Product ITEM is unavailable. See products from the same category below.
Chisels for Metal
Chisels for metal cut, chip, and shape metal workpieces and surfaces. They cut metals that are softer than the chisel material and make rough cuts that may need finishing if smooth edges or surfaces are required. Their striking head is hit with a hammer to drive the chisel's cutting edge into the metal. They are commonly used for blacksmithing and metalworking.
7/16 x 5-9/16 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
7/16 x 5-9/16 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
3/4 x 6-7/8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
3/4 x 6-7/8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
7/8 x 12 inch cold chisel. Designed to cut any cold metal softer than the chisel itself like cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
7/8 x 12 inch cold chisel. Designed to cut any cold metal softer than the chisel itself like cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
1 x 8-1/8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself like cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
1 x 8-1/8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself like cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
This cold chisel has a width of ¾ inch, and a length of 12 inch, plus it weighs 1.03 pounds. Along with a steel handle, it features hand ground cutting edge, modified parabolic striking end, polished identification panel and meets the standards for ASME B107.47M. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cold chisel is designed for: metal.
This cold chisel has a width of ¾ inch, and a length of 12 inch, plus it weighs 1.03 pounds. Along with a steel handle, it features hand ground cutting edge, modified parabolic striking end, polished identification panel and meets the standards for ASME B107.47M. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cold chisel is designed for: metal.
3/4 x 7 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
3/4 x 7 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
3/8 x 5-3/8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
3/8 x 5-3/8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
Made from S2 steel and specially heat-treated for greater strength and durability. Hand ground cutting edge to the exact angle for cutting through tough metals. 20% larger striking surface than standard chisels directs the power to the cutting edge.
Made from S2 steel and specially heat-treated for greater strength and durability. Hand ground cutting edge to the exact angle for cutting through tough metals. 20% larger striking surface than standard chisels directs the power to the cutting edge.
1/2 x 6 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
1/2 x 6 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
This cold chisel has a width of ⅝ inch, and a length of 6¾ inch, plus it weighs 0.37 pounds. Along with a steel handle, it features hand ground cutting edge, modified parabolic striking end, polished identification panel. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is tether ready with a plain grip. This cold chisel is designed for: metal.
This cold chisel has a width of ⅝ inch, and a length of 6¾ inch, plus it weighs 0.37 pounds. Along with a steel handle, it features hand ground cutting edge, modified parabolic striking end, polished identification panel. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is tether ready with a plain grip. This cold chisel is designed for: metal.
1 x 8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself like cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
1 x 8 inch cold chisel. Designed to cut any cold metal softer than the chisel itself like cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
7/16 x 5-9/16 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
7/16 x 5-9/16 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
This cold chisel has a width of ½ inch, and a length of 12 inch, plus it weighs 0.51 pounds. Along with a steel handle, it features hand ground cutting edge, modified parabolic striking end, polished identification panel and meets the standards for ASME B107.47M. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cold chisel is designed for: metal.
This cold chisel has a width of ½ inch, and a length of 12 inch, plus it weighs 0.51 pounds. Along with a steel handle, it features hand ground cutting edge, modified parabolic striking end, polished identification panel and meets the standards for ASME B107.47M. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cold chisel is designed for: metal.
5/8 x 6-3/4 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
5/8 x 6-3/4 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
1/4 x 5 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
1/4 x 5 inch cold chisel. Designed to cut any cold metal softer than the chisel itself such as cast iron, steel, brass, copper, aluminum, bolts, nuts and rivets. Modified parabolic struck end for greater resistance to mushrooming and chipping.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
