Product ITEM is unavailable. See products from the same category below.
Corded Sanders
Rotary and random orbital disc sanders spin round sanding pads to remove material from large, flat surfaces. They accept abrasive discs that attach to the sanding pad. Rotary sanders move their pad in a circle for rapid stock removal and rough sanding before using a random orbital or sheet sander for smoothing and finishing. They provide the best results when sanding with the grain to avoid tearout. Random orbital sanders move their pad in a circle and whirl it in small oval orbits to minimize swirl marks and cross-grain scratches. They require only light pressure since the eccentric motion of the pad does most of the work. Random orbital sanders perform a range of sanding tasks, from paint stripping to finishing—depending on their orbit diameter, the grit of the abrasive disc, and the density of the backing pad.
This corded random orbital sander with a palm grip handle operates at 230V/3A. It has 12000 RPM, 12000 OPM, a 3/32-inch orbit diameter, and has 11-inch tool length. The single-speed sander with a rocker switch features a dust-sealed switch, five-inch hook-and-loop pad, and 4 feet 6-inch cord. It includes a dust bag.
This corded random orbital sander with a palm grip handle operates at 230V/3A. It has 12000 RPM, 12000 OPM, a 3/32-inch orbit diameter, and has 11-inch tool length. The single-speed sander with a rocker switch features a dust-sealed switch, five-inch hook-and-loop pad, and 4 feet 6-inch cord. It includes a dust bag.
This corded random orbital sander with a palm grip operates at 120V/3A. It has 12000 OPM, a ⅛ inch orbit diameter, and six-inch tool length. The single-speed sander with a slide switch features ball bearings, a 4¹ 3/16-inch pad, a ½-inch sandpaper sheet, and 6 feet 6-inch cord. It includes a dust bag and a hook-and-loop sand paper.
This corded random orbital sander with a palm grip operates at 120V/3A. It has 12000 OPM, a ⅛ inch orbit diameter, and six-inch tool length. The single-speed sander with a slide switch features ball bearings, a 4¹ 3/16-inch pad, a ½-inch sandpaper sheet, and 6 feet 6-inch cord. It includes a dust bag and a hook-and-loop sand paper.
This corded random orbit palm sander operates on a 3 Amp permanent magnet motor. It has a maximum wheel diameter of five-inch and a no-load speed ranging from 7000 to 12000 orbits per minute. The sander includes 80 grit sandpaper, a plastic dust canister, a universal VAC hose adapter, a hose adapter, and a contractor bag.
This corded random orbit palm sander operates on a 3 Amp permanent magnet motor. It has a maximum wheel diameter of five-inch and a no-load speed ranging from 7000 to 12000 orbits per minute. The sander includes 80 grit sandpaper, a plastic dust canister, a universal VAC hose adapter, a hose adapter, and a contractor bag.
This quick-step finisher operates at 120V/12A. It has no-load speed ranging from 2000 to 7000 RPM. The electronic speed finisher has a ⅝"-11 arbour, six-inch disc diameter, and a hook-and-loop disc attachment.
This quick-step finisher operates at 120V/12A. It has no-load speed ranging from 2000 to 7000 RPM. The electronic speed finisher has a ⅝"-11 arbour, six-inch disc diameter, and a hook-and-loop disc attachment.
This corded sheet palm sander operates at 3A. It has 14000 orbits per minute, 5½-inch length, 1/16-inch orbit diameter, and a 4¼ x 4 inches pad. The sander has a ¼ sandpaper sheet and features a universal vacuum hose adaptor, a plastic dust canister with a filter, and a button-style paper clamp system. It includes 100 and 150 grit sandpaper.
This corded sheet palm sander operates at 3A. It has 14000 orbits per minute, 5½-inch length, 1/16-inch orbit diameter, and a 4¼ x 4 inches pad. The sander has a ¼ sandpaper sheet and features a universal vacuum hose adaptor, a plastic dust canister with a filter, and a button-style paper clamp system. It includes 100 and 150 grit sandpaper.
This corded finishing sander with a pistol grip operates at 2.9A. It has 4000 to 10000 OPM and 11⅜-inch tool length. The variable-speed sander with a trigger switch features ball bearings, a 4½ x 9 inches pad, a ½-inch sandpaper sheet, and 8.2-inch of cord length. It meets CSA standard and includes an abrasive paper sheet and a plastic dust bag.
This corded finishing sander with a pistol grip operates at 2.9A. It has 4000 to 10000 OPM and 11⅜-inch tool length. The variable-speed sander with a trigger switch features ball bearings, a 4½ x 9 inches pad, a ½-inch sandpaper sheet, and 8.2-inch of cord length. It meets CSA standard and includes an abrasive paper sheet and a plastic dust bag.
This corded random orbital sander with a palm grip handle operates at 3A. It has 8000 to 12000 RPM, 8000 to 12000 OPM, a 3/32-inch orbit diameter, and 11-inch tool length. The variable-speed sander with a rocker switch features a ball bearing, five-inch hook-and-loop pad, and 4 feet 6-inch of cord length. It includes a dust bag and a carrying case.
