Arbor & Pneumatic Presses

This standard arbour press is made of cast iron and has a force of ½ ton. It has a swing of 6½-inch, a table work surface of 4 x 4 inches, and a four-position rotating anvil of 3½-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, a 4½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of ½ ton. It has a swing of 6½-inch, a table work surface of 4 x 4 inches, and a four-position rotating anvil of 3½-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, a 4½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of three tons. It has a swing of 12-inch, a table work surface of 8⅛ x 8½ inches, and a four-position rotating anvil of 6⅝-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 12¼-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of three tons. It has a swing of 12-inch, a table work surface of 8⅛ x 8½ inches, and a four-position rotating anvil of 6⅝-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 12¼-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of two tons. It has a swing of 11-inch, a table work surface of 7¼ x 6 inches, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from 3/32 to 2 13/64 inches, an eight-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of two tons. It has a swing of 11-inch, a table work surface of 7¼ x 6 inches, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from 3/32 to 2 13/64 inches, an eight-inch maximum working height, a large-toothed rack, and a magnetic insert.

This arbour press is made of cast iron and has a force of one ton. It has an eight-inch swing, a 4¼-inch table work surface, and a four-position rotating anvil of 4¼-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, ⅞ x ⅞ inches ram, and a five-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of one ton. It has an eight-inch swing, a 4¼-inch table work surface, and a four-position rotating anvil of 4¼-inch diameter. The press has a slot width ranging from 9/16 to 1 1/16 inches, ⅞ x ⅞ inches ram, and a five-inch maximum working height. It includes an anvil and a handle.

This ratcheting arbour press is made of cast iron and has a force of three tons. It has a 13¼-inch swing, a table work surface of 8½ x 10 inches, and a four-position rotating anvil of 7 13/16-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 17½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This ratcheting arbour press is made of cast iron and has a force of three tons. It has a 13¼-inch swing, a table work surface of 8½ x 10 inches, and a four-position rotating anvil of 7 13/16-inch diameter. The press has a slot width ranging from 1 to 2 inches, a 17½-inch maximum working height, a large-toothed rack, and a magnetic insert.

This ratchet lever arbour press is made of cast iron and has a force of three tons. It has a seven-inch swing, a table work surface of 6½ x 8¾ inches, and an anvil of 7⅞-inch diameter. The press has an 18¼-inch maximum working height, 21 x 8¼ inches base, and slot width ranging from ⅝ to 1½-inches. It includes a fixed table and friction brake.

This ratchet lever arbour press is made of cast iron and has a force of three tons. It has a seven-inch swing, a table work surface of 6½ x 8¾ inches, and an anvil of 7⅞-inch diameter. The press has an 18¼-inch maximum working height, 21 x 8¼ inches base, and slot width ranging from ⅝ to 1½-inches. It includes a fixed table and friction brake.

This ratchet lever arbour press is made of cast iron and has a force of three tons. It has a seven