Diamond Saw Blades

This TSD-S Dri Disc diamond saw blade has a 0.080 inch thickness and 4½ inches diameter. It has ⅝ and ⅞ inch arbour. The wet/dry cutting blade with continuous rim cuts concrete, masonry, brick, and stone of 1¼ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This TSD-S Dri Disc diamond saw blade has a 0.080 inch thickness and 4½ inches diameter. It has ⅝ and ⅞ inch arbour. The wet/dry cutting blade with continuous rim cuts concrete, masonry, brick, and stone of 1¼ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This segmented diamond saw blade has a 14-inch diameter and a one inch round arbour. It has a maximum speed of 5460 revolutions per minute that cuts concrete and masonry. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and table saws.

This segmented diamond saw blade has a 14-inch diameter and a one inch round arbour. It has a maximum speed of 5460 revolutions per minute that cuts concrete and masonry. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and table saws.

This TSD-S Dri Disc diamond saw blade has a 0.080 inch thickness and 4½ inches diameter. It has ⅝ and ⅞ inch arbour. The wet/dry cutting blade with a segmented rim cuts concrete, masonry, brick, and stone of 1¼ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This TSD-S Dri Disc diamond saw blade has a 0.080 inch thickness and 4½ inches diameter. It has ⅝ and ⅞ inch arbour. The wet/dry cutting blade with a segmented rim cuts concrete, masonry, brick, and stone of 1¼ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This premium diamond saw blade has a 4½ inches diameter with 0.075 inch blade thickness and a speed of 13200 RPM. It has a turbo rim and a ⅞ inch round arbour. The general-purpose wet/dry cutting blade cuts stone, concrete, and brick. It cuts up to 0.075 inch width and 1¼ inches depth.

This premium diamond saw blade has a 4½ inches diameter with 0.075 inch blade thickness and a speed of 13200 RPM. It has a turbo rim and a ⅞ inch round arbour. The general-purpose wet/dry cutting blade cuts stone, concrete, and brick. It cuts up to 0.075 inch width and 1¼ inches depth.

This TSD-S Dri Disc diamond saw blade has a 0.080 inch thickness and five inches diameter. It has ⅝ and ⅞ inch arbour. The wet/dry cutting blade with a segmented rim cuts concrete, masonry, brick, and stone of 1½ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This TSD-S Dri Disc diamond saw blade has a 0.080 inch thickness and five inches diameter. It has ⅝ and ⅞ inch arbour. The wet/dry cutting blade with a segmented rim cuts concrete, masonry, brick, and stone of 1½ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This segmented steel diamond saw blade has seven inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 8730 revolutions per minute that cuts green concrete, asphalt, and ductile iron. The wet/dry ductile iron blade is suitable for use with circular saws.

This segmented steel diamond saw blade has seven inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 8730 revolutions per minute that cuts green concrete, asphalt, and ductile iron. The wet/dry ductile iron blade is suitable for use with circular saws.

This premium diamond saw blade has a 4½ inches diameter with 0.079 inch plate thickness and a speed of 13200 RPM. It has a segmented rim and a ⅞ inch round arbour with a diamond knockout. The general-purpose wet/dry cutting blade cuts concrete/block/brick up to 0.079 inch width and 1¼ inches depth.

This premium diamond saw blade has a 4½ inches diameter with 0.079 inch plate thickness and a speed of 13200 RPM. It has a segmented rim and a ⅞ inch round arbour with a diamond knockout. The general-purpose wet/dry cutting blade cuts concrete/block/brick up to 0.079 inch width and 1¼ inches depth.

This Vari-Cut diamond saw blade measures 0.13 inch plate thickness and 16 inches diameter. It has a one-inch round arbour and a segmented rim of 0.125 inch width. The wet/dry cutting blade operates at a maximum power of 20 HP with a speed of 4725 RPM and has a maximum cutting depth of six inches that cuts concrete/tile.

This Vari-Cut diamond saw blade measures 0.13 inch plate thickness and 16 inches diameter. It has a one-inch round arbour and a segmented rim of 0.125 inch width. The wet/dry cutting blade operates at a maximum power of 20 HP with a speed of 4725 RPM and has a maximum cutting depth of six inches that cuts concrete/tile.

