Bridge reamers are installed in a compatible power tool to enlarge, debur, and finish holes in structural materials to a specific size. The reamers have tapered flutes that ease the tool's entry into rough-cut or misaligned holes. Also called construction reamers, alignment reamers, and car reamers, they are designed for reaming difficult-to-machine materials such as iron and structural steel in metalworking applications where extreme precision is not required. Bridge reamers, car reamers, and alignment reamers are commonly used to ream rivet holes in parts for automobiles, bridges, rail cars, ships, and pressure vessels.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures four inches long and 1/2 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 5 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures four inches long and 1/2 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 5 7/8 inches.
This hex shank aligning reamer has an overall length of seven inches, a flute length of five inches, and a two inch hex. It is made of high-speed steel and has a diameter of 1 5/16 inches.
This hex shank aligning reamer has an overall length of seven inches, a flute length of five inches, and a two inch hex. It is made of high-speed steel and has a diameter of 1 5/16 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 2 3/4 inches long and 3/8 inch in diameter, with a straight shank for an overall length of 4 5/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 2 3/4 inches long and 3/8 inch in diameter, with a straight shank for an overall length of 4 5/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures four inches long and 9/16 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 5 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures four inches long and 9/16 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 5 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this steel reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 3/4 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this steel reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 3/4 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes, this aligning reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 4 1/2 inches long and 1 1/16 inch in diameter, with a 1/2-inch hex shank for an overall length of 6 1/2 inches.
Designed for accurate, final finishing jobs on drilled holes, this aligning reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 4 1/2 inches long and 1 1/16 inch in diameter, with a 1/2-inch hex shank for an overall length of 6 1/2 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 4 1/2 inches long and 11/16 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 3/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 4 1/2 inches long and 11/16 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 3/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 7/8 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 7/8 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 1 1/16 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 1 1/16 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes, this aligning reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 1 1/16 inch in diameter, with a 1 5/8-inch hex shank for an overall length of seven inches.
Designed for accurate, final finishing jobs on drilled holes, this aligning reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and 1 1/16 inch in diameter, with a 1 5/8-inch hex shank for an overall length of seven inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and one inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures five inches long and one inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 7/8 inches.
This bridge reamer is made of high speed steel. This bridge reamer has a bright (uncoated) and black finish. It has a 12 inch length. Plus it has straight flutes.
This bridge reamer is made of high speed steel. This bridge reamer has a bright (uncoated) and black finish. It has a 12 inch length. Plus it has straight flutes.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 4 1/2 inches long and 5/8 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 3/8 inches.
Designed for accurate, final finishing jobs on drilled holes for aligning, this hand reamer is made of high speed steel, constructed to fit in a tap wrench. The spiral flute measures 4 1/2 inches long and 5/8 inch in diameter, with a 1/2-inch diameter straight shank for an overall length of 6 3/8 inches.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
