Abrasives
Sanding Discs and Kits
Flap Discs
Close

Filter Results By

Search within these results

Shop By

Clearance (2)
Grainger Brands and Products (16)
New (2)

In Stock Now (402)

Brand

3M 3M (62)
APPROVED VENDOR APPROVED VENDOR (9)
BOSCH BOSCH (2)
CGW ABRASIVES CGW ABRASIVES (148)
DEWALT DEWALT (19)
FLEXOVIT FLEXOVIT (37)
KLINGSPOR (52)

MERIT (4)

NORTON (279)

PFERD (21)

TYROLIT (97)

UNITED ABRASIVES (32)

UNITED ABRASIVES-SAIT (81)

WALTER SURFACE TECHNOLOGIES (136)

WALTER SURFACE TECHNOLOGIES INC. (3)

WESTWARD (7)
View more View less

Price

Under $10 Under $10 (72)
$10 - $15 $10 - $15 (277)
$15 - $20 $15 - $20 (219)
$20 - $25 $20 - $25 (149)
$25 - $30 $25 - $30 (87)
$30 - $35 $30 - $35 (58)
$35 - $40 (64)

$40 - $50 (42)

$50 - $60 (7)

$60 - $70 (4)

$80 - $90 (1)

$100 - $200 (5)

$200 - $300 (4)
View more View less

Item

Abrasive Finishing Disc Abrasive Finishing Disc (1)
Abrasive Finishing Kit Abrasive Finishing Kit (1)
Abrasive Flap Disc Abrasive Flap Disc (20)
Abrasive Sanding Wheels Abrasive Sanding Wheels (1)
Arbor Mount Flap Disc Arbor Mount Flap Disc (52)
Conditioning Disc Conditioning Disc (3)
Conical Disc (32)

Conical Flap Disc (1)

Deburring Replacement Blade (2)

Depressed Center Wheel (3)

Extra Cut Polishing Compound (1)

Finishing Disc (2)

Finishing Flap Disc (2)

Flap Disc (840)

Flap Disc,4.5x5/8-11,T27,Z3,Reg,60G (1)

Flap Disc,4.5x5/8-11,T29,Z3,Reg,60G (1)

Flexible Flap Disc (4)

Mini Flap Disc (1)

Sanding Disc (5)

Surface Conditioning Disc (3)

Wire Wheel Brush (1)
View more View less

Abrasive Material

Alumina Zirconia Alumina Zirconia (16)
Aluminum Oxide Aluminum Oxide (101)
Ceramic Ceramic (211)
Ceramic Alumina Ceramic Alumina (7)
Ceramic Alumina/Zirconia Alumina Ceramic Alumina/Zirconia Alumina (4)
Ceramic Blend Ceramic Blend (1)
Ceramic Grain (6)

Non Woven Surface Conditioning (3)

Non-Woven (3)

Precision Shaped Ceramic (11)

Zirconia (1)

Zirconia Alumina (463)

Zirconia Alumina/Aluminum Oxide (4)

Zirconia Grain (37)

Zirconium (41)
View more View less

Abrasive Type

Coated Coated (587)
Flap Disc Flap Disc (21)
Non-Woven Non-Woven (18)
Open Coat Open Coat (11)
Resin Resin (1)

Series

3M(TM) Flap Disc 769F 3M(TM) Flap Disc 769F (11)
769F 769F (23)
811 811 (1)
967A 967A (19)
A3 A3 (4)
ALLSTEEL ALLSTEEL (15)
Basic (3)

Best (1)

Blaze R980P (29)

Blaze R980p (1)

BlueFire R860 (13)

BlueFire R884P (9)

Bluefire (63)

Bluefire R884p (26)

C-Trim (1)

C3 Ceramic (4)

C3 Ceramic Thickness Xl (6)

C3 Trimmable (1)

CMT 726, Convex Design (4)

CMT 728, Flat Design (2)

CMT 730 Multibond, Convex Design (3)

CMT 800, Convex Design (3)

Cerabond (3)

CerabondX (36)

Charger (1)

Cubitron (TM) II (9)

Curve 9/16" (4)

EF TURBO (1)

