Arbor & Pneumatic Presses

This arbour press is made of cast iron and has a force of one ton. It has an eight-inch swing, a 4¼-inch table work surface, and a four-position rotating anvil of 4¼-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, ⅞ x ⅞ inches ram, and a five-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of one ton. It has an eight-inch swing, a 4¼-inch table work surface, and a four-position rotating anvil of 4¼-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, ⅞ x ⅞ inches ram, and a five-inch maximum working height. It includes an anvil and a handle.

This ratcheting arbour press is made of cast iron and has a force of three tons. It has a 13¼-inch swing, a table work surface of 8½ x 10 inches, and a four-position rotating anvil of 7 13/16-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 17½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This ratcheting arbour press is made of cast iron and has a force of three tons. It has a 13¼-inch swing, a table work surface of 8½ x 10 inches, and a four-position rotating anvil of 7 13/16-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 17½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of four tons. It has a swing of 16¾-inch, a table work surface of 10 x 10¼ inches, and a four-position anvil of 9½-inch diameter. The press has a slot width ranging from ¾ to 2¾ inches, a 15¾-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of four tons. It has a swing of 16¾-inch, a table work surface of 10 x 10¼ inches, and a four-position anvil of 9½-inch diameter. The press has a slot width ranging from ¾ to 2¾ inches, a 15¾-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of ½ ton. It has a swing of 6½-inch, a table work surface of 4 x 4 inches, and a four-position rotating anvil of 3½-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, a 4½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of ½ ton. It has a swing of 6½-inch, a table work surface of 4 x 4 inches, and a four-position rotating anvil of 3½-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, a 4½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of two tons. It has a swing of 11-inch, a table work surface of 7¼ x 6 inches, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from 3/32 to 2 13/64 inches, an eight-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of two tons. It has a swing of 11-inch, a table work surface of 7¼ x 6 inches, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from 3/32 to 2 13/64 inches, an eight-inch maximum working height, a large-toothed rack, and a magnetic insert.

This arbour press is made of cast iron and has a force of three tons. It has an 11¾-inch swing, a 6¾-inch table work surface, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1¼ x 1¼ inches ram, and a 12½-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of three tons. It has an 11¾-inch swing, a 6¾-inch table work surface, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1¼ x 1¼ inches ram, and a 12½-inch maximum working height. It includes an anvil and a handle.

This standard arbour press is made of cast iron and has a force of three tons. It has a swing of 12-inch, a table work surface of 8⅛ x 8½ inches, and a four-position rotating anvil of 6⅝-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 12¼-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of three tons. It has a swing of 12-inch, a table work surface of 8⅛ x 8½ inches, and a four-position rotating anvil of 6⅝-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 12¼-inch maximum working height, a large-toothed rack, and a magnetic insert.

This arbour press is made of cast iron and has a force of ½ ton. It has a 6½-inch swing, a 3½-inch table work surface, and a four-position rotating anvil of 3½-inch diameter. The press has a slot width ranging from 5/16 to 15/16 inches, 5⅛ x 9 5/16 inches base, and a 4⅝-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of ½ ton. It has a 6½-inch swing, a 3½-inch table work surface, and a four-position rotating anvil of 3½-inch diameter. The press has a slot width ranging from 5/16 to 15/16 inches, 5⅛ x 9 5/16 inches base, and a 4⅝-inch maximum working height. It includes an anvil and a handle.

This standard arbour press is made of cast iron and has a force of one ton. It has a swing of eight-inch, a table work surface of 5¾ x 4¼ inches, and a four-position rotating anvil of 4½-inch diameter. The press has a slot width ranging from 45/64 to 1 27/64 inches, a six-inch maximum working height, a large-toothed rack, and a speed wheel.

This standard arbour press is made of cast iron and has a force of one ton. It has a swing of eight-inch, a table work surface of 5¾ x 4¼ inches, and a four-position rotating anvil of 4½-inch diameter. The press has a slot width ranging from 45/64 to 1 27/64 inches, a six-inch maximum working height, a large-toothed rack, and a speed wheel.

This optional floor stand for ratcheting press arbour has a 22¼-inch anvil diameter and measures 11⅘ width x 35 13/16 height x 22¼ inches depth. It has a size of 11 13/16 x 22¼ inches and a slot to accommodate pieces that need to extend below the base of the press table.

This optional floor stand for ratcheting press arbour has a 22¼-inch anvil diameter and measures 11⅘ width x 35 13/16 height x 22¼ inches depth. It has a size of 11 13/16 x 22¼ inches and a slot to accommodate pieces that need to extend below the base of the press table.

This arbour press is made of cast iron and has a force of two tons. It has a 10-inch swing, a 6½-inch table work surface, and a four-position rotating anvil of 6½-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1 x 1 inches ram, and a 6½-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of two tons. It has a 10-inch swing, a 6½-inch table work surface, and a four-position rotating anvil of 6½-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1 x 1 inches ram, and a 6½-inch maximum working height. It includes an anvil and a handle.