Machining
Milling
End Mills
Ball End Mills
Close

Filter Results By

Search within these results

Product Categories

Carbide Ball End Mills (398)
Cobalt Ball End Mills (84)
High-Speed Steel Ball End Mills (88)
Holding Ball End Mills (45)

Shop By

In Stock Now (15)

Brand

BASSETT BASSETT (23)
CLARKSON-OSBORN CLARKSON-OSBORN (89)
CLEVELAND CLEVELAND (354)
OSG OSG (102)
SOWA SOWA (45)
WIDIA PRODUCTS GROUP WIDIA PRODUCTS GROUP (2)

Measurement System

Fractional Fractional (75)
Fractional Inch Fractional Inch (445)
Metric Metric (47)

Milling Dia.

0.125 in 0.125 in (27)
0.1406 in 0.1406 in (4)
0.1562 in 0.1562 in (6)
0.1719 in 0.1719 in (4)
0.1875 in 0.1875 in (25)
0.2031 in 0.2031 in (4)
0.2188 in (4)

0.2344 in (4)

0.25 in (38)

0.2656 in (4)

0.2812 in (4)

0.3125 in (24)

0.3594 in (2)

0.375 in (36)

0.3906 in (2)

0.4219 in (2)

0.4375 in (20)

0.4844 in (2)

0.5 in (37)

0.5625 in (6)

0.625 in (23)

0.75 in (31)

0.8125 in (3)

0.875 in (13)

1 1/2 in (2)

1 1/4 in (3)

1 in (35)

1.25 in (4)

1/16 in (2)

1/2 in (17)

1/3 in (2)

1/4 in (15)

1/5 in (3)

1/6 in (1)

1/8 in (7)

10 mm (5)

11 mm (2)

11/16 in (3)

11/32 in (2)

11/64 in (2)

12 mm (3)

13/32 in (2)

13/64 in (2)

14 mm (3)

16 mm (2)

18 mm (3)

2/9 in (1)

20 mm (2)

22 mm (2)

25 mm (2)

28 mm (1)

3.5 mm (2)

3/16 in (7)

3/32 in (1)

3/4 in (8)

3/8 in (11)

4 mm (4)

4.5 mm (2)

4/9 in (2)

5 mm (2)

5/16 in (9)

5/32 in (4)

5/8 in (10)

6 mm (5)

7 mm (2)

7/16 in (3)

7/32 in (2)

7/8 in (8)

8 mm (4)

9 mm (1)

9/16 in (4)

9/32 in (2)

9/64 in (2)
View more View less

Number of Flutes

2 2 (274)
3 3 (8)
4 4 (283)
5 5 (3)
6 6 (2)

End Mill Style

Ball End Ball End (62)
Ball Nose Ball Nose (458)
Square Square (1)

Primary Material Application

All Materials All Materials (44)
Aluminum, Brass, Bronze, Copper, Magnesium Aluminum, Brass, Bronze, Copper, Magnesium (116)
Aluminum, Brass, Bronze, Copper, Steel Aluminum, Brass, Bronze, Copper, Steel (1)
Aluminum, Cast Iron, Die Steel, Hardened Steel, Stainless Steel, Steel, Tool Steel Aluminum, Cast Iron, Die Steel, Hardened Steel, Stainless Steel, Steel, Tool Steel (27)
Aluminum, Cast Iron, Die Steel, Hardened Steel, Steel, Tool Steel Aluminum, Cast Iron, Die Steel, Hardened Steel, Steel, Tool Steel (69)
Cast Iron, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium Cast Iron, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium (1)
Cast Iron, Steel (150)

General Purpose (1)

Hardened Steel, Nickel, Stainless Steel, Steel, Titanium (12)

Stainless Steel, Steel (15)

Steel (16)
View more View less

Shank Dia.

0.1875 in 0.1875 in (1)
0.2500 in 0.2500 in (1)
1 1/4 in 1 1/4 in (4)
1 in 1 in (37)
1/2 in 1/2 in (70)
1/4 in 1/4 in (55)
1/8 in (30)

10 mm (7)

11 mm (2)

12 mm (4)

14 mm (2)

16 mm (3)

18 mm (2)

20 mm (2)

22 mm (2)

25 mm (3)

3/16 in (47)

3/4 in (50)

3/8 in (105)

4 mm (5)

5 mm (4)

5/16 in (35)

5/8 in (35)

6 mm (6)

7/16 in (29)

7/8 in (18)

8 mm (5)

9/16 in (6)
View more View less

Material - Machining

Carbide Carbide (389)
Cobalt Cobalt (84)
High Speed Steel High Speed Steel (83)

Finish - Machining

AP/MAX AP/MAX (11)
AP/MAX Coated AP/MAX Coated (10)
Bright (Uncoated) Bright (Uncoated) (366)
TiAlN TiAlN (128)
TiCN TiCN (31)
TiN TiN (23)

