Skip to Content Skip to Navigation
!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.
Filter

Filter Results By

Applied Filters
Clear All

Search within these results

GO
Shop By
Brand
Price
  • View more View less
Measurement System
Milling Dia.
  • View more View less
Number of Flutes
Primary Material Application
Shank Dia.
  • View more View less
Length of Cut
  • View more View less
End Mill Cutting Type
List Number
  • View more View less
Helix Angle
Overall Length
  • View more View less

Finishing Cobalt Square End Mills

Finishing cobalt square end mills create a finer finish on the workpiece than roughing cobalt square end mills. Cobalt square end mills can be used at higher speeds and are harder and more wear-resistant than high-speed steel square end mills. Sometimes called square-nose end mills, square end mills have a square nose and are rotated against a piece of stock to create a flat-bottomed groove with 90° inside corners in milling tasks. They are used for counterboring, side and face milling, and milling square shoulders.

https://catalogue.grainger.ca/?hybris=true

94 Results Found

In stock at branch(0)
Branch #
Change
Find a Branch
Results per page :  16 | 32 | 48
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ½ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ½ IN MILLING DIA
  • Item # OSG5200700
  • Mfr. Model # 5200700
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 2½ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $58.31 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 6 FLUTES, 1¼ IN MILLING DIA, HSS
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 6 FLUTES, 1¼ IN MILLING DIA, HSS
  • Item # OSG5404400
  • Mfr. Model # 5404400
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon 7/8 inch diameter shank. This square end mill is designed for use with steel and is for finishing and non-centre cutting. It also has right hand cutting direction, along with six flutes and a 4¼ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $221.00 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, 1 IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, 1 IN MILLING DIA
  • Item # OSG5203300
  • Mfr. Model # 5203300
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/4 inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 3¾ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $153.20 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, 17/32 IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, 17/32 IN MILLING DIA
  • Item # OSG5401600
  • Mfr. Model # 5401600
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This square end mill is designed for use with steel and is for finishing and non-centre cutting. It also has right hand cutting direction, along with four flutes and 3⅜ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $86.78 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ¾ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ¾ IN MILLING DIA
  • Item # OSG5202300
  • Mfr. Model # 5202300
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 5/8 inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 3 7/16 inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $106.30 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 6 FLUTES, 1½ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 6 FLUTES, 1½ IN MILLING DIA
  • Item # OSG5416600
  • Mfr. Model # 5416600
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon 1¼ inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with six flutes and a 4½ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $328.43 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, 1 IN MILLING DIAMETER
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, 1 IN MILLING DIAMETER
  • Item # OSG5403300
  • Mfr. Model # 5403300
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/4 inch diameter shank. This square end mill is designed for use with steel and is for finishing and non-centre cutting. It also has right hand cutting direction, along with four flutes and 4⅛ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $150.77 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 4 FLUTES, 1¼ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 4 FLUTES, 1¼ IN MILLING DIA
  • Item # OSG5416100
  • Mfr. Model # 5416100
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon 1¼ inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with four flutes and 4½ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $291.74 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, 5MM MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, 5MM MILLING DIA
  • Item # OSG5800300
  • Mfr. Model # 5800300
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon 9.52 mm diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 58.70 mm length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $44.22 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ¾ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ¾ IN MILLING DIA
  • Item # OSG5201500
  • Mfr. Model # 5201500
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 3 5/16 inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $107.97 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ¾ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 2 FLUTES, ¾ IN MILLING DIA
  • Item # OSG5203100
  • Mfr. Model # 5203100
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/4 inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 3 9/16 inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $107.44 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, 7/16 IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, 7/16 IN MILLING DIA
  • Item # OSG5400600
  • Mfr. Model # 5400600
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This square end mill is designed for use with steel and is for finishing and non-centre cutting. It also has right hand cutting direction, along with four flutes and 2 11/16 inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $61.56 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED, CENTRE CUTTING, 2 FLUTES, 17/32 IN MILLING DIAMETER
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED, CENTRE CUTTING, 2 FLUTES, 17/32 IN MILLING DIAMETER
  • Item # OSG5201600
  • Mfr. Model # 5201600
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with two flutes and 3⅛ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $81.79 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, ⅜ IN MILLING DIAMETER
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED, NON-CENTRE CUTTING, 4 FLUTES, ⅜ IN MILLING DIAMETER
  • Item # OSG5450500
  • Mfr. Model # 5450500
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This square end mill is designed for use with steel and is for finishing and non-centre cutting. It also has right hand cutting direction, along with four flutes and 3¼ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $54.70 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 6 FLUTES, 1⅛ IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 6 FLUTES, 1⅛ IN MILLING DIA
  • Item # OSG5415600
  • Mfr. Model # 5415600
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat one inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with six flutes and a 4½ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $236.31 / EACH

EHC: EHC :
SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 4 FLUTES, 1 IN MILLING DIA
  • OSG
  • SQUARE END MILL, BRIGHT/UNCOATED FINISH, CENTRE CUTTING, 4 FLUTES, 1 IN MILLING DIA
  • Item # OSG5415100
  • Mfr. Model # 5415100
  • EHC: EHC :

  • This general purpose grade square end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat one inch diameter shank. This square end mill is designed for use with steel and is for finishing and centre cutting. It also has right hand cutting direction, along with four flutes and 4½ inch length.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $182.54 / EACH

EHC: EHC :
Results per page :  16 | 32 | 48

Add to Order List

X

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list