ENDURO-FLEX(TM) (4)

ENDURO-FLEX(TM) TURBO (1)

Encore Ceramic (8)

Enduro Flex (24)

Enduro-Flex 2-in-1 TURBO (2)

Enduro-Flex 2-in-1(TM) (1)

Enduro-Flex Stainless(TM) (36)

Enduro-Flex Turbo(TM) (4)

Extra Heavy Duty (2)

FX (2)

FX(TM) Stainless (1)

Fastcut 2-in-1 (6)

FlexOvit(R) ZIRCOMAX(R) 5" X 7/8" 60 Grit TYPE 29 Flap Disc,12000 (1)

FlexOvit(R) ZIRCOTEX(R) 4" X 5/8" 40 Grit Type 29 Flap Disc,15000 (1)

FlexOvit(R) ZIRCOTEX(R) 4" X 5/8" 80 Grit Type 29 Flap Disc,15000 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 5/8"-11 120 Grit Type 27 SPIN-ON Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 5/8"-11 40 Grit Type 29 SPIN-ON Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 7/8" 120 Grit TYPE 29 Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 7/8" 24 Grit Type 29 Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 7/8" 40 Grit Type 29 Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 7/8" 60 Grit Type 29 Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 4-1/2" X 7/8" 80 Grit Type 29 Flap Disc,13300 (1)

FlexOvit(R) ZIRCOTEX(R) 5" X 7/8" 120 Grit Type 29 Flap Disc,12000 (1)

FlexOvit(R) ZIRCOTEX(R) 5" X 7/8" 24 Grit Type 29 Flap Disc,12000 (1)

FlexOvit(R) ZIRCOTEX(R) 5" X 7/8" 40 Grit Type 29 Flap Disc,12000 (1)

FlexOvit(R) ZIRCOTEX(R) 5" X 7/8" 60 Grit Type 29 Flap Disc,12000 (1)

FlexOvit(R) ZIRCOTEX(R) 5" X 7/8" 80 Grit Type 29 Flap Disc,12000 (1)

FlexOvit(R) ZIRCOTEX(R) 6" X 7/8" 120 Grit Type 29 Flap Disc,10000 (1)

FlexOvit(R) ZIRCOTEX(R) 6" X 7/8" 80 Grit Type 27 Flap Disc,10000 (1)

FlexOvit(R) ZIRCOTEX(R) 7" X 7/8" 120 Grit Type 29 Flap Disc,8600 (1)

FlexOvit(R) ZIRCOTEX(R) 7" X 7/8" 40 Grit TYPE 29 Flap Disc,8600 (1)

FlexOvit(R) ZIRCOTEX(R) 7" X 7/8" 60 Grit TYPE 29 Flap Disc,8600 (1)

FlexOvit(R) ZIRCOTEX(R) 7" X 7/8" 80 Grit Type 29 Flap Disc,8600 (1)

Good (1)

HD-MAX (6)

Heavy Duty (3)

High Performance (19)

INSTANT POLISH(TM) (2)

Interleaf (9)

Merit Aluminum Backed (1)

Merit High Density (2)

Metal R828 (11)

Neon (35)

Neon High Density (15)

Ovation (40)

Ovation Attacker (32)

Ovation Ceramic (8)

Premium (24)

Premium A3 (2)

Premium Non-Ferrous (1)

Premium Regular Thickness (2)

Premium Z-Stainless Regular Thickness (1)

Premium Z-Stainless Xl Thickness (5)

Premium Z3 (15)

Premium Z3 Thickness XL (3)

Premium Z3 Thickness Xl (17)

Q711T (4)

Quick-Step(TM) Flex (8)

R822 (3)

Redheat (9)

SG Blaze (28)

SG Blaze(R) (18)

SGP CURVE 5/8" Thickness (7)

SGP CURVE 9/16" Thickness (8)

SMT 325 (6)

SMT 624 Supra (18)

SMT 636 Supra (5)

SMT 926 (4)

Sgp Curve 5/8" Thickness (1)

Spinlock(TM) (8)

Spinlock(TM) Flap Discs (3)

Spinlock(TM) Surface Conditioning Disc (3)

