Disc Backup Pads

This disc pad with a hook-and-loop attachment style is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with pressure sensitive adhesive is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a six-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with pressure sensitive adhesive is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a six-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

Use this backing pad with a hook-and-loop attachment style to secure and support surface conditioning discs. It has a diameter of 4 1/2 inches and a 5/8"-11 back mounting thread size. This backing pad has a maximum revolutions per minute of 10,000. The pad includes 1/4 inch foam for medium stiffness and maximum grip.

Use this backing pad with a hook-and-loop attachment style to secure and support surface conditioning discs. It has a diameter of 4 1/2 inches and a 5/8"-11 back mounting thread size. This backing pad has a maximum revolutions per minute of 10,000. The pad includes 1/4 inch foam for medium stiffness and maximum grip.

Back-up pade for 2 inch roll on discs.

Back-up pade for 2 inch roll on discs.

Back-up pad for 3 inch roll-on discs.

Back-up pad for 3 inch roll-on discs.

Use this backing pad with a hook-and-loop attachment style to secure and support surface conditioning discs. It has a diameter of five inches and a 5/8"-11 back mounting thread size. This backing pad has a maximum revolutions per minute of 10,000. The pad includes 1/4 inch foam for medium stiffness and maximum grip.

Use this backing pad with a hook-and-loop attachment style to secure and support surface conditioning discs. It has a diameter of five inches and a 5/8"-11 back mounting thread size. This backing pad has a maximum revolutions per minute of 10,000. The pad includes 1/4 inch foam for medium stiffness and maximum grip.

This disc pad with pressure sensitive adhesive is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with pressure sensitive adhesive is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of five inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 12,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat surfaces. The pad with firm density is 1/4 of an inch thick and made for use with grits 100 and coarser. It has a diameter of five inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 12,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of five inches, a 5/16"-24 back mounting thread size, and a five-hole design. This disc pad has a maximum of 12,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of five inches, a 5/16"-24 back mounting thread size, and a five-hole design. This disc pad has a maximum of 12,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

Use this disc backup pad with standard spiral pattern for sanding, grinding, polishing, and surface preparation applications. For use with coarse grits, it has a diameter of seven inches and a back mounting thread size of 5/8"-11. The backup pad has a medium flexibility and includes spiral ribs that provide contact points and form channels for air flow, extending the life of the disc. The larger air holes offer a cooler operating area. This backup pad is made from rubber and is without a nut.

Use this disc backup pad with standard spiral pattern for sanding, grinding, polishing, and surface preparation applications. For use with coarse grits, it has a diameter of seven inches and a back mounting thread size of 5/8"-11. The backup pad has a medium flexibility and includes spiral ribs that provide contact points and form channels for air flow, extending the life of the disc. The larger air holes offer a cooler operating area. This backup pad is made from rubber and is without a nut.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

Use this disc backup pad with standard spiral pattern for sanding, grinding, polishing, and surface preparation applications. For use with coarse grits, it has a diameter of 4 1/2 inches and a back mounting thread size of 5/8"-11. The backup pad has a medium flexibility and includes spiral ribs that provide contact points and form channels for air flow, extending the life of the disc. The larger air holes offer a cooler operating area. This backup pad is made from rubber and is without a nut.

Use this disc backup pad with standard spiral pattern for sanding, grinding, polishing, and surface preparation applications. For use with coarse grits, it has a diameter of 4 1/2 inches and a back mounting thread size of 5/8"-11. The backup pad has a medium flexibility and includes spiral ribs that provide contact points and form channels for air flow, extending the life of the disc. The larger air holes offer a cooler operating area. This backup pad is made from rubber and is without a nut.

Use this disc backup pad with standard spiral pattern for sanding, grinding, polishing, and surface preparation applications. For use with coarse grits, it has a diameter of nine inches and a back mounting thread size of 5/8"-11. The backup pad has a medium flexibility and includes spiral ribs that provide contact points and form channels for air flow, extending the life of the disc. The larger air holes offer a cooler operating area. This backup pad is made from rubber and is without a nut.

Use this disc backup pad with standard spiral pattern for sanding, grinding, polishing, and surface preparation applications. For use with coarse grits, it has a diameter of nine inches and a back mounting thread size of 5/8"-11. The backup pad has a medium flexibility and includes spiral ribs that provide contact points and form channels for air flow, extending the life of the disc. The larger air holes offer a cooler operating area. This backup pad is made from rubber and is without a nut.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of five inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 12,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of five inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 12,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with pressure sensitive adhesive is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with pressure sensitive adhesive is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a no-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a six-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.

This disc pad with a hook-and-loop attachment style is designed for use on flat and curved surfaces. The medium density pad is 1/4 of an inch thick and made for use with 120 to 240 grits. It has a diameter of six inches, a 5/16"-24 back mounting thread size, and a six-hole design. This disc pad has a maximum of 10,000 revolutions per minute and features a heat-resistant hub. The hub, foam, and facing are all one molded unit. The body material of this disc pad is molded urethane.