This corded random orbital sander with a palm grip handle operates at 3A. It has 8000 to 12000 RPM, 8000 to 12000 OPM, a 3/32-inch orbit diameter, and 11-inch tool length. The variable-speed sander with a rocker switch features a ball bearing, five-inch hook-and-loop pad, and 4 feet 6-inch of cord length. It includes a dust bag and a carrying case.
This corded finishing sander with a pistol grip operates at 1.7A. It has 11000 OPM, 22000 strokes per minute, 1/16-inch orbit diameter, and 10-inch tool length. The single-speed sander with a trigger switch features ball bearings, a 3⅝ x 7¼ inches pad, and 6 feet 6-inch cord. It includes a dust bag, a punch plate, and a pad.
This corded finishing sander with a pistol grip operates at 1.7A. It has 11000 OPM, 22000 strokes per minute, 1/16-inch orbit diameter, and 10-inch tool length. The single-speed sander with a trigger switch features ball bearings, a 3⅝ x 7¼ inches pad, and 6 feet 6-inch cord. It includes a dust bag, a punch plate, and a pad.
This corded sander with a pam grip operates at 120V/2A. It has 14000 OPM, a 7/64 inch orbit diameter, and a 5½-inch tool length. The sander with a button switch features ball bearings, a 4⅜ x 4 inches pad, ¼ sandpaper sheet, and 6.6-foot cord. It includes an abrasive paper sheet of 60/100/150G, a dust bag, a punch plate, and a carrying case.
This corded sander with a pam grip operates at 120V/2A. It has 14000 OPM, a 7/64 inch orbit diameter, and a 5½-inch tool length. The sander with a button switch features ball bearings, a 4⅜ x 4 inches pad, ¼ sandpaper sheet, and 6.6-foot cord. It includes an abrasive paper sheet of 60/100/150G, a dust bag, a punch plate, and a carrying case.
This corded random orbital sander with a palm grip operates at 3A. It has 4000 to 12000 OPM, a ⅛ inch orbit diameter, and a 10⅞-inch tool length. The variable-speed sander with a trigger switch features ball bearings, a 4 3/16-inch pad, hook-and-loop sandpaper, and eight-foot cord. It includes a dust bag, dust nozzle, and tool case.
This corded random orbital sander with a palm grip operates at 3A. It has 4000 to 12000 OPM, a ⅛ inch orbit diameter, and a 10⅞-inch tool length. The variable-speed sander with a trigger switch features ball bearings, a 4 3/16-inch pad, hook-and-loop sandpaper, and eight-foot cord. It includes a dust bag, dust nozzle, and tool case.
This corded wheel sander with a pistol grip operates at 120V/7.8A. It has a no-load speed of 3500 RPM, 12¼ inches tool length, and has a 100 grit nylon brush wheel that measures 4¾ width x 4 inches diameter. The sander with a trigger switch features a ball bearing and 8.2-foot cord. It includes two hex wrenches.
This corded wheel sander with a pistol grip operates at 120V/7.8A. It has a no-load speed of 3500 RPM, 12¼ inches tool length, and has a 100 grit nylon brush wheel that measures 4¾ width x 4 inches diameter. The sander with a trigger switch features a ball bearing and 8.2-foot cord. It includes two hex wrenches.
This corded quick-step big buff polisher/sander operates at 12.4A. It has no-load speed ranging from 2000 to 7300 RPM. The variable-speed big buff polisher/sander with a push locking switch has a 4½-inch and six-inch pad. It includes one backing pad, one flap disc, and nine blendex discs.
This corded quick-step big buff polisher/sander operates at 12.4A. It has no-load speed ranging from 2000 to 7300 RPM. The variable-speed big buff polisher/sander with a push locking switch has a 4½-inch and six-inch pad. It includes one backing pad, one flap disc, and nine blendex discs.
This corded random orbital sander with a palm grip operates at 3A. It has 4000 to 12000 OPM, a ⅛ inch orbit diameter, and six-inch tool length. The variable-speed sander with a slide switch features ball bearings, a 4¹ 3/16-inch pad, hook-and-loop sandpaper, and 6 feet 6-inch cord. It includes a dust bag and a carrying case.
This corded random orbital sander with a palm grip operates at 3A. It has 4000 to 12000 OPM, a ⅛ inch orbit diameter, and six-inch tool length. The variable-speed sander with a slide switch features ball bearings, a 4¹ 3/16-inch pad, hook-and-loop sandpaper, and 6 feet 6-inch cord. It includes a dust bag and a carrying case.
This sander has dual orbit settings of ⅛-inch orbit for fine finishing and ¼-inch orbit for fast stock removal. It measures six inches and operates at 3.8 amperes. The sander features low vibration and auto-stop carbon brushes. It includes a front handle, paper dust bag, Velcro backing pad, backing pad change hex key, and an assortment of sanding discs.
This sander has dual orbit settings of ⅛-inch orbit for fine finishing and ¼-inch orbit for fast stock removal. It measures six inches and operates at 3.8 amperes. The sander features low vibration and auto-stop carbon brushes. It includes a front handle, paper dust bag, Velcro backing pad, backing pad change hex key, and an assortment of sanding discs.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
