Product ITEM is unavailable. See products from the same category below.
General Purpose Diagonal-Cutting Pliers
General purpose diagonal-cutting pliers trim wire and zip ties, shear through thin screws and nails, and nip and strip wire jackets in applications where insulated or non-sparking pliers aren't required. Also known as wire cutters, their blade-like cutting edges are offset from the handles to cut closely against surfaces. They concentrate leverage in their short jaws to maximize cutting force.
5 inch midget pointed nose diagonal cutter. Sharp nose for working in confined areas. Widely used for trimming printed circuit boards. Specifically designed for tip cutting. Semi-flush cutting knives. With coil spring. Plastic-dipped handles.
5 inch midget pointed nose diagonal cutter. Sharp nose for working in confined areas. Widely used for trimming printed circuit boards. Specifically designed for tip cutting. Semi-flush cutting knives. With coil spring. Plastic-dipped handles.
Designed to reach into enclosed areas, grip small objects, bend loops, and attach wires using these heavy-duty long reach pliers. These pliers have a serrated straight jaw and measure 11 1/2 inches long.
Designed to reach into enclosed areas, grip small objects, bend loops, and attach wires using these heavy-duty long reach pliers. These pliers have a serrated straight jaw and measure 11 1/2 inches long.
This cutting pliers has a length of four inches. The handle is green. It features allows use between closely spaced components, cushion grips and meets the standards for ESD. In addition, it has a standard cushion grip.
This cutting pliers has a length of four inches. The handle is green. It features allows use between closely spaced components, cushion grips and meets the standards for ESD. In addition, it has a standard cushion grip.
This Not Applicable series pliers has a length of 7 inch, plus it weighs 0.49 pounds and is not insulated. The handle is red. It features lasting edge laser-hardened. In addition, it is made of steel, has a coated finish, plus it is non-sparking, and is tether ready with a plastisol standard cushion grip. These pliers is designed for: bolt, nails, wire.
This Not Applicable series pliers has a length of 7 inch, plus it weighs 0.49 pounds and is not insulated. The handle is red. It features lasting edge laser-hardened. In addition, it is made of steel, has a coated finish, plus it is non-sparking, and is tether ready with a plastisol standard cushion grip. These pliers is designed for: bolt, nails, wire.
These pliers has a length of 8 inches and is not insulated. The handle is multicolour. It features lasting edge laser-hardened. In addition, it is made of steel, plus it is non-sparking, and is tether ready with a deluxe cushion grip. These pliers is designed for: bolt, nails, wire.
These pliers has a length of 8 inches and is not insulated. The handle is multicolour. It features lasting edge laser-hardened. In addition, it is made of steel, plus it is non-sparking, and is tether ready with a deluxe cushion grip. These pliers is designed for: bolt, nails, wire.
This diagonal cutting pliers has a length of six inches. The handle is blue/yellow. It features induction hardened cutting edge stays sharper, lifetime guarantee, longer, meets or exceeds a and more and meets the standards for ANSI.
This diagonal cutting pliers has a length of six inches. The handle is blue/yellow. It features induction hardened cutting edge stays sharper, lifetime guarantee, longer, meets or exceeds a and more and meets the standards for ANSI.
These precision diagonal-cutting pliers are suitable for precise cuts through thin wires and cables. Featuring a spring return and a rubber handle for grip, these pliers have an overall length of five inches and a jaw 1/2 inch in length.
These precision diagonal-cutting pliers are suitable for precise cuts through thin wires and cables. Featuring a spring return and a rubber handle for grip, these pliers have an overall length of five inches and a jaw 1/2 inch in length.
This diagonal cutting pliers has a length of 7½ inch, plus it weighs 0.42 pounds and is not insulated. The handle is blue and has a standard style/type. It features long reach design, longer cutting edge and meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a standard cushion grip. This diagonal cutting pliers is designed for: copper, plastic.
This diagonal cutting pliers has a length of 7½ inch, plus it weighs 0.42 pounds and is not insulated. The handle is blue and has a standard style/type. It features long reach design, longer cutting edge and meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a standard cushion grip. This diagonal cutting pliers is designed for: copper, plastic.
This diagonal cutting pliers has a length of 8 inches and is insulated. The handle is orange and has a standard style/type. It features perspiration, water, oil and chemical-resistant and meets the standards for UL, ASTM F1505-01, IEC 60 900, OSHA. In addition, it is made of steel, plus it is non-sparking, and is not tether ready.
This diagonal cutting pliers has a length of 8 inches and is insulated. The handle is orange and has a standard style/type. It features perspiration, water, oil and chemical-resistant and meets the standards for UL, ASTM F1505-01, IEC 60 900, OSHA. In addition, it is made of steel, plus it is non-sparking, and is not tether ready.
This diagonal cutting pliers has a length of 5 inch, plus it weighs 0.143 pounds and is not insulated. The handle is blue and has a pistol grip style/type. It features lightweight and meets the standards for ASME B107.11, ISO 5749. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a thermoplastic rubber standard cushion grip.
This diagonal cutting pliers has a length of 5 inch, plus it weighs 0.143 pounds and is not insulated. The handle is blue and has a pistol grip style/type. It features lightweight and meets the standards for ASME B107.11, ISO 5749. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a thermoplastic rubber standard cushion grip.
This diagonal cutting pliers has a length of 5 inch, plus it weighs 0.128 pounds and is not insulated. The handle is multicolour and has a standard style/type. It features forged, manifold oil-hardened, precisely ground and sharp cutting edges with small bevels for and more and meets the standards for DIN ISO 9654. In addition, it has a polished finish, plus it is non-sparking, and is tether ready. This diagonal cutting pliers is designed for: ultra fine cutting work.
This diagonal cutting pliers has a length of 5 inch, plus it weighs 0.128 pounds and is not insulated. The handle is multicolour and has a standard style/type. It features forged, manifold oil-hardened, precisely ground and sharp cutting edges with small bevels for and more and meets the standards for DIN ISO 9654. In addition, it has a polished finish, plus it is non-sparking, and is tether ready. This diagonal cutting pliers is designed for: ultra fine cutting work.
5 inch midget standard diagonal cutter with tapered nose. This is the basic Klein diagonal cutting pliers with tapered nose and standard-bevel cutting knives. Red plastic-dipped handles.
5 inch midget standard diagonal cutter with tapered nose. This is the basic Klein diagonal cutting pliers with tapered nose and standard-bevel cutting knives. Red plastic-dipped handles.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