Length of Cut

0.5625 in 0.5625 in (1)
1 1/16 in 1 1/16 in (1)
1 1/2 in 1 1/2 in (47)
1 1/4 in 1 1/4 in (23)
1 1/8 in 1 1/8 in (29)
1 11/16 in 1 11/16 in (1)
1 3/4 in (8)

1 3/8 in (6)

1 5/16 in (4)

1 5/8 in (21)

1 7/8 in (1)

1 in (60)

1/2 in (31)

1/4 in (4)

11 mm (1)

12 mm (2)

13 mm (1)

13/16 in (7)

14 mm (5)

16 mm (2)

19 mm (7)

2 1/2 in (2)

2 1/4 in (28)

2 3/16 in (1)

2 in (26)

2/3 in (2)

20 mm (1)

21 mm (2)

22 mm (3)

23/32 in (1)

25 mm (6)

26 mm (1)

27/32 in (1)

3 in (29)

3/16 in (3)

3/4 in (56)

3/8 in (16)

30 mm (2)

32 mm (3)

35 mm (2)

38 mm (6)

4 in (4)

4/5 in (2)

4/7 in (1)

4/9 in (4)

45 mm (3)

5/16 in (6)

5/8 in (54)

7/16 in (3)

7/8 in (25)

9/16 in (15)
View more View less

End Mill Cutting Type

Centre Cutting Centre Cutting (525)
Non-Centre Cutting Non-Centre Cutting (16)

List Number

402BN 402BN (42)
404BN 404BN (45)
462BN 462BN (3)
464BN 464BN (5)
484BN 484BN (1)
4AN1 4AN1 (1)
4V00 (1)

521 (6)

CEM-SE-2B (54)

CEM-SE-2B-TA (54)

CEM-SE-4B (61)

CEM-SE-4B-TA (61)

CEM-V-4B (11)

CEM-V-4B-TA (11)

HG-2B (17)

HG-2B-TC (10)

HG-2B-TN (13)

HG-4B (17)

HG-4B-TC (6)

HG-4B-TN (9)

HGC-2B (8)

HGC-2B-TC (8)

HGC-4B (7)

HGC-4B-TC (7)

MSE-V-4B (11)

MSE-V-4B-TA (10)
View more View less

Helix Angle

30 Degrees 30 Degrees (434)
37 Degrees 37 Degrees (1)
38 Degrees 38 Degrees (44)

Overall Length

1 1/2 in 1 1/2 in (5)
1 7/8 in 1 7/8 in (1)
1.5 in 1.5 in (14)
102 mm 102 mm (8)
121 mm 121 mm (1)
2 1/16 in 2 1/16 in (2)
2 1/2 in (15)

2 11/16 in (1)

2 11/32 in (1)

2 27/32 in (1)

2 3/16 in (1)

2 3/4 in (1)

2 3/8 in (3)

2 5/16 in (5)

2 5/8 in (2)

2 7/16 in (1)

2 7/32 in (1)

2 9/16 in (1)

2 in (53)

2.2 in (2)

2.25 in (4)

2.3 in (2)

2.3125 in (7)

2.375 in (7)

2.4 in (1)

2.4375 in (10)

2.5 in (100)

2.7 in (4)

3 1/16 in (1)

3 1/2 in (4)

3 1/32 in (2)

3 1/4 in (1)

3 1/8 in (3)

3 15/16 in (1)

3 3/4 in (5)

3 3/8 in (1)

3 7/16 in (3)

3 7/8 in (1)

3 in (56)

3.0625 in (1)

3.25 in (13)

3.375 in (4)

3.5 in (14)

3.5625 in (3)

3.625 in (1)

3.75 in (3)

3.875 in (12)

4 1/2 in (2)

4 1/4 in (1)

4 1/8 in (4)

4 25/32 in (1)

4 3/4 in (1)

4 in (59)

4.25 in (6)

4.5 in (7)

4.75 in (4)

5 in (21)

5.25 in (2)

50 mm (2)

51 mm (8)

55 mm (1)

57 mm (1)

6 1/4 in (1)

6 7/16 in (2)

6 in (36)

6.25 in (1)

6.5 in (1)

63 mm (1)

64 mm (7)

68.50 mm (1)

69 mm (1)

70 mm (5)

72 mm (1)

76 mm (2)

83 mm (1)

89 mm (4)

92 mm (1)

95 mm (2)
View more View less

Material Grade - Machining

General Purpose General Purpose (373)
High Performance High Performance (83)
M42 M42 (41)
TiAlN-LT TiAlN-LT (1)

Miniature End Mill

No No (485)
Yes Yes (4)

Shank Type - Machining

Round Round (16)
Straight Straight (373)
Threaded Threaded (24)
Weldon Flat Weldon Flat (156)

Ball End Mills

Ball end mills have a rounded nose and create a round-bottomed groove in milling tasks. Also known as ball-nose end mills, they are rotated against a workpiece to make round-bottomed slots and pockets or mill complex shapes without sharp corners. Each end mill has flutes on its cutting head that carry chips away from the workpiece to prevent damage to the end mill or workpiece. End mills are used on CNC or manual milling machines.