This universal turbo/segmented diamond saw blade is 14 inches in diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 5500 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.

This universal turbo/segmented diamond saw blade is 14 inches in diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 5500 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.

This premium diamond saw blade has a four-inch diameter with 0.063 inch plate thickness and a speed of 14500 RPM. It has a continuous rim and a ⅝ inch round arbour. The wet/dry cutting blade cuts ceramic, granite, and marble. It cuts up to 0.06 inch width and one inch depth. The blade is suitable for use with angle grinders/tile saws.

This premium diamond saw blade has a four-inch diameter with 0.063 inch plate thickness and a speed of 14500 RPM. It has a continuous rim and a ⅝ inch round arbour. The wet/dry cutting blade cuts ceramic, granite, and marble. It cuts up to 0.06 inch width and one inch depth. The blade is suitable for use with angle grinders/tile saws.

This segmented diamond saw blade has nine inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 6790 revolutions per minute that cuts concrete and masonry. The wet/dry general-purpose concrete blade is suitable for use with angle grinders and cut-off saws.

This segmented diamond saw blade has nine inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 6790 revolutions per minute that cuts concrete and masonry. The wet/dry general-purpose concrete blade is suitable for use with angle grinders and cut-off saws.

This premium diamond saw blade has a five inches diameter with 0.075 inch thickness and a speed of 13300 RPM. It has a turbo rim and a ⅞ inch round arbour. The wet/dry cutting blade cuts stone, concrete, and brick. It has up to 0.075 inch width and 1½ inches depth. The blade is suitable for use with angle grinders.

This premium diamond saw blade has a five inches diameter with 0.075 inch thickness and a speed of 13300 RPM. It has a turbo rim and a ⅞ inch round arbour. The wet/dry cutting blade cuts stone, concrete, and brick. It has up to 0.075 inch width and 1½ inches depth. The blade is suitable for use with angle grinders.

This diamond saw blade measures 0.14 inch plate thickness and 16 inches diameter. It has a one-inch round arbour and a segmented rim of 0.14 inch width. The wet/dry cutting blade operates at a power of 20 HP with a speed of 4725 RPM and has a maximum cutting depth of six inches that cuts asphalt. It is for use with power cutters and small flat saws.

This diamond saw blade measures 0.14 inch plate thickness and 16 inches diameter. It has a one-inch round arbour and a segmented rim of 0.14 inch width. The wet/dry cutting blade operates at a power of 20 HP with a speed of 4725 RPM and has a maximum cutting depth of six inches that cuts asphalt. It is for use with power cutters and small flat saws.

This Extreme Diamond Edge diamond saw blade made of steel is 14 inches in diameter with a 0.11 inch plate thickness and a maximum speed of 4300 revolutions per minute. It has a segmented rim, good grade, and one inch round arbour. The dry cutting blade cut ferrous metals up to five inches depth and is suitable for use with chop saws.

This Extreme Diamond Edge diamond saw blade made of steel is 14 inches in diameter with a 0.11 inch plate thickness and a maximum speed of 4300 revolutions per minute. It has a segmented rim, good grade, and one inch round arbour. The dry cutting blade cut ferrous metals up to five inches depth and is suitable for use with chop saws.

This XP diamond saw blade has a 4½ inches diameter with a 0.06 inch plate thickness and a maximum speed of 13300 revolutions per minute. It has a turbo rim, grade, and a ⅞ inch round arbour. The wet/dry cutting blade cuts masonry up to 1¼ inches depth and is suitable for use with angle grinders/masonry saws.

This XP diamond saw blade has a 4½ inches diameter with a 0.06 inch plate thickness and a maximum speed of 13300 revolutions per minute. It has a turbo rim, grade, and a ⅞ inch round arbour. The wet/dry cutting blade cuts masonry up to 1¼ inches depth and is suitable for use with angle grinders/masonry saws.

This universal turbo/segmented diamond saw blade has a nine inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 6790 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.

This universal turbo/segmented diamond saw blade has a nine inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 6790 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.