Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
Cobalt Jobber-Length Drill Bits
Close

Filter Results By

Applied Filters

Clear All

Brand
CLEVELAND

Search within these results

Shop By

In Stock Now (11)

Brand

BOSCH BOSCH (1)
CHICAGO-LATROBE CHICAGO-LATROBE (921)
CLARKSON-OSBORN CLARKSON-OSBORN (69)
CLE-LINE CLE-LINE (75)
CLEVELAND CLEVELAND (711)
DRILLCO DRILLCO (129)
JET (13)

OSG (45)

WALTER SURFACE TECHNOLOGIES (94)

WESTWARD (123)
View more View less

Price

Under $10 Under $10 (177)
$10 - $15 $10 - $15 (89)
$15 - $20 $15 - $20 (68)
$20 - $25 $20 - $25 (92)
$25 - $30 $25 - $30 (58)
$30 - $35 $30 - $35 (43)
$35 - $40 (37)

$40 - $50 (61)

$50 - $60 (24)

$60 - $70 (16)

$70 - $80 (10)

$80 - $90 (9)

$90 - $100 (9)

$100 - $200 (18)
View more View less

Drill Bit Size

#1 #1 (5)
#2 #2 (5)
#3 #3 (5)
#4 #4 (6)
#5 #5 (5)
#6 #6 (6)
#7 (6)

#8 (5)

#9 (5)

#10 (5)

#11 (5)

#12 (5)

#13 (6)

#14 (3)

#15 (6)

#16 (5)

#17 (5)

#18 (5)

#19 (5)

#20 (5)

#21 (6)

#22 (4)

#23 (5)

#24 (5)

#25 (5)

#26 (5)

#27 (5)

#28 (5)

#29 (6)

#30 (6)

#31 (4)

#32 (5)

#33 (5)

#34 (5)

#35 (5)

#36 (6)

#37 (5)

#38 (5)

#39 (6)

#40 (5)

#41 (6)

#42 (5)

#43 (6)

#44 (5)

#45 (5)

#46 (5)

#47 (4)

#48 (5)

#49 (4)

#50 (5)

#51 (5)

#52 (5)

#53 (2)

#54 (2)

#55 (2)

#56 (2)

#57 (2)

#58 (2)

#59 (1)

#60 (2)

#61 (1)

#62 (1)

#63 (1)

#64 (1)

#65 (1)

#66 (1)

#67 (1)

#68 (2)

#69 (1)

#70 (1)

#71 (1)

#72 (1)

#73 (1)

#74 (1)

#75 (1)

#76 (1)

#77 (1)

#78 (1)

#79 (1)

#80 (1)

1/64 in (1)

3/64 in (2)

1/16 in (6)

5/64 in (6)

3/32 in (6)

7/64 in (6)

1/8 in (5)

9/64 in (5)

5/32 in (5)

11/64 in (5)

3/16 in (6)

13/64 in (6)

7/32 in (6)

15/64 in (6)

1/4 in (6)

17/64 in (6)

9/32 in (6)

19/64 in (3)

5/16 in (6)

21/64 in (4)

11/32 in (6)

23/64 in (4)

3/8 in (6)

25/64 in (4)

13/32 in (4)

27/64 in (4)

7/16 in (6)

29/64 in (4)

15/32 in (4)

31/64 in (4)

1/2 in (6)

1.00 mm (1)

1.10 mm (1)

1.20 mm (1)

1.30 mm (1)

1.40 mm (1)

1.50 mm (4)

1.60 mm (3)

1.70 mm (1)

1.80 mm (1)

1.90 mm (1)

2.00 mm (4)

2.10 mm (1)

2.20 mm (1)

2.30 mm (1)

2.40 mm (1)

2.50 mm (4)

2.60 mm (1)

2.70 mm (1)

2.80 mm (1)

2.90 mm (3)

3.00 mm (4)

3.10 mm (1)

3.20 mm (1)

3.30 mm (3)

3.40 mm (1)

3.50 mm (4)

3.60 mm (1)

3.70 mm (1)

3.80 mm (1)

3.90 mm (1)

4.00 mm (3)

