Product ITEM is unavailable. See products from the same category below.
Chisels for Metal
Chisels for metal cut, chip, and shape metal workpieces and surfaces. They cut metals that are softer than the chisel material and make rough cuts that may need finishing if smooth edges or surfaces are required. Their striking head is hit with a hammer to drive the chisel's cutting edge into the metal. They are commonly used for blacksmithing and metalworking.
This cold chisel has a width of ¾ inch, plus it weighs 0.6 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ¾ inch, plus it weighs 0.6 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cape chisel has a width of 3/16 inch, and a length of 5¾ inch, plus it weighs 0.15 pounds. Along with a steel handle, it features flat cutting end for precision, used to cut flat grooves for keyways or slots and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cape chisel is designed for: metal.
This cape chisel has a width of 3/16 inch, and a length of 5¾ inch, plus it weighs 0.15 pounds. Along with a steel handle, it features flat cutting end for precision, used to cut flat grooves for keyways or slots and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cape chisel is designed for: metal.
This cape chisel has a width of ¼ inch, and a length of 5¾ inch, plus it weighs 0.153 pounds. Along with a steel handle, it features flat cutting end for precision, used to cut flat grooves for keyways or slots and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cape chisel is designed for: metal.
This cape chisel has a width of ¼ inch, and a length of 5¾ inch, plus it weighs 0.153 pounds. Along with a steel handle, it features flat cutting end for precision, used to cut flat grooves for keyways or slots and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This cape chisel is designed for: metal.
This cold chisel has a width of ⅝ inch, and a length of 12 inch, plus it weighs 0.695 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ⅝ inch, and a length of 12 inch, plus it weighs 0.695 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ⅝ inch, and a length of 6½ inch, plus it weighs 0.36 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ⅝ inch, and a length of 6½ inch, plus it weighs 0.36 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This diamond point chisel has a width of ⅜ inch, plus it weighs 0.54 pounds. Along with a steel handle, it features bottom of the cut comes to a sharp point, used to make a v- shaped groove in metal and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This diamond point chisel is designed for: metal.
This diamond point chisel has a width of ⅜ inch, plus it weighs 0.54 pounds. Along with a steel handle, it features bottom of the cut comes to a sharp point, used to make a v- shaped groove in metal and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a plain grip. This diamond point chisel is designed for: metal.
This cold chisel has a width of ⅞ inch, and a length of 7½ inch, plus it weighs 0.6 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ⅞ inch, and a length of 7½ inch, plus it weighs 0.6 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ½ inch, plus it weighs 0.26 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ½ inch, plus it weighs 0.26 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ⅜ inch, and a length of 5½ inch, plus it weighs 0.119 pounds. It has a steel handle and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ⅜ inch, and a length of 5½ inch, plus it weighs 0.119 pounds. It has a steel handle and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of 1 inch, and a length of 12 inch, plus it weighs 1.53 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of 1 inch, and a length of 12 inch, plus it weighs 1.53 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ¼ inch, plus it weighs 1.75 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of ¼ inch, plus it weighs 1.75 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of 1 inch, plus it weighs 1.25 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
This cold chisel has a width of 1 inch, plus it weighs 1.25 pounds. Along with a steel handle, it features used to cut and shape metals softer and meets the standards for ASME B107.410-2008. In addition, it is made of steel, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready. This cold chisel is designed for: metal.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
