Product ITEM is unavailable. See products from the same category below.
Cobalt Jobber-Length Drill Bits
Cobalt jobber-length drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a variety of materials.
This high-performance jobber length drill bit is made of cobalt and has a 23/64 inch diameter, 1⅜ inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅞ inch length. Plus it has two 3½ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This high-performance jobber length drill bit is made of cobalt and has a 23/64 inch diameter, 1⅜ inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅞ inch length. Plus it has two 3½ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This high-performance jobber length drill bit is made of cobalt and has a 15/32 inch diameter, 1 7/16 inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 5¾ inch length. Plus it has two 4 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.
This high-performance jobber length drill bit is made of cobalt and has a 15/32 inch diameter, 1 7/16 inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 5¾ inch length. Plus it has two 4 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.
This jobber length drill bit is made of cobalt and has a 7/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 61mm length. Plus it has one 33mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 7/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 61mm length. Plus it has one 33mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum and non-ferrous material, cast iron, steel, hardened steel, high-temperature alloy. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This high-performance jobber length drill bit is made of cobalt and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum and non-ferrous material, cast iron, steel, hardened steel, high-temperature alloy. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This high-performance jobber length drill bit is made of cobalt and has a 7/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has one 1½ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 7/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has one 1½ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has one 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has one 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has one 1⅜-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 43mm length. Plus it has one 20mm spiral flute, a straight shank, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 43mm length. Plus it has one 20mm spiral flute, a straight shank, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 61mm length. Plus it has one 33mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 3/32 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 61mm length. Plus it has one 33mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 9/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 75mm length. Plus it has one 43mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 9/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 75mm length. Plus it has one 43mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3½ inch length. Plus it has one 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3½ inch length. Plus it has one 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 5/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has one 1⅛ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 5/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has one 1⅛ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has one one-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has one one-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has one one-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has one one-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 1⅞ inch length. Plus it has one one-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 1⅞ inch length. Plus it has one one-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.