Bench & Pedestal Grinder Wire Wheel Brushes

This crimped wire grinder wheel brush can be mounted with a 5/8"-11 threaded arbor and is made for use with bench and pedestal grinders. It has a diameter of four inches, a face width of 7/16 inches, and a wire diameter of 0.014 inches. This brush has a maximum RPM of 15,000.

This crimped wire grinder wheel brush can be mounted with a 5/8"-11 threaded arbor and is made for use with bench and pedestal grinders. It has a diameter of four inches, a face width of 7/16 inches, and a wire diameter of 0.014 inches. This brush has a maximum RPM of 15,000.

This radial, knotted wire, stringer bead wheel brush has a diameter of 4 7/8 inches and can be mounted with a 5/8"-11 threaded arbor. It has a face width of 3/16 inches, a one inch trim length, a wire diameter of 0.02 inches, and a one inch brush length. This stainless steel brush has a maximum RPM of 12,000 and is made for use with bench grinders, pedestal grinders, air tools, power drills, and electric tools.

This radial, knotted wire, stringer bead wheel brush has a diameter of 4 7/8 inches and can be mounted with a 5/8"-11 threaded arbor. It has a face width of 3/16 inches, a one inch trim length, a wire diameter of 0.02 inches, and a one inch brush length. This stainless steel brush has a maximum RPM of 12,000 and is made for use with bench grinders, pedestal grinders, air tools, power drills, and electric tools.

This crimped wire wheel brush can be arbor mounted and is made for use with bench and pedestal grinders. It has a diameter of six inches, a face width of 7/8 inches, a wire diameter of 0.014 inches. This carbon steel brush has a two inch arbor hole and a maximum RPM of 6,000.

This crimped wire wheel brush can be arbor mounted and is made for use with bench and pedestal grinders. It has a diameter of six inches, a face width of 7/8 inches, a wire diameter of 0.014 inches. This carbon steel brush has a two inch arbor hole and a maximum RPM of 6,000.

This radial knotted wire wheel brush has a diameter of six inches and can be mounted with a 5/8"-11 threaded arbor. It has a face width of 1/2 inches, a 1 1/2-inch trim length, a wire diameter of 0.014 inches, and a 1 1/2-inch brush length. This steel brush has a maximum RPM of 9,000 and is made for use with bench and pedestal grinders.

This radial knotted wire wheel brush has a diameter of six inches and can be mounted with a 5/8"-11 threaded arbor. It has a face width of 1/2 inches, a 1 1/2-inch trim length, a wire diameter of 0.014 inches, and a 1 1/2-inch brush length. This steel brush has a maximum RPM of 9,000 and is made for use with bench and pedestal grinders.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 20,000, a diameter of four inches, a face width of 5/16 inches, and a wire diameter of 0.02 inches. This brush is made for use with bench and pedestal grinders and can be mounted with a 5/8"-11 threaded arbor.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 20,000, a diameter of four inches, a face width of 5/16 inches, and a wire diameter of 0.02 inches. This brush is made for use with bench and pedestal grinders and can be mounted with a 5/8"-11 threaded arbor.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 12,000, a face width of 3/8 inches, a diameter of 6 1/2 inches, and a wire diameter of 0.026 inches. This brush is made for use with bench and pedestal grinders and can be arbor mounted.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 12,000, a face width of 3/8 inches, a diameter of 6 1/2 inches, and a wire diameter of 0.026 inches. This brush is made for use with bench and pedestal grinders and can be arbor mounted.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 9,000, a diameter of six inches, a face width of 1/2 inches, and a wire diameter of 0.026 inches. This brush is made for use with bench and pedestal grinders and can be arbor mounted.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 9,000, a diameter of six inches, a face width of 1/2 inches, and a wire diameter of 0.026 inches. This brush is made for use with bench and pedestal grinders and can be arbor mounted.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 9,000, a diameter of six inches, a face width of 1/2 inches, and a wire diameter of 0.016 inches. This brush is made for use with bench and pedestal grinders and can be mounted with a 5/8"-11 threaded arbor.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 9,000, a diameter of six inches, a face width of 1/2 inches, and a wire diameter of 0.016 inches. This brush is made for use with bench and pedestal grinders and can be mounted with a 5/8"-11 threaded arbor.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 9,000, a diameter of six inches, a face width of 1/2 inches, and a wire diameter of 0.016 inches. This brush is made for use with bench and pedestal grinders and can be arbor mounted.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 9,000, a diameter of six inches, a face width of 1/2 inches, and a wire diameter of 0.016 inches. This brush is made for use with bench and pedestal grinders and can be arbor mounted.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 8,500, a diameter of eight inches, a face width of 5/8 inches, and a wire diameter of 0.026 inches. This brush is made for use with bench and pedestal grinders and can be mounted with a threaded arbor.

This knotted wire wheel brush offers high flexibility, maximum safety, and efficient operation at high speeds. It has a maximum RPM of 8,500, a diameter of eight inches, a face width of 5/8 inches, and a wire diameter of 0.026 inches. This brush is made for use with bench and pedestal grinders and can be mounted with a threaded arbor.

This encapsulated twisted wire wheel brush has a diameter of 6 7/8 inches and can be mounted with a threaded arbor. It has a maximum RPM of 9,000, a face width of 1/4 inches, and a wire diameter of 0.02 inches. This stainless steel brush is made for use with bench and pedestal grinders.

This encapsulated twisted wire wheel brush has a diameter of 6 7/8 inches and can be mounted with a threaded arbor. It has a maximum RPM of 9,000, a face width of 1/4 inches, and a wire diameter of 0.02 inches. This stainless steel brush is made for use with bench and pedestal grinders.

This medium face crimped wire wheel brush can be arbor mounted and measures six inches in diameter. It has a maximum RPM of 6,000, a two inch arbor hole, a face width of 7/8 inches, and a wire diameter of 0.014 inches. This stainless steel brush is made for use with bench and pedestal grinders.

This medium face crimped wire wheel brush can be arbor mounted and measures six inches in diameter. It has a maximum RPM of 6,000, a two inch arbor hole, a face width of 7/8 inches, and a wire diameter of 0.014 inches. This stainless steel brush is made for use with bench and pedestal grinders.

This wide face crimped wire wheel brush provides superior cutting action and maximum fatigue resistance. It can be arbor mounted and measures 12 inches in diameter. It has a maximum RPM of 3,000, a face width of two inches, and a wire diameter of 0.02 inches. This carbon steel brush is made for use with bench and pedestal grinders.

This wide face crimped wire wheel brush provides superior cutting action and maximum fatigue resistance. It can be arbor mounted and measures 12 inches in diameter. It has a maximum RPM of 3,000, a face width of two inches, and a wire diameter of 0.02 inches. This carbon steel brush is made for use with bench and pedestal grinders.

This carbon crimped wire brush provides outstanding cutting action and maximum fatigue resistance. It can be arbor mounted and has a maximum RPM of 20,000. It has a diameter of two inches, a 1/4-inch face width, and a wire diameter of 0.014 inches. This brush is made for use with bench and pedestal grinders, power drills, air tools, and electric tools.

This carbon crimped wire brush provides outstanding cutting action and maximum fatigue resistance. It can be arbor mounted and has a maximum RPM of 20,000. It has a diameter of two inches, a 1/4-inch face width, and a wire diameter of 0.014 inches. This brush is made for use with bench and pedestal grinders, power drills, air tools, and electric tools.

This medium crimped wire wheel brush has a diameter of seven inches and can be arbor mounted. It has a maximum RPM of 6,000, a face width of 3/4 inches, and a wire diameter of 0.014 inches. This brush includes 1/2-inch and 5/8-inch adapters and is made for use with bench and pedestal grinders.

This medium crimped wire wheel brush has a diameter of seven inches and can be arbor mounted. It has a maximum RPM of 6,000, a face width of 3/4 inches, and a wire diameter of 0.014 inches. This brush includes 1/2-inch and 5/8-inch adapters and is made for use with bench and pedestal grinders.

This medium face crimped wire wheel brush can be arbor mounted and measures eight inches in diameter. It has a maximum RPM of 4,500, a two inch arbor hole, a face width of 7/8 inches, and a wire diameter of 0.008 inches. This stainless steel brush is made for use with bench and pedestal grinders.

This medium face crimped wire wheel brush can be arbor mounted and measures eight inches in diameter. It has a maximum RPM of 4,500, a two inch arbor hole, a face width of 7/8 inches, and a wire diameter of 0.008 inches. This stainless steel brush is made for use with bench and pedestal grinders.