Extension Taps

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 4/9 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 4/9 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.

This ELPTT-TN pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.

This ELPTT-TN pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.

This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.

This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 27/64 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3½ inch length, plus it has four flutes.

This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.

This ELPTT-TN pipe tap is made of high speed steel and has a 0.48 inch diameter, 2 43/64 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT-TN series pipe tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 3¾ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter along with a three-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅜ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.48 inch diameter along with a three-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅜ inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3½ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 5¼ inch length. Plus it has five flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3½ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 5¼ inch length. Plus it has five flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.318 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a three-inch length, plus it has four flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅝ inch length. Plus it has five flutes.

This ELPTT pipe tap is made of high speed steel and has a 0.8 inch diameter, 3¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI Table 311. This ELPTT series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 4⅝ inch length. Plus it has five flutes.