4.10 mm (1)

4.20 mm (3)

4.30 mm (1)

4.40 mm (1)

4.50 mm (4)

4.60 mm (1)

4.90 mm (1)

5.00 mm (4)

5.10 mm (1)

5.20 mm (1)

5.30 mm (1)

5.40 mm (1)

5.50 mm (4)

5.60 mm (1)

5.70 mm (1)

5.80 mm (1)

6.00 mm (4)

6.10 mm (1)

6.20 mm (1)

6.30 mm (1)

6.40 mm (1)

6.50 mm (4)

6.60 mm (1)

6.70 mm (1)

6.80 mm (3)

7.00 mm (5)

7.20 mm (1)

7.50 mm (1)

7.80 mm (1)

8.00 mm (4)

8.10 mm (1)

8.70 mm (1)

9.00 mm (4)

9.50 mm (1)

10.00 mm (4)

10.20 mm (2)

10.50 mm (1)

10.80 mm (1)

11.00 mm (4)

11.50 mm (1)

12.00 mm (4)

12.25 mm (1)

12.50 mm (3)

13.00 mm (3)

A (4)

B (4)

C (4)

D (4)

F (4)

G (4)

H (4)

I (5)

J (4)

K (4)

L (4)

M (4)

N (4)

O (4)

P (4)

Q (4)

R (4)

S (4)

T (4)

U (4)

V (4)

W (4)

X (4)

Y (4)

Z (4)
View more View less

Standards

ANSI ANSI (1)
ANSI ANSI (1)
ASME B94.11M ASME B94.11M (27)
ASME B94.11M ASME B94.11M (272)
ASME B94.11M, DIN 338 ASME B94.11M, DIN 338 (1)
ASME B94.11M-1993 ASME B94.11M-1993 (25)
DIN 338 (48)

NAS 907 Type D (1)

NAS 907 Type J (8)

NAS 907 Type J (204)

Not Rated (39)

Not Rated (76)
View more View less

Shank Type - Machining

Straight Straight (627)
Straight Straight (82)

Decimal Equivalent

0.0135 0.0135 (1)
0.0145 0.0145 (1)
0.0156 0.0156 (1)
0.016 0.016 (1)
0.018 0.018 (1)
0.02 0.02 (1)
0.021 (1)

0.0225 (1)

0.024 (1)

0.025 (1)

0.026 (1)

0.028 (1)

0.0292 (1)

0.031 (2)

0.032 (1)

0.033 (1)

0.035 (1)

0.036 (1)

0.037 (1)

0.038 (1)

0.039 (1)

0.0394 (1)

0.04 (2)

0.041 (2)

0.042 (2)

0.043 (2)

0.0433 (1)

0.0465 (2)

0.0469 (2)

0.0472 (1)

0.0512 (1)

0.052 (2)

0.055 (2)

0.0551 (1)

0.0591 (4)

0.0595 (1)

0.0625 (6)

0.063 (3)

0.0635 (5)

0.0669 (1)

0.067 (5)

0.07 (5)

0.0709 (1)

0.073 (4)

0.0748 (1)

0.076 (5)

0.0781 (6)

0.0785 (5)

0.0787 (4)

0.081 (5)

0.082 (5)

0.0827 (1)

0.086 (5)

0.0866 (1)

0.089 (6)

0.0906 (1)

0.0935 (5)

0.0938 (6)

0.0945 (1)

0.096 (6)

0.098 (5)

0.0984 (4)

0.0995 (6)

0.1015 (5)

0.1024 (1)

0.104 (5)

0.1063 (1)

0.1065 (6)

0.1094 (6)

0.11 (5)

0.1102 (1)

0.111 (5)

0.113 (5)

0.1142 (3)

0.116 (5)

0.1181 (4)

0.12 (5)

0.122 (1)

0.125 (5)

0.126 (1)

0.1285 (6)

0.1299 (3)

0.1339 (1)

0.136 (5)

0.1378 (4)

0.1405 (5)

0.1406 (5)

0.1417 (1)

0.144 (5)

0.1457 (1)

0.147 (5)

0.1495 (5)

0.1496 (1)

0.152 (5)

0.1535 (1)

0.154 (5)

0.1563 (5)

0.157 (4)

0.1575 (4)

0.159 (6)

0.161 (5)

0.1614 (1)

0.1654 (3)

0.166 (5)

0.1693 (1)

0.1695 (5)

0.1719 (5)

0.173 (5)

0.1732 (1)

0.177 (5)

0.1772 (4)

0.18 (6)

0.1811 (1)

0.182 (3)

0.185 (6)

0.1875 (6)

0.189 (6)

0.191 (5)

0.1929 (1)

0.1935 (4)

0.196 (5)

0.1969 (4)

0.199 (5)

0.2008 (1)

0.201 (6)

0.2031 (6)

0.204 (6)

0.2047 (1)

0.2055 (5)

0.2087 (1)

0.209 (6)

0.2126 (1)

0.213 (5)

0.2165 (4)

0.2188 (6)

0.2205 (1)

0.221 (5)

0.2244 (1)

0.228 (5)

0.2283 (1)

0.234 (4)

0.2344 (6)

0.2362 (4)

0.238 (4)

0.2402 (1)

0.242 (4)

0.2441 (1)

0.246 (4)

0.248 (1)

0.25 (6)

0.252 (1)

0.2559 (4)

0.257 (4)

0.2598 (1)

0.261 (4)

0.2638 (1)

0.2656 (6)

0.266 (4)

0.2677 (3)

0.272 (5)

0.2756 (5)

0.277 (4)

0.281 (4)

0.2813 (6)

0.2835 (1)

0.29 (4)

0.295 (4)

0.2953 (1)

0.2969 (3)

0.302 (4)

0.3071 (1)

0.3125 (6)

0.315 (4)

0.316 (4)

0.3189 (1)

0.323 (4)

0.3281 (4)

0.332 (4)

0.3346 (1)

0.339 (4)

0.3425 (1)

0.3438 (6)

0.348 (4)

0.3543 (4)

0.358 (4)

0.3594 (4)

0.368 (4)

0.374 (1)

0.375 (6)

0.377 (4)

0.386 (4)

0.3906 (4)

0.3937 (4)

0.397 (4)

0.4016 (2)

0.404 (4)

0.4063 (4)

0.413 (4)

0.4134 (1)

0.4219 (4)

0.4252 (1)

0.4331 (4)

0.4375 (6)

0.4528 (1)

0.4531 (4)

0.4688 (4)

0.4724 (4)

0.4844 (4)

0.4921 (3)

0.5 (6)

0.5118 (3)

0.4823 in (1)
View more View less

Flute Length

1/8 in 1/8 in (2)
3/16 in 3/16 in (4)
1/4 in 1/4 in (2)
5/16 in 5/16 in (2)
3/8 in 3/8 in (2)
1/2 in 1/2 in (9)
1/2 in (2)

5/8 in (6)

11/16 in (7)

3/4 in (9)

5/8 in (2)

11/16 in (4)

13/16 in (4)

7/8 in (15)

15/16 in (2)

13/16 in (3)

1 in (28)

1 1/16 in (3)

7/8 in (3)

15/16 in (1)

1 1/8 in (17)

1 in (3)

1 1/16 in (3)

1 3/16 in (2)

1 1/8 in (1)

1 1/4 in (17)

1 3/16 in (5)

1 5/16 in (2)

1 1/4 in (2)

1 3/8 in (18)

1 5/16 in (2)

1 7/16 in (14)

1 3/8 in (1)

1 1/2 in (21)

1 7/16 in (2)

1 9/16 in (3)

1 1/2 in (1)

1 5/8 in (15)

1 11/16 in (4)

1 9/16 in (1)

1 5/8 in (2)

1 3/4 in (14)

1 11/16 in (2)

1 13/16 in (1)

1 3/4 in (2)

1 7/8 in (13)

1 13/16 in (1)

1 15/16 in (3)

2 in (17)

1 7/8 in (2)

2 in (2)

2 1/8 in (19)

2 1/16 in (1)

2 3/16 in (16)

2 1/8 in (3)

2 3/16 in (1)

2 5/16 in (17)

2 1/4 in (1)

2 7/16 in (21)

2 1/2 in (21)

2 7/16 in (1)

2 5/8 in (15)

2 1/2 in (2)

2 3/4 in (13)

2 5/8 in (1)

2 7/8 in (19)

2 15/16 in (10)

2 3/4 in (1)

2 7/8 in (1)

2 15/16 in (1)

3 1/16 in (8)

3 3/16 in (8)

3 5/16 in (5)

3 5/16 in (1)

3 7/16 in (11)

3 1/2 in (8)

3 5/8 in (10)

3 1/2 in (1)

3 3/4 in (8)

3 5/8 in (1)

3 7/8 in (8)

3 15/16 in (2)

3 3/4 in (1)

3.9764 in (1)

3 7/8 in (1)

3 15/16 in (1)

4 1/16 in (4)

4 1/16 in (1)

4 3/16 in (2)

4 5/16 in (2)

4 3/16 in (1)

4 3/8 in (2)

4 1/2 in (4)

4 5/16 in (1)

4 3/8 in (1)

4 1/2 in (1)

12.00 mm (1)

14.00 mm (1)

16.00 mm (2)

18.00 mm (5)

20.00 mm (4)

22.00 mm (2)

24.00 mm (4)

27.00 mm (2)

24.00 mm (1)

30.00 mm (5)

30.00 mm (1)

33.00 mm (9)

36.00 mm (5)

39.00 mm (7)

43.00 mm (9)

47.00 mm (8)

43.00 mm (1)

52.00 mm (7)

52.00 mm (2)

57.00 mm (11)

57.00 mm (1)

63.00 mm (9)

63.00 mm (1)

69.00 mm (11)

75.00 mm (6)

81.00 mm (6)

87.00 mm (7)

94.00 mm (6)

101.00 mm (10)
View more View less

Drill Bit Point Angle

135 Degrees 135 Degrees (627)
135 Degrees 135 Degrees (82)

Shank Dia.

1/64 in 1/64 in (14)
1/32 in 1/32 in (18)
3/64 in 3/64 in (8)
1/16 in 1/16 in (35)
5/64 in 5/64 in (30)
3/32 in 3/32 in (40)
7/64 in (30)

1/8 in (28)

9/64 in (30)

5/32 in (26)

11/64 in (30)

3/16 in (43)

13/64 in (22)

7/32 in (20)

15/64 in (18)

1/4 in (20)

17/64 in (22)

9/32 in (8)

19/64 in (7)

5/16 in (17)

21/64 in (8)

11/32 in (14)

23/64 in (8)

3/8 in (18)

25/64 in (12)

13/32 in (4)

27/64 in (4)

7/16 in (10)

15/32 in (4)

0.4823 in (1)

31/64 in (4)

1/2 in (6)

1 3/32 in (1)

1 3/16 in (1)

1 19/64 in (1)

1 25/64 in (1)

1 1/2 in (4)

1 19/32 in (3)

1 11/16 in (1)

1 51/64 in (1)

1 57/64 in (1)

1 mm (1)

2 mm (4)

2.1 mm (1)

2.2 mm (1)

2.3 mm (1)

2.4 mm (1)

2.5 mm (4)

2.6 mm (1)

2.7 mm (1)

2.8 mm (1)

2.9 mm (3)

3 mm (4)

3.1 mm (1)

3.2 mm (1)

3.3 mm (3)

3.4 mm (1)

3.5 mm (4)

3.6 mm (1)

3.7 mm (1)

3.8 mm (1)

3.9 mm (1)

4 mm (4)

4.1 mm (1)

4.2 mm (3)

4.3 mm (1)

4.4 mm (1)

4.5 mm (4)

4.6 mm (1)

4.7 mm (1)

4.8 mm (1)

4.9 mm (1)

5 mm (4)

5.1 mm (1)

5.2 mm (1)

5.3 mm (1)

5.4 mm (1)

5.5 mm (4)

5.6 mm (1)

5.7 mm (1)

5.8 mm (1)

6 mm (4)

6.1 mm (1)

6.2 mm (1)

6.3 mm (1)

6.4 mm (1)

6.5 mm (3)

6.6 mm (1)

6.7 mm (1)

6.8 mm (4)

7 mm (5)

7.2 mm (1)

7.5 mm (1)

7.8 mm (1)

8 mm (4)

8.1 mm (1)

8.5 mm (1)

8.7 mm (1)

9 mm (4)

9.5 mm (1)

10 mm (4)

10.2 mm (2)

10.5 mm (1)

10.8 mm (1)

11 mm (4)

11.5 mm (1)

12 mm (4)

12.5 mm (3)

13 mm (3)
View more View less

Cutting Direction

Right Hand Right Hand (627)
Right Hand Right Hand (82)

Coolant Fed

Non-Coolant Through Non-Coolant Through (627)
Non-Coolant Through Non-Coolant Through (82)

Drill Bit Point Type

Split Point Split Point (627)
Split Point Split Point (82)

Measurement System

Fractional Inch Fractional Inch (105)
Fractional Inch Fractional Inch (50)
Letter Letter (99)
Metric Metric (136)
Wire Wire (287)
Letter Letter (2)
Metric (7)

Wire (23)
View more View less

Primary Material Application

Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium (64)
Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel (55)
Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium (22)
Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel (24)
Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel (204)
Aluminum, Brass, Bronze, Copper, Steel Aluminum, Brass, Bronze, Copper, Steel (51)
Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel (8)

Aluminum, Brass, Bronze, Copper, Steel (3)

Aluminum, Non-Ferrous Material (53)

Cast Iron, Nickel, Stainless Steel, Steel, Titanium (5)

Cast Iron, Nickel, Stainless Steel, Steel, Titanium (24)

Cast Iron, Stainless Steel (94)

Cast Iron, Stainless Steel (1)

Steel (101)
View more View less

Finish - Machining

Black Oxide Black Oxide (69)
Black Oxide Black Oxide (46)
Straw Straw (1)
Straw/Bronze Straw/Bronze (311)
TiAlN TiAlN (94)
TiCN TiCN (52)
TiN (100)

Straw/Bronze (33)

TiAlN (1)

TiCN (3)
View more View less

Overall Length

3/4 in 3/4 in (3)
7/8 in 7/8 in (3)
1 in 1 in (2)
1 1/8 in 1 1/8 in (2)
1 1/4 in 1 1/4 in (2)
1 3/8 in 1 3/8 in (5)
1 1/2 in (4)

1 5/8 in (1)

1 5/8 in (6)

1 3/4 in (1)

1 3/4 in (5)

1 7/8 in (2)

1 7/8 in (14)

2 in (5)

2 in (26)

2 1/8 in (15)

2 1/4 in (1)

2 1/4 in (16)

2 3/8 in (1)

2 3/8 in (17)

2 1/2 in (1)

2 1/2 in (15)

2 5/8 in (2)

2 5/8 in (19)

2 3/4 in (5)

2 3/4 in (16)

2 7/8 in (2)

2 7/8 in (14)

3 in (15)

3 1/8 in (2)

3 1/8 in (17)

3 1/4 in (4)

3 1/4 in (22)

3 3/8 in (1)

3 3/8 in (19)

3 1/2 in (21)

3 5/8 in (5)

3 5/8 in (21)

3 3/4 in (3)

3 3/4 in (25)

3 7/8 in (3)

3 7/8 in (17)

4 in (2)

4 in (16)

4 1/8 in (3)

4 1/8 in (23)

4 1/4 in (1)

4 1/4 in (13)

4 3/8 in (1)

4 3/8 in (10)

4 1/2 in (9)

4 5/8 in (2)

4 5/8 in (6)

4 3/4 in (1)

4 3/4 in (13)

4 7/8 in (2)

4 7/8 in (10)

5 in (3)

5 in (11)

5 1/8 in (2)

5 1/8 in (10)

5 1/4 in (1)

5 1/4 in (11)

5 3/8 in (2)

5 3/8 in (2)

5 1/2 in (2)

5 1/2 in (4)

5 5/8 in (2)

5 5/8 in (2)

5 3/4 in (2)

5 3/4 in (2)

5 7/8 in (2)

5 7/8 in (2)

5.945 in (1)

6 in (2)

6 in (4)

34.00 mm (1)

36.00 mm (1)

38.00 mm (2)

40.00 mm (5)

43.00 mm (4)

46.00 mm (2)

49.00 mm (1)

49.00 mm (4)

53.00 mm (2)

57.00 mm (1)

57.00 mm (5)

61.00 mm (9)

65.00 mm (5)

70.00 mm (7)

75.00 mm (9)

80.00 mm (8)

86.00 mm (2)

86.00 mm (7)

93.00 mm (1)

93.00 mm (11)

101.00 mm (1)

101.00 mm (9)

109.00 mm (11)

117.00 mm (6)

125.00 mm (6)

133.00 mm (7)

142.00 mm (6)

151.00 mm (10)
View more View less

Material - Machining

Cobalt Cobalt (627)
Cobalt Cobalt (83)

Flute Type

Parabolic Parabolic (353)
Spiral Spiral (274)
Parabolic Parabolic (28)
Spiral Spiral (54)

Cobalt Jobber-Length Drill Bits

Cobalt jobber-length drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a variety of materials.

https://catalogue.grainger.ca/?hybris=true

711 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH DRILL BIT, 23/64 IN DRILL BIT SIZE, 1¾ IN FLUTE L, 4⅞ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 23/64 IN DRILL BIT SIZE, 1¾ IN FLUTE L, 4⅞ IN L, COBALT
Item # GNF3780-15979
Mfr. Model # 3780-15979

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 23/64 inch diameter, 3⅛ inch long shank. It is for use with cast iron, nickel, steel, titanium. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅞ inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 23/64 inch diameter, 3⅛ inch long shank. It is for use with cast iron, nickel, steel, titanium. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅞ inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1274

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $28.79 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 25/64 IN DRILL BIT SIZE, 1⅞ IN FLUTE L, 5⅛ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 25/64 IN DRILL BIT SIZE, 1⅞ IN FLUTE L, 5⅛ IN L, COBALT
Item # GNF3780-15984
Mfr. Model # 3780-15984

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a ⅜ inch diameter, 3¼ inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a ⅜ inch diameter, 3¼ inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1274

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $30.35 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #30 DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN LENGTH, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, #30 DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN LENGTH, COBALT
Item # GNFC16532
Mfr. Model # C16532

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and steel. This 2075 series jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and steel. This 2075 series jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $14.88 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 27/64 IN DRILL BIT SIZE, 2 IN FLUTE L, 5⅜ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 27/64 IN DRILL BIT SIZE, 2 IN FLUTE L, 5⅜ IN L, COBALT
Item # GNF3780-15989
Mfr. Model # 3780-15989

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 27/64 inch diameter, 3⅜ inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 2 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 27/64 inch diameter, 3⅜ inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 2 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1274

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $36.79 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 6MM BIT SIZE, 57MM FLUTE L, 93MM OVERALL L, 4XD, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 6MM BIT SIZE, 57MM FLUTE L, 93MM OVERALL L, 4XD, COBALT
Item # GNF2213-70106
Mfr. Model # 2213-70106

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 6 mm diameter, 36 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 93mm length. Plus it has two 57mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 6 mm diameter, 36 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 93mm length. Plus it has two 57mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $9.97 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 5MM BIT SIZE, 52MM FLUTE L, 86MM OVERALL L, 4XD, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 5MM BIT SIZE, 52MM FLUTE L, 86MM OVERALL L, 4XD, COBALT
Item # GNF2213-70097
Mfr. Model # 2213-70097

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 5 mm diameter, 34 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has two 52mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 5 mm diameter, 34 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has two 52mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.38 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 2.5MM BIT SIZE, 3MM FLUTE L, 57MM OVERALL L, 4XD, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 2.5MM BIT SIZE, 3MM FLUTE L, 57MM OVERALL L, 4XD, COBALT
Item # GNF2213-70072
Mfr. Model # 2213-70072

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 2.5 mm diameter, 27 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 57mm length. Plus it has two 30mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 2.5 mm diameter, 27 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 57mm length. Plus it has two 30mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $5.05 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 2MM BIT SIZE, 24MM FLUTE L, 49MM OVERALL L, 4XD, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 2MM BIT SIZE, 24MM FLUTE L, 49MM OVERALL L, 4XD, COBALT
Item # GNF2213-70067
Mfr. Model # 2213-70067

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 2 mm diameter, 25 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 49mm length. Plus it has two 24mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 2 mm diameter, 25 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 49mm length. Plus it has two 24mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $5.03 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 7/16 IN DRILL BIT SIZE, 2-1/16 IN FLUTE L, 5½ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 7/16 IN DRILL BIT SIZE, 2-1/16 IN FLUTE L, 5½ IN L, COBALT
Item # GNF3780-15990
Mfr. Model # 3780-15990

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 7/16 inch diameter, 3 7/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5½ inch length. Plus it has two 2 1/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 7/16 inch diameter, 3 7/16 inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5½ inch length. Plus it has two 2 1/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1274

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $41.31 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 29/64 IN DRILL BIT SIZE, 2⅛ IN FLUTE L, 5⅝ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 29/64 IN DRILL BIT SIZE, 2⅛ IN FLUTE L, 5⅝ IN L, COBALT
Item # GNF3780-15991
Mfr. Model # 3780-15991

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 7/16 inch diameter, 3½ inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅝ inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 7/16 inch diameter, 3½ inch long shank. It is for use with cast iron, nickel, steel, titanium, and meets ASME standards. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅝ inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1274

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $45.08 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #5 DRILL BIT SIZE, 2½ IN FLUTE L, 3¾ IN LENGTH, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, #5 DRILL BIT SIZE, 2½ IN FLUTE L, 3¾ IN LENGTH, COBALT
Item # GNF2075C16507
Mfr. Model # 2075C16507

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 13/64 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and steel. This 2075 series jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2½ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 13/64 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and steel. This 2075 series jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2½ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $28.88 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 27/64 IN DRILL BIT SIZE, 3-15/16 IN FLUTE L, 5⅜ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 27/64 IN DRILL BIT SIZE, 3-15/16 IN FLUTE L, 5⅜ IN L, COBALT
Item # GNF2075C16578
Mfr. Model # 2075C16578

EHC: EHC :

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $59.13 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 9/64 IN DRILL BIT SIZE, 1¾ IN FLUTE L, 2⅞ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 9/64 IN DRILL BIT SIZE, 1¾ IN FLUTE L, 2⅞ IN L, COBALT
Item # GNF2075C16560
Mfr. Model # 2075C16560

EHC: EHC :

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $13.90 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 21/64 IN DRILL BIT SIZE, 3-5/16 IN FLUTE L, 4⅝ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 21/64 IN DRILL BIT SIZE, 3-5/16 IN FLUTE L, 4⅝ IN L, COBALT
Item # GNF2075C16572
Mfr. Model # 2075C16572

EHC: EHC :

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $38.83 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, 5¼ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, 5¼ IN L, COBALT
Item # GNF2075C16577
Mfr. Model # 2075C16577

EHC: EHC :

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

Wider parabolic flute style jobber length drill bit. 135 degree self centering point with modified notch.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $54.92 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 19/64 IN DRILL BIT SIZE, 1-9/16 IN FLUTE L, 4⅜ IN L, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 19/64 IN DRILL BIT SIZE, 1-9/16 IN FLUTE L, 4⅜ IN L, COBALT
Item # GNF3780-15968
Mfr. Model # 3780-15968

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 19/64 inch diameter, 2 13/16 inch long shank. It is for use with cast iron, nickel, steel, titanium. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅜ inch length. Plus it has two 1 9/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 19/64 inch diameter, 2 13/16 inch long shank. It is for use with cast iron, nickel, steel, titanium. This 3780 series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅜ inch length. Plus it has two 1 9/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1274

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $22.59 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Cobalt Jobber-Length Drill Bits

711 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Cobalt Jobber-Length Drill Bits

711 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All