Carbide Ball End Mills (398)

Cobalt Ball End Mills (84)

High-Speed Steel Ball End Mills (88)

Holding Ball End Mills (45)

https://catalogue.grainger.ca/?hybris=true

615 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

BALL END MILL, 4 FLUTES, 0.5 IN MILLING DIAMETER, ⅝ IN CUT, 2.5 IN L, BRIGHT FINISH

CLEVELAND
BALL END MILL, 4 FLUTES, 0.5 IN MILLING DIAMETER, ⅝ IN CUT, 2.5 IN L, BRIGHT FINISH
Item # GNFC60114
Mfr. Model # C60114

EHC: EHC :

This high performance grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with hardened steel, nickel, stainless steel, steel, and titanium, and is for finishing, roughing, and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2½ inch length.

This high performance grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with hardened steel, nickel, stainless steel, steel, and titanium, and is for finishing, roughing, and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $111.09 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, ⅜ IN MILLING DIAMETER, ¾ IN CUT, 2.5 IN LENGTH, COBALT

CLEVELAND
BALL END MILL, 2 FLUTES, ⅜ IN MILLING DIAMETER, ¾ IN CUT, 2.5 IN LENGTH, COBALT
Item # GNFHGC2B42653
Mfr. Model # HGC2B42653

EHC: EHC :

This general purpose grade ball end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This ball end mill is designed for use with all materials, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 2½ inch length.

This general purpose grade ball end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This ball end mill is designed for use with all materials, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 2½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $51.34 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, ½ IN MILLING DIAMETER, ⅝ IN CUT, 2.5 IN L, TIALN

CLEVELAND
BALL END MILL, 4 FLUTES, ½ IN MILLING DIAMETER, ⅝ IN CUT, 2.5 IN L, TIALN
Item # GNFC83560
Mfr. Model # C83560

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2½ inch length.

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $100.19 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, ½ IN MILLING DIAMETER, 2 IN CUT, 4 IN L, BRIGHT FINISH

CLEVELAND
BALL END MILL, 4 FLUTES, ½ IN MILLING DIAMETER, 2 IN CUT, 4 IN L, BRIGHT FINISH
Item # GNFC63562
Mfr. Model # C63562

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and four inch length.

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and four inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $142.25 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, ⅛ IN MILLING DIAMETER, ½ IN CUT, 1.5 IN LENGTH, TIALN

CLEVELAND
BALL END MILL, 4 FLUTES, ⅛ IN MILLING DIAMETER, ½ IN CUT, 1.5 IN LENGTH, TIALN
Item # GNFC83520
Mfr. Model # C83520

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight 1/8 inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 1½ inch length.

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight 1/8 inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 1½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $28.00 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, 9/16 IN MILLING DIAMETER, 1¼ IN CUT, 3.5 IN L

CLEVELAND
BALL END MILL, 2 FLUTES, 9/16 IN MILLING DIAMETER, 1¼ IN CUT, 3.5 IN L
Item # GNFC60960
Mfr. Model # C60960

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight 9/16 inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 3½ inch length.

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight 9/16 inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 3½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $164.54 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, ⅛ IN MILLING DIAMETER, ½ IN CUT, 1.5 IN LENGTH, TIALN

CLEVELAND
BALL END MILL, 2 FLUTES, ⅛ IN MILLING DIAMETER, ½ IN CUT, 1.5 IN LENGTH, TIALN
Item # GNFC80922
Mfr. Model # C80922

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight 1/8 inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 1½ inch length.

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight 1/8 inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 1½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $41.85 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, ¼ IN MILLING DIAMETER, ¾ IN CUT, 2.5 IN LENGTH, CARBIDE

CLEVELAND
BALL END MILL, 4 FLUTES, ¼ IN MILLING DIAMETER, ¾ IN CUT, 2.5 IN LENGTH, CARBIDE
Item # GNFC83536
Mfr. Model # C83536

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight 1/4 inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2½ inch length.

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight 1/4 inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2½ inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $42.38 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, ¼ IN MILLING DIAMETER, ⅝ IN CUT, 2.4 IN LENGTH, COBALT

CLEVELAND
BALL END MILL, 2 FLUTES, ¼ IN MILLING DIAMETER, ⅝ IN CUT, 2.4 IN LENGTH, COBALT
Item # GNF559-32751
Mfr. Model # 559-32751

EHC: EHC :

This general purpose grade ball end mill is made out of cobalt, with a tiCN finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This ball end mill is designed for use with stainless steel and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 2.4375 inch length.

