Gasket Sealants & Makers

This multi-purpose sealant is a one-part, non-sage, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 Degrees C to 180 Degrees C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 300-millilitre tube.

This multi-purpose sealant is a one-part, non-sage, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 Degrees C to 180 Degrees C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 300-millilitre tube.

This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in a 300-millilitre cartridge.

This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in a 300-millilitre cartridge.

This multi-purpose sealant is a one-component, non-sag, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 to 180 Degrees ​C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 90 millilitre tube.

This multi-purpose sealant is a one-component, non-sag, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 to 180 Degrees ​C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 90 millilitre tube.

TF-15 thread sealing compound contains, in part, reprocessed PTFE fluorocarbon resin and molybdenum disulfide (MoS2) in a high-melting, high temperature grease vehicle. Non-volatile, 227 mL.

TF-15 thread sealing compound contains, in part, reprocessed PTFE fluorocarbon resin and molybdenum disulfide (MoS2) in a high-melting, high temperature grease vehicle. Non-volatile, 227 mL.

This 736 gasket sealant is red and comes in a 10.14 fluid ounce cartridge. It meets the standards for FDA 21 CFR 177.2600, MIL-A-46106, NSF 51, UL 94 HB. This gasket sealant has a working time of 10 minutes.

This 736 gasket sealant is red and comes in a 10.14 fluid ounce cartridge. It meets the standards for FDA 21 CFR 177.2600, MIL-A-46106, NSF 51, UL 94 HB. This gasket sealant has a working time of 10 minutes.

This SI 596 gasket sealant is red and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket sealant has a working time of 30 minutes.

This SI 596 gasket sealant is red and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket sealant has a working time of 30 minutes.

This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in an 80-millilitre tube.

This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in an 80-millilitre tube.

This single-component, room temperature vulcanizing, elastomeric sealant makes leak-proof gaskets immediately. The black, thixotropic, non-slumping paste can withstand a continuous temperature range of -59 to 232 Degrees C and has a flashpoint of greater than 93 Degrees C. This sensor-safe, non-corrosive sealant begins to harden in five minutes and fully cures in 24 hours. This product comes in a 300-millilitre cartridge.

This single-component, room temperature vulcanizing, elastomeric sealant makes leak-proof gaskets immediately. The black, thixotropic, non-slumping paste can withstand a continuous temperature range of -59 to 232 Degrees C and has a flashpoint of greater than 93 Degrees C. This sensor-safe, non-corrosive sealant begins to harden in five minutes and fully cures in 24 hours. This product comes in a 300-millilitre cartridge.

This slow-drying, non-hardening gasket sealant seals flanges, fittings, connections, and flexible assemblies against leaks. The black, viscous paste can withstand a continuous temperature range of -54 to 204 Degrees C. Made up of modified resin, fillers, and alcohol, this sealant fully cures in 24 hours. This product comes in an 80-millilitre tube.

This slow-drying, non-hardening gasket sealant seals flanges, fittings, connections, and flexible assemblies against leaks. The black, viscous paste can withstand a continuous temperature range of -54 to 204 Degrees C. Made up of modified resin, fillers, and alcohol, this sealant fully cures in 24 hours. This product comes in an 80-millilitre tube.

This 515 anaerobic gasket maker is purple and comes in a 1.69 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This anaerobic gasket maker has a working time of 30 minutes.

This 515 anaerobic gasket maker is purple and comes in a 1.69 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This anaerobic gasket maker has a working time of 30 minutes.

Gasket Kleen(TM) is a solvent based, high strength cleaner that effectively loosens and helps remove fibre gaskets, gasket adhesives and sealants. Loosens carbon deposits. Excellent paint, varnish, and graffiti remover.

Gasket Kleen(TM) is a solvent based, high strength cleaner that effectively loosens and helps remove fibre gaskets, gasket adhesives and sealants. Loosens carbon deposits. Excellent paint, varnish, and graffiti remover.

This highly flexible, anaerobic gasket maker seals and repairs gaskets and flanges with vibration or pressure. The blue gel can withstand a temperature range of -54 to 149 Degrees C and has a flashpoint greater than 93 Degrees C. It fully cures in 24 hours. This methacrylate ester-based product comes in a 50-millilitre tube.

This highly flexible, anaerobic gasket maker seals and repairs gaskets and flanges with vibration or pressure. The blue gel can withstand a temperature range of -54 to 149 Degrees C and has a flashpoint greater than 93 Degrees C. It fully cures in 24 hours. This methacrylate ester-based product comes in a 50-millilitre tube.

Multi-purpose sealant, 732 is a general purpose sealing and bonding as a space filling rubber adhesive or a formed-in-place gasket. May be applied overhead or on sidewalls. Continuous from -75 to +350 degrees F: intermittent to 400 degrees F.

Multi-purpose sealant, 732 is a general purpose sealing and bonding as a space filling rubber adhesive or a formed-in-place gasket. May be applied overhead or on sidewalls. Continuous from -75 to +350 degrees F: intermittent to 400 degrees F.

This gasket maker is a single component, room temperature vulcanizing sealant designed for heavy-duty oil applications. The black, thixotropic, silicone paste dries tack-free in two hours and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic product comes in a 300-millilitre cartridge.

This gasket maker is a single component, room temperature vulcanizing sealant designed for heavy-duty oil applications. The black, thixotropic, silicone paste dries tack-free in two hours and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic product comes in a 300-millilitre cartridge.

This SI 595 gasket sealant is clear and comes in a 10.14 fluid ounce cartridge. It meets the standards for ANSI/NSF Standard 51, California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket sealant has a working time of 30 minutes.

This SI 595 gasket sealant is clear and comes in a 10.14 fluid ounce cartridge. It meets the standards for ANSI/NSF Standard 51, California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket sealant has a working time of 30 minutes.

The Right Stuff(R) gasket maker. Heavy-bodied, black, elastometric rubber gasket. Superior flexibility and adhesion. Noncorrosive. Low odor. Low volatility. Used in OE assembly lines. Temperature range of -59 degrees C to 232 degrees C. Excellent oil and transmission fluid resistance.

The Right Stuff(R) gasket maker. Heavy-bodied, black, elastometric rubber gasket. Superior flexibility and adhesion. Noncorrosive. Low odor. Low volatility. Used in OE assembly lines. Temperature range of -59 degrees C to 232 degrees C. Excellent oil and transmission fluid resistance.