Food & Beverage Polyethylene Tubing

This FDA-certified, clear polyethylene tubing is 100 feet long with a tube bend radius of 3/4 inch and a wall thickness of 1/16 inch. The inside diameter is 1/8 inch and the outside diameter is 1/4 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This FDA-certified, clear polyethylene tubing is 100 feet long with a tube bend radius of 3/4 inch and a wall thickness of 1/16 inch. The inside diameter is 1/8 inch and the outside diameter is 1/4 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This tubing meets the standards for NSF 51, 61, FDA, has a length of 100 feet, a maximum operating pressure of 272 psi @ 75 Degrees F and is designed for the following applications: air, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is chemical-resistant and is made of polyethylene. In addition, it has ⅜ inch OD, ¼ inch ID, with an inch system of measurement, with 0.06 inch wall thickness, and Shore D 45 hardness. This tubing is for use with water.

This tubing meets the standards for NSF 51, 61, FDA, has a length of 100 feet, a maximum operating pressure of 272 psi @ 75 Degrees F and is designed for the following applications: air, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is chemical-resistant and is made of polyethylene. In addition, it has ⅜ inch OD, ¼ inch ID, with an inch system of measurement, with 0.06 inch wall thickness, and Shore D 45 hardness. This tubing is for use with water.

Tube en PTFE blanc 50 pi de long, certifié par la FDA/3A 20-27. Rayon de courbure de 1 po et épaisseur de paroi de 1/16 po. Diamètre intérieur de 1/8 po et diamètre extérieur de 1/4 po. La température de fonctionnement est de -150 °F à 500 °F, avec une pression maximale de 300 lb/po2. Il peut être utilisé dans les applications à base de substances chimiques, d'eau, de vapeur, d'air, d'aliments, de haute température, de haute pression, d'huile et de carburant. Ce tube prése

Tube en PTFE blanc 50 pi de long, certifié par la FDA/3A 20-27. Rayon de courbure de 1 po et épaisseur de paroi de 1/16 po. Diamètre intérieur de 1/8 po et diamètre extérieur de 1/4 po. La température de fonctionnement est de -150 °F à 500 °F, avec une pression maximale de 300 lb/po2. Il peut être utilisé dans les applications à base de substances chimiques, d'eau, de vapeur, d'air, d'aliments, de haute température, de haute pression, d'huile et de carburant. Ce tube prése

Tube en PTFE blanc 2 pi de long, certifié par la FDA/3A 20-27. Rayon de courbure de 2 po et une épaisseur de paroi de 1/32 po. Le diamètre intérieur est de 3/16 po et le diamètre extérieur est de 1/4 po. La température de fonctionnement est de -150 °F à 500 °F, avec une pression maximale de 140 lb/po2. Il peut être utilisé dans les applications à base d'air, de produits chimiques, d'aliments et de boissons, de pétrole, de carburant, de vapeur et d'eau. Ce tube présente une

Tube en PTFE blanc 2 pi de long, certifié par la FDA/3A 20-27. Rayon de courbure de 2 po et une épaisseur de paroi de 1/32 po. Le diamètre intérieur est de 3/16 po et le diamètre extérieur est de 1/4 po. La température de fonctionnement est de -150 °F à 500 °F, avec une pression maximale de 140 lb/po2. Il peut être utilisé dans les applications à base d'air, de produits chimiques, d'aliments et de boissons, de pétrole, de carburant, de vapeur et d'eau. Ce tube présente une

This tubing meets the standards for NSF 51, 61, FDA, has a 100-foot length, a maximum operating pressure of 260 psi @ 75 Degrees F and is designed for the following applications: air, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is chemical-resistant and is made of polyethylene. In addition, it has ¼ inch OD, 3/16 inch ID, with an inch system of measurement, with 0.05 inch wall thickness, and Shore D 45 hardness. This tubing is for use with water.

This tubing meets the standards for NSF 51, 61, FDA, has a 100-foot length, a maximum operating pressure of 260 psi @ 75 Degrees F and is designed for the following applications: air, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is chemical-resistant and is made of polyethylene. In addition, it has ¼ inch OD, 3/16 inch ID, with an inch system of measurement, with 0.05 inch wall thickness, and Shore D 45 hardness. This tubing is for use with water.

This tubing meets the standards for NSF 51, 61, FDA, has a length of 100 feet, a maximum operating pressure of 123 psi @ 75 Degrees F and is designed for the following applications: air, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is chemical-resistant and is made of polyethylene. In addition, it has ¾ inch OD,⅝ inch ID, with an inch system of measurement, with 0.06 inch wall thickness, and Shore D 45 hardness. This tubing is for use with water.

This tubing meets the standards for NSF 51, 61, FDA, has a length of 100 feet, a maximum operating pressure of 123 psi @ 75 Degrees F and is designed for the following applications: air, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is chemical-resistant and is made of polyethylene. In addition, it has ¾ inch OD,⅝ inch ID, with an inch system of measurement, with 0.06 inch wall thickness, and Shore D 45 hardness. This tubing is for use with water.