Standard Density (1)

Trimback (24)

Trimmable Flap Disc (15)

Twist (3)

ULTIMATE SHINE(TM) (1)

Vortex Rapid Prep (8)

WSM 617 (6)

Westward (1)

X-LOCK (2)

XB1186 (2)

XC1176 (7)

Z3 Double/xxl (8)

Z3 Trimmable (6)

Z3 Xl (1)

Z3 Zirconia (26)

Z3(R) Mini (1)

Zpce Economy (6)

Zpce Economy Xl (2)
View more View less

Flap Discs

https://catalogue.grainger.ca/?hybris=true

989 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

3M
FLAPDISC,T29,5X7/840+YFWEIGHT,10/C
Item # MMM86716
Mfr. Model # 86716

EHC: EHC :

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $16.74 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
ENDURO-FLEX TYPE 27 5" GRIT 40
Item # WLT15R504
Mfr. Model # 15R504

EHC: EHC :

Flexsteel flap disc has a 7/8 inch threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/finishing cost and reducing downtime.

Flexsteel flap disc has a 7/8 inch threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/finishing cost and reducing downtime.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $30.21 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
ENDURO-FLEX TYPE 27 4 1/2" GRIT 60
Item # WLT15R456
Mfr. Model # 15R456

EHC: EHC :

Enduro-Flex stainless flap disc. Remove welds and finish surfaces in one step. For use on steel and stainless steel. 4-1/2in diameter, 7/8 arbor, 60 grit, 13,300 RPM.

Enduro-Flex stainless flap disc. Remove welds and finish surfaces in one step. For use on steel and stainless steel. 4-1/2in diameter, 7/8 arbor, 60 grit, 13,300 RPM.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $25.63 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
6IN GR40 ENDURO-FLEX
Item # WLT06B604
Mfr. Model # 06B604

EHC: EHC :

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $35.02 / EACH

EHC: EHC :

Qty:

Compare

FLAP SANDING DISC, RESIN-BOND, TYPE 29, 80 GRIT, 5 X 7/8 IN/ XL THICK, Z3 ZIRC/AL GRAIN/POLY

CGW ABRASIVES
FLAP SANDING DISC, RESIN-BOND, TYPE 29, 80 GRIT, 5 X 7/8 IN/ XL THICK, Z3 ZIRC/AL GRAIN/POLY
Item # CGW42565
Mfr. Model # 42565

EHC: EHC :

This series Type 29 resin-bond flap sanding disc measures 5 x 7/8 inches. It features a maximum RPM of 12,000, 80 grit, and blend of Z3 zirconia and aluminum grains. This disc with heat-treated polyester backing has an active grinding cool-cutting agent, extra-large thickness, and is designed for aggressive use on carbon steel applications.

This series Type 29 resin-bond flap sanding disc measures 5 x 7/8 inches. It features a maximum RPM of 12,000, 80 grit, and blend of Z3 zirconia and aluminum grains. This disc with heat-treated polyester backing has an active grinding cool-cutting agent, extra-large thickness, and is designed for aggressive use on carbon steel applications.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1365

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $13.36 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
FLAPDISC ENDURO-FLEX 4.5"X5/8"-11" GR40
Item # WLT06B454
Mfr. Model # 06B454

EHC: EHC :

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $25.11 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
FLAPDISC ENDURO-FLEX 4.5"X5/8"-11" GR60
Item # WLT06B456
Mfr. Model # 06B456

EHC: EHC :

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $25.11 / EACH

EHC: EHC :

Qty:

Compare

3M
FLAP DISC,GRIT 40,5" DISK DIA.
Item # MMM7100104600
Mfr. Model # AB89844

EHC: EHC :

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1370

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $20.19 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
FLAPDISC ENDURO-FLEX 4.5"X5/8"-11" GR80
Item # WLT06B458
Mfr. Model # 06B458

EHC: EHC :

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $25.11 / EACH

EHC: EHC :

Qty:

Compare

FLAP SANDING DISC, PREM ZA60,, 60 GRIT, 5 X 7/8 IN, ZIRC/ALINA

TYROLIT
FLAP SANDING DISC, PREM ZA60,, 60 GRIT, 5 X 7/8 IN, ZIRC/ALINA
Item # TYT680380
Mfr. Model # 680380

EHC: EHC :

This series Premium ZA60 flap sanding disc measures 5 x 7/8 inches, has 60 grit zirconia alumina abrasive grain, and a maximum RPM of 12,200. This disc features long-life durability and a trimmable backing. Designed for use on steel and stainless steel.

