Crimp Hydraulic Hose Fittings with JIC Connection

This series 77U barbed hydraulic hose fitting is made of steel. It is rigid, male, crimped, and fits hose size 1 1/4 inches inside diameter. This high-pressure fitting delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is rigid, male, crimped, and fits hose size 1 1/4 inches inside diameter. This high-pressure fitting delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is crimped, female, and fits hose size one-inch inside diameter. This high-pressure swivel fitting has a 45 Degrees short-drop elbow. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is crimped, female, and fits hose size one-inch inside diameter. This high-pressure swivel fitting has a 45 Degrees short-drop elbow. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 48 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ¾"-14 thread. Plus, it has a 32 mm hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 48 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ¾"-14 thread. Plus, it has a 32 mm hex size.

This bulkhead union elbow meets the standards for SAE 070701. In addition, it is a union elbow, and has a ¾"-16 thread. Plus, it has a 1 inch hex size.

This bulkhead union elbow meets the standards for SAE 070701. In addition, it is a union elbow, and has a ¾"-16 thread. Plus, it has a 1 inch hex size.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ¾"-16 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ¾"-16 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 2.27 inches, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a a 1 1/16"-12 thread. Plus, it has a 1¼ inch hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 2.27 inches, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a a 1 1/16"-12 thread. Plus, it has a 1¼ inch hex size.

This adapter has a male Joint Industry Council (JIC) to male British Standard Pipe Parallel (BSPP) fitting.

This adapter has a male Joint Industry Council (JIC) to male British Standard Pipe Parallel (BSPP) fitting.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ⅞"-14 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ⅞"-14 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This permanent barbed hydraulic hose fitting is made of steel. This type JIC crimp-style coupling has a female 90 Degrees long drop elbow and is size 3/8 inches x 3/4"-16. It has a swivel tube fitting and is free of chomium-6.

This permanent barbed hydraulic hose fitting is made of steel. This type JIC crimp-style coupling has a female 90 Degrees long drop elbow and is size 3/8 inches x 3/4"-16. It has a swivel tube fitting and is free of chomium-6.

This series 77U barbed hydraulic hose fitting is made of steel. It is straight, female, crimped, and fits hose size 1 1/4 inches inside diameter. This high-pressure fitting has a swivel hose and a hex nut. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is straight, female, crimped, and fits hose size 1 1/4 inches inside diameter. This high-pressure fitting has a swivel hose and a hex nut. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 41.7 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, is made of steel, and has a M18x1.5 thread. Plus, it has a 24 mm hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 41.7 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, is made of steel, and has a M18x1.5 thread. Plus, it has a 24 mm hex size.

This series 77U barbed hydraulic hose fitting is made of steel. It is straight, female, crimped, and fits hose size 1 1/4 inches inside diameter. This high-pressure fitting has a swivel hose. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is straight, female, crimped, and fits hose size 1 1/4 inches inside diameter. This high-pressure fitting has a swivel hose. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

Connect different-sized thread fittings together with this male British Standard Pipe Parallel (BSPP) to male Joint Industry Council (JIC) adapter.

Connect different-sized thread fittings together with this male British Standard Pipe Parallel (BSPP) to male Joint Industry Council (JIC) adapter.

Permanent crimp hydraulic coupler, style 106BW (BW-FJ), female JIC 37 degree swivel, straight, 2 inches inside diameter hose to 2-1/2 inches-12 37 degree swivel female.

Permanent crimp hydraulic coupler, style 106BW (BW-FJ), female JIC 37 degree swivel, straight, 2 inches inside diameter hose to 2-1/2 inches-12 37 degree swivel female.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ⅞"-14 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ⅞"-14 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it is a 45 Degrees elbow, and has a ½"-14 thread. Plus, it has a 27 mm hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it is a 45 Degrees elbow, and has a ½"-14 thread. Plus, it has a 27 mm hex size.