Product ITEM is unavailable. See products from the same category below.
General Purpose Diagonal-Cutting Pliers
General purpose diagonal-cutting pliers trim wire and zip ties, shear through thin screws and nails, and nip and strip wire jackets in applications where insulated or non-sparking pliers aren't required. Also known as wire cutters, their blade-like cutting edges are offset from the handles to cut closely against surfaces. They concentrate leverage in their short jaws to maximize cutting force.
Lightweight flush cutter. Shears wire up to 18 AWG producing a flat, flush cut. Shear cutting greatly reduces cutting effort and minimizes fly-off. Cushioned grips and steel return spring for increased comfort during repetitive cutting. Ultra slim profile increases access in confined areas. 5 in.
Lightweight flush cutter. Shears wire up to 18 AWG producing a flat, flush cut. Shear cutting greatly reduces cutting effort and minimizes fly-off. Cushioned grips and steel return spring for increased comfort during repetitive cutting. Ultra slim profile increases access in confined areas. 5 in.
8 inch high leverage diagonal cutter with ultra durable 2000 series blades designed and heat treated to cut bolts, nails and hard wires without damage. 36% greater cutting/gripping power. Standard-bevel cutting knives. Plastic-dipped hand-form style handles.
8 inch high leverage diagonal cutter with ultra durable 2000 series blades designed and heat treated to cut bolts, nails and hard wires without damage. 36% greater cutting/gripping power. Standard-bevel cutting knives. Plastic-dipped hand-form style handles.
4-1/4 inch midget tapered nose diagonal cutting plier. Miniature jaw for close-quarter work with maximum visibility. Sharp pointed nose for precise tip cutting. Spring-loaded action for self-opening.
4-1/4 inch midget tapered nose diagonal cutting plier. Miniature jaw for close-quarter work with maximum visibility. Sharp pointed nose for precise tip cutting. Spring-loaded action for self-opening.
5 inch midget standard diagonal cutter with tapered nose. This is the basic Klein diagonal cutting pliers with tapered nose and standard-bevel cutting knives. Red plastic-dipped handles.
5 inch midget standard diagonal cutter with tapered nose. This is the basic Klein diagonal cutting pliers with tapered nose and standard-bevel cutting knives. Red plastic-dipped handles.
This cutting pliers has a length of 8 5/32 inch, plus it weighs 11.2 ounce and is insulated. The handle is grey/orange. It features cuts acsr, screws, nails and most hardened wire. induction hardened for long life, multicolou and more and meets the standards for ASTM F1505, IEC 60900.
This cutting pliers has a length of 8 5/32 inch, plus it weighs 11.2 ounce and is insulated. The handle is grey/orange. It features cuts acsr, screws, nails and most hardened wire. induction hardened for long life, multicolou and more and meets the standards for ASTM F1505, IEC 60900.
High-leverage diagonal-cutting pliers, angled head design for easy working in confined spaces, hooked handle for improved grip, high-leverage design. Rivet is closer to the cutting edge. 9 inches.
High-leverage diagonal-cutting pliers, angled head design for easy working in confined spaces, hooked handle for improved grip, high-leverage design. Rivet is closer to the cutting edge. 9 inches.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 9.8 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 9.8 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 11.2 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 11.2 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
5 inch midget pointed nose diagonal cutter. Sharp nose for working in confined areas. Widely used for trimming printed circuit boards. Specifically designed for tip cutting. Semi-flush cutting knives. With coil spring. Plastic-dipped handles.
5 inch midget pointed nose diagonal cutter. Sharp nose for working in confined areas. Widely used for trimming printed circuit boards. Specifically designed for tip cutting. Semi-flush cutting knives. With coil spring. Plastic-dipped handles.
Diagonal-cutting/pointed nose, narrow jaw plier. Narrow jaw and hinge for delicate work in tight areas. Sharp pointed-nose for precise tip cutting. Spring-loaded action for self-opening. 5 inches.
Diagonal-cutting/pointed nose, narrow jaw plier. Narrow jaw and hinge for delicate work in tight areas. Sharp pointed-nose for precise tip cutting. Spring-loaded action for self-opening. 5 inches.
8 inch high leverage diagonal pliers with angled head. High-leverage, heavy-duty with head angled for easier work in confined areas. Standard-bevel cutting knives, plastic-dipped handles.
8 inch high leverage diagonal pliers with angled head. High-leverage, heavy-duty with head angled for easier work in confined areas. Standard-bevel cutting knives, plastic-dipped handles.
W & V notches diagonal bell-system pliers. W notches to cleanly slit insulation.V notch at the hinge for quick insulation crushing. Tapered nose for easy working in confined areas and close tip cutting.
W & V notches diagonal bell-system pliers. W notches to cleanly slit insulation.V notch at the hinge for quick insulation crushing. Tapered nose for easy working in confined areas and close tip cutting.
This diagonal cutting pliers has a length of 7¾ inch, plus it weighs 8.8 ounce and is not insulated. The handle is red and has a pistol grip style/type. It features not designed for use on metal. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip. This diagonal cutting pliers is designed for: gates, injection mould sprues, plastic.
This diagonal cutting pliers has a length of 7¾ inch, plus it weighs 8.8 ounce and is not insulated. The handle is red and has a pistol grip style/type. It features not designed for use on metal. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip. This diagonal cutting pliers is designed for: gates, injection mould sprues, plastic.
This 2000 series diagonal cutting pliers has a length of 9 inch, plus it weighs 10.3 ounce and is not insulated. The handle is yellow. It features angled head, longer handles for added leverage, reach and comfort. In addition, it is not tether ready with a plastic grip.
This 2000 series diagonal cutting pliers has a length of 9 inch, plus it weighs 10.3 ounce and is not insulated. The handle is yellow. It features angled head, longer handles for added leverage, reach and comfort. In addition, it is not tether ready with a plastic grip.
This diagonal cutting pliers has a length of 7 31/32 inch, plus it weighs 9.6 ounce and is not insulated. The handle is red. It features high leverage, hot-riveted joint, short jaws and bevelled cutting edges. In addition, it is not tether ready with a plastic grip.
This diagonal cutting pliers has a length of 7 31/32 inch, plus it weighs 9.6 ounce and is not insulated. The handle is red. It features high leverage, hot-riveted joint, short jaws and bevelled cutting edges. In addition, it is not tether ready with a plastic grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