This series Premium ZA60 flap sanding disc measures 5 x 7/8 inches, has 60 grit zirconia alumina abrasive grain, and a maximum RPM of 12,200. This disc features long-life durability and a trimmable backing. Designed for use on steel and stainless steel.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1365

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $15.52 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
5IN GR40 ENDURO-FLEX
Item # WLT06B504
Mfr. Model # 06B504

EHC: EHC :

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $31.20 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
ENDURO-FLEX TYPE 27 5" GRIT 60
Item # WLT15R506
Mfr. Model # 15R506

EHC: EHC :

Flexsteel flap disc has a 7/8 inch threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/finishing cost and reducing downtime.

Flexsteel flap disc has a 7/8 inch threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/finishing cost and reducing downtime.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $30.21 / EACH

EHC: EHC :

Qty:

Compare

FLAP SANDING DISC, COARSE, 40 GRIT, RED, 6 IN X 5/8

CGW ABRASIVES
FLAP SANDING DISC, COARSE, 40 GRIT, RED, 6 IN X 5/8"-11, C3 CERAMIC, CTN POLY
Item # CGW30222
Mfr. Model # 30222

EHC: EHC :

This contaminant-free red trimmable flap sanding disc measures 6 inches x 5/8"-11 thread hub size. It features a maximum RPM of 10,200, 40 grit, and C3 ceramic for aggressive cutting action. This coarse-grade disc with cotton-polyester backing has self-sharpening ceramic grain and cool-grinding aid. Ideal for hard-to-grind materials including steel and other heat-sensitive materials.

This contaminant-free red trimmable flap sanding disc measures 6 inches x 5/8"-11 thread hub size. It features a maximum RPM of 10,200, 40 grit, and C3 ceramic for aggressive cutting action. This coarse-grade disc with cotton-polyester backing has self-sharpening ceramic grain and cool-grinding aid. Ideal for hard-to-grind materials including steel and other heat-sensitive materials.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1369

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $25.00 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
ENDURO-FLEX STAINLESSTYPE27 4.5" GR40
Item # WLT15Q454
Mfr. Model # 15Q454

EHC: EHC :

Enduro-Flex stainless flap disc with the eco-trim backing. Iron, sulphur and chlorine free. Remove welds and finish surfaces in one step. Eco-trim backing is made from natural plant fibers and can be trimmed as necessary. 4-1/2 inches diameter, 7/8 inch arbor, 40 grit, 13,300 RPM.

Enduro-Flex stainless flap disc with the eco-trim backing. Iron, sulphur and chlorine free. Remove welds and finish surfaces in one step. Eco-trim backing is made from natural plant fibers and can be trimmed as necessary. 4-1/2 inches diameter, 7/8 inch arbor, 40 grit, 13,300 RPM.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $26.95 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
FLAPDISC ENDURO-FLEX STAINLESS 5" GR60
Item # WLT06F506
Mfr. Model # 06F506

EHC: EHC :

Enduro-Flex for stainless steel with 5/8 inch-11 threaded hub has a superior performance on all heat sensitive metals. Consistent finish without any discoloration and may also be used on carbon steel and non-ferrous metals.

Enduro-Flex for stainless steel with 5/8 inch-11 threaded hub has a superior performance on all heat sensitive metals. Consistent finish without any discoloration and may also be used on carbon steel and non-ferrous metals.

View more View less
- SDS SDS
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $37.81 / EACH

EHC: EHC :

Qty:

Compare

WALTER SURFACE TECHNOLOGIES
5IN GR80 ENDURO-FLEX
Item # WLT06B508
Mfr. Model # 06B508

EHC: EHC :

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1373

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $31.20 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Search within these results

Flap Discs

989 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty