameter. This bright, right hand tap has an H2 thread limit and is made from high speed steel.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $15.44 / EACH

EHC: EHC :

Qty:

Compare

WESTWARD
SPIRAL POINT TAP, ¼"-20 THREAD, 1 IN THREAD L, 2½ IN LENGTH, PLUG, 2 FLUTES
Item # WSW5TWD1
Mfr. Model # 5TWD1

EHC: EHC :

This M2 spiral point tap is made of high speed steel and has a 0.255 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90685 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.255 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90685 series spiral point tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.93 / EACH

EHC: EHC :

Qty:

Compare

OSG
SPIRAL POINT TAP, ¼"-20 THREAD, ⅝ IN THREAD L, 2½ IN LENGTH, PLUG, RIGHT HAND
Item # OSG2885600
Mfr. Model # 2885600

EHC: EHC :

This tap is made of high speed steel and has a 0.255 inch diameter, 1.4930 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.255 inch diameter, 1.4930 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $12.21 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, #6-32 THREAD, 11/16 IN THREAD L, 2 IN LENGTH, PLUG, RIGHT HAND

WESTWARD
SPIRAL POINT TAP, #6-32 THREAD, 11/16 IN THREAD L, 2 IN LENGTH, PLUG, RIGHT HAND
Item # WSW5TWC7
Mfr. Model # 5TWC7

EHC: EHC :

This M2 spiral point tap is made of high speed steel and has a 0.141 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90365 series spiral point tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.

This M2 spiral point tap is made of high speed steel and has a 0.141 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-90365 series spiral point tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.93 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, M4X0.7 THREAD, 9.65MM THREAD L, 54.1MM OVERALL L, PLUG, METRIC, HSS

CLEVELAND
SPIRAL POINT TAP, M4X0.7 THREAD, 9.65MM THREAD L, 54.1MM OVERALL L, PLUG, METRIC, HSS
Item # GNF1011-57080
Mfr. Model # 1011-57080

EHC: EHC :

This hand tap is made of high speed steel and has a 4.27mm diameter, 34.93mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 53.98mm length. Plus it has two flutes and a straight shank.

This hand tap is made of high speed steel and has a 4.27mm diameter, 34.93mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 53.98mm length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $22.09 / EACH

EHC: EHC :

Qty:

Compare

GREENFIELD THREADING
SPIRAL POINT TAP, ⅜"-16 THREAD, ¾ IN THREAD L, 2 15/16 IN L, HIGH SPEED STEEL
Item # GNF357520
Mfr. Model # 357520

EHC: EHC :

This tap is made of high speed steel and has a ⅜ inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2.938 inch length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a ⅜ inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2.938 inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $16.64 / EACH

EHC: EHC :

Qty:

Compare

PURPOSE SPIRAL-POINT TAP, M10-1.50 THREAD, 31.75MM THREAD L, PLUG, 3 FLUTES, HSS

GREENFIELD THREADING
PURPOSE SPIRAL-POINT TAP, M10-1.50 THREAD, 31.75MM THREAD L, PLUG, 3 FLUTES, HSS
Item # GNF360942
Mfr. Model # 360942

EHC: EHC :

This tap is made of high speed steel and has a 1mm diameter shank. It is designed for use with stainless steel/steel, and meets the standards for USCTI. This tap has a TiN finish, and has metric measurements. It has right hand direction with a 74.61mm length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 1mm diameter shank. It is designed for use with stainless steel/steel, and meets the standards for USCTI. This tap has a TiN finish, and has metric measurements. It has right hand direction with a 74.61mm length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $26.58 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, #10-24 THREAD, ½ IN THREAD L, 2⅜ IN L, HIGH SPEED STEEL, UNC

GREENFIELD THREADING
SPIRAL POINT TAP, #10-24 THREAD, ½ IN THREAD L, 2⅜ IN L, HIGH SPEED STEEL, UNC
Item # GNF356662
Mfr. Model # 356662

EHC: EHC :

This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $18.77 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN L, TIN, HIGH SPEED STEEL

GREENFIELD THREADING
SPIRAL POINT TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN L, TIN, HIGH SPEED STEEL
Item # GNF356635
Mfr. Model # 356635

EHC: EHC :

This tap is made of high speed steel and has a 0.164 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.164 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $18.72 / EACH

EHC: EHC :

Qty:

Compare

PURPOSE SPIRAL-POINT TAP, M8-1.25 THREAD, 28.57MM THREAD L, PLUG, 2 FLUTES, HSS

GREENFIELD THREADING
PURPOSE SPIRAL-POINT TAP, M8-1.25 THREAD, 28.57MM THREAD L, PLUG, 2 FLUTES, HSS
Item # GNF360926
Mfr. Model # 360926

EHC: EHC :

This tap is made of high speed steel and has a 8mm diameter shank. It is designed for use with stainless steel/steel, and meets the standards for USCTI. This tap has a TiN finish, and has metric measurements. It has right hand direction with a 69.06mm length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 8mm diameter shank. It is designed for use with stainless steel/steel, and meets the standards for USCTI. This tap has a TiN finish, and has metric measurements. It has right hand direction with a 69.06mm length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $24.65 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, #10-24 THREAD, ½ IN THREAD L, 2 11/32 IN L, PLUG, RIGHT HAND

OSG
SPIRAL POINT TAP, #10-24 THREAD, ½ IN THREAD L, 2 11/32 IN L, PLUG, RIGHT HAND
Item # OSG2885400
Mfr. Model # 2885400

EHC: EHC :

This tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $12.21 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, M5X0.8 THREAD, 22.22MM THREAD L, 60.32MM OVERALL L, HIGH SPEED STEEL

GREENFIELD THREADING
SPIRAL POINT TAP, M5X0.8 THREAD, 22.22MM THREAD L, 60.32MM OVERALL L, HIGH SPEED STEEL
Item # GNF360868
Mfr. Model # 360868

EHC: EHC :

This tap is made of high speed steel and has a 5mm diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has metric measurements. It has right hand direction with a 60.33mm length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 5mm diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has metric measurements. It has right hand direction with a 60.33mm length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $22.93 / EACH

EHC: EHC :

Qty:

Compare

SPIRAL POINT TAP, #10-32 THREAD, ½ IN THREAD L, 2 11/32 IN L, PLUG, RIGHT HAND

OSG
SPIRAL POINT TAP, #10-32 THREAD, ½ IN THREAD L, 2 11/32 IN L, PLUG, RIGHT HAND
Item # OSG2885500
Mfr. Model # 2885500

EHC: EHC :

This tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $12.21 / EACH

EHC: EHC :

Qty:

Compare

OSG
SPIRAL POINT TAP, ⅜"-16 THREAD, ¾ IN THREAD L, 2 29/32 IN L, PLUG, RIGHT HAND
Item # OSG2886001
Mfr. Model # 2886001

EHC: EHC :

This tap is made of high speed steel and has a 0.381 inch diameter, 1.6820 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 0.381 inch diameter, 1.6820 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.54 / EACH

EHC: EHC :

Qty:

Compare

OSG
SPIRAL POINT TAP, 5/16"-18 THREAD, 11/16 IN THREAD L, 2 23/32 IN L, PLUG, 2B/H3
Item # OSG2885800
Mfr. Model # 2885800

EHC: EHC :

This tap is made of high speed steel and has a 0.318 inch diameter, 1.5910 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.318 inch diameter, 1.5910 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $15.31 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Search within these results

General Purpose Spiral-Point Taps

658 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty