Epoxy Structural Adhesives

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 25 mL Devtube.

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 25 mL Devtube.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

This Permatex clear gap-filling epoxy adhesive has a 50-minute functional cure, a full cure in 24 hours, and a temperature range of -60 to 180℉. The cartridge includes a syringe and 25 millilitres of adhesive. This adhesive has 3400 PSI, a 1:1 mix ratio, and is designed as a hardener.

This Permatex clear gap-filling epoxy adhesive has a 50-minute functional cure, a full cure in 24 hours, and a temperature range of -60 to 180℉. The cartridge includes a syringe and 25 millilitres of adhesive. This adhesive has 3400 PSI, a 1:1 mix ratio, and is designed as a hardener.

This PC-superepoxy epoxy adhesive is clear and comes in a syringe. It meets the standards for ASTM C413, ASTM C580, ASTM D1002, ASTM D2240, ASTM D648, ASTM D695, ASTM D792. This epoxy adhesive features impact resistant. In addition, it is for use with multi-surface and it has a working time of 15 minutes.

This PC-superepoxy epoxy adhesive is clear and comes in a syringe. It meets the standards for ASTM C413, ASTM C580, ASTM D1002, ASTM D2240, ASTM D648, ASTM D695, ASTM D792. This epoxy adhesive features impact resistant. In addition, it is for use with multi-surface and it has a working time of 15 minutes.

Gorilla epoxy is a two-part epoxy with gap-filling capabilities and an all-purpose formula that easily bonds steel, wood, aluminum, and ceramic. This epoxy takes five minutes to set, is water- and solvent-resistant, and impact-tough. It comes in a 25-millilitre bottle and is clear.

Gorilla epoxy is a two-part epoxy with gap-filling capabilities and an all-purpose formula that easily bonds steel, wood, aluminum, and ceramic. This epoxy takes five minutes to set, is water- and solvent-resistant, and impact-tough. It comes in a 25-millilitre bottle and is clear.

2-Ton(R) epoxy is an extremely strong, water-resistant adhesive. Bonds with ferrous and non-ferrous metals, ceramics, wood, concrete or glass. Medium cure time, water-resistant, non-shrinking, 25 mL Devtube.

2-Ton(R) epoxy is an extremely strong, water-resistant adhesive. Bonds with ferrous and non-ferrous metals, ceramics, wood, concrete or glass. Medium cure time, water-resistant, non-shrinking, 25 mL Devtube.

5-minute epoxy gel is a fast-curing, thixotropic, non-migrating adhesive, designed for filling gaps and for bonding rough as well as smooth surfaces. High tensile strength (2500 PSI). Good solvent resistance. Ideal for vertical surfaces, 25 mL Devtube.

5-minute epoxy gel is a fast-curing, thixotropic, non-migrating adhesive, designed for filling gaps and for bonding rough as well as smooth surfaces. High tensile strength (2500 PSI). Good solvent resistance. Ideal for vertical surfaces, 25 mL Devtube.

J-B Weld KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 230 Degrees F.

J-B Weld KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 230 Degrees F.

This clear, eight-ounce cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

This clear, eight-ounce cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

J-B Weld ClearWeld Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

J-B Weld ClearWeld Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

This 10 minute epoxy adhesive is black and comes in a cartridge. It meets the standards for ASTM. This epoxy adhesive features bonds dissimilar substrates, excellent chemical resistance to oils, fuels, good peel and impact resistance, high shear strength, hydrocarbons, rapid fixturing in 20 minutes, self levelling liquid for encapsulating components. In addition, it has a working time of 10 minutes.

This 10 minute epoxy adhesive is black and comes in a cartridge. It meets the standards for ASTM. This epoxy adhesive features bonds dissimilar substrates, excellent chemical resistance to oils, fuels, good peel and impact resistance, high shear strength, hydrocarbons, rapid fixturing in 20 minutes, self levelling liquid for encapsulating components. In addition, it has a working time of 10 minutes.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.