Product ITEM is unavailable. See products from the same category below.
Engineering & Drilling Hammers
Engineering and drilling hammers drive stakes, strike chisels, place gears and pins, and perform light demolition. Also known as club hammers, they are smaller versions of sledge hammers with a lighter head and a shorter handle. The broad face on each end of the head provides a large striking area. These baby or mini sledges are swung with one hand to strike more accurately but with less force than a two-hand sledge.
This engineer's hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This engineer's hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 1½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 1½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series engineer's hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long, is black/yellow. It features industrial grade heads, mould injected protective covering over handle and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series engineer's hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long, is black/yellow. It features industrial grade heads, mould injected protective covering over handle and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 2½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a 2½-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME B107.54. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face drilling hammer has a length of 14 inch with a two-pound head weight. The fibreglass handle is 14 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face drilling hammer has a length of 14 inch with a two-pound head weight. The fibreglass handle is 14 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This engineer's hammer has a length of 14 inch with a three-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This engineer's hammer has a length of 14 inch with a three-pound head weight. The fibreglass handle is 14 inch long and is yellow. It features high strength handle, shock absorbing and meets the standards for ASME. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a ribbed grip.
This Ergo-Power series soft face drilling hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face drilling hammer has a length of 14 inch with a four-pound head weight. The fibreglass handle is 14 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a four-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Classic Nuplaglas series engineer's hammer has a length of 12 inch with a four-pound head weight. The fibreglass handle is 12 inch long and is yellow. It features non-sparking and meets the standards for ASME. In addition, it is made of brass, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face drilling hammer has a length of 14 inch with a three-pound head weight. The fibreglass handle is 14 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This Ergo-Power series soft face drilling hammer has a length of 14 inch with a three-pound head weight. The fibreglass handle is 14 inch long, is black. It features Rockwell 30 rhc head and meets the standards for ASME B107.54. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a rubber ribbed grip.
This engineer's hammer has a length of 16 inch with a two-pound head weight. The fibreglass handle is 16 inch long, is black. It features high strength handle, shock absorbing. In addition, it is made of steel and is not tether ready with a ribbed grip.
This engineer's hammer has a length of 16 inch with a two-pound head weight. The fibreglass handle is 16 inch long, is black. It features high strength handle, shock absorbing. In addition, it is made of steel and is not tether ready with a ribbed grip.
This Ergo-Power series drilling hammer has a length of 10 inch with a four-pound head weight. The fibreglass handle is 10 inches long. It features mould injected protective covering over handle and meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, with a rubber ribbed grip.
This Ergo-Power series drilling hammer has a length of 10 inch with a four-pound head weight. The fibreglass handle is 10 inches long. It features mould injected protective covering over handle and meets the standards for ANSI. In addition, it is made of steel, plus it is non-sparking, with a rubber ribbed grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