This general purpose grade ball end mill is made out of cobalt, with a tiCN finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This ball end mill is designed for use with stainless steel and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and 2.4375 inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $41.81 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, ⅛ IN MILLING DIAMETER, ⅜ IN CUT, 2.3 IN LENGTH, COBALT

CLEVELAND
BALL END MILL, 4 FLUTES, ⅛ IN MILLING DIAMETER, ⅜ IN CUT, 2.3 IN LENGTH, COBALT
Item # GNF560-42778
Mfr. Model # 560-42778

EHC: EHC :

This general purpose grade ball end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This ball end mill is designed for use with all materials, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2.3125 inch length.

This general purpose grade ball end mill is made out of cobalt, with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This ball end mill is designed for use with all materials, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and 2.3125 inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $77.03 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, 7/16 IN MILLING DIAMETER, 2 IN CUT, 4 IN L, BRIGHT FINISH

CLEVELAND
BALL END MILL, 4 FLUTES, 7/16 IN MILLING DIAMETER, 2 IN CUT, 4 IN L, BRIGHT FINISH
Item # GNFC63557
Mfr. Model # C63557

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight 7/16 inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and four inch length.

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight 7/16 inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and four inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $126.96 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, ½ IN MILLING DIAMETER, 1½ IN CUT, 6 IN L, BRIGHT FINISH

CLEVELAND
BALL END MILL, 2 FLUTES, ½ IN MILLING DIAMETER, 1½ IN CUT, 6 IN L, BRIGHT FINISH
Item # GNFC60959
Mfr. Model # C60959

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and six inch length.

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight ½ inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and six inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $172.24 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, 1 IN MILLING DIAMETER, 3 IN CUT, 6 IN L, BRIGHT FINISH

CLEVELAND
BALL END MILL, 2 FLUTES, 1 IN MILLING DIAMETER, 3 IN CUT, 6 IN L, BRIGHT FINISH
Item # GNFC60974
Mfr. Model # C60974

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight one inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and six inch length.

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight one inch diameter shank. This ball end mill is designed for use with aluminum, brass, bronze, copper, and magnesium, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and six inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $762.85 / EACH

EHC: EHC :

Qty:

Compare

END MILL, RIGHT HAND, 38 ° , BRIGHT (UNCOATED), 1 X 1 X 2-1/4 X 5 IN

BASSETT
END MILL, RIGHT HAND, 38 ° , BRIGHT (UNCOATED), 1 X 1 X 2-1/4 X 5 IN
Item # GNFB40317
Mfr. Model # B40317

EHC: EHC :

This end mill has a single end with a one inch diameter shank and a bright (uncoated) finish. This end mill is for centre cutting. It also has right hand cutting direction, along with four flutes and five inch length.

This end mill has a single end with a one inch diameter shank and a bright (uncoated) finish. This end mill is for centre cutting. It also has right hand cutting direction, along with four flutes and five inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $541.20 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 2 FLUTES, 1 IN MILLING DIAMETER, 3 IN CUT, 6 IN L, TIALN FINISH

CLEVELAND
BALL END MILL, 2 FLUTES, 1 IN MILLING DIAMETER, 3 IN CUT, 6 IN L, TIALN FINISH
Item # GNFC80974
Mfr. Model # C80974

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight one inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and six inch length.

This general purpose grade ball end mill is made out of carbide with a TiAlN finish. It has a single end, with a straight one inch diameter shank. This ball end mill is designed for use with cast iron and steel, and is for finishing and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with two flutes and six inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1,373.87 / EACH

EHC: EHC :

Qty:

Compare

BALL END MILL, 4 FLUTES, ¼ IN MILLING DIAMETER, 1⅛ IN CUT, 3 IN L

OSG
BALL END MILL, 4 FLUTES, ¼ IN MILLING DIAMETER, 1⅛ IN CUT, 3 IN L
Item # OSG464-2500BN
Mfr. Model # 464-2500-BN

EHC: EHC :

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight 1/4 inch diameter shank. This ball end mill is designed for use with aluminum, cast iron, die steel, hardened steel, steel, and tool steel, and is for finishing, roughing, and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and three inch length.

This general purpose grade ball end mill is made out of carbide with a bright (uncoated) finish. It has a single end, with a straight 1/4 inch diameter shank. This ball end mill is designed for use with aluminum, cast iron, die steel, hardened steel, steel, and tool steel, and is for finishing, roughing, and centre cutting. Plus, it is non-coolant through and has right hand cutting direction, along with four flutes and three inch length.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $46.43 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Search within these results

Product Categories

Ball End Mills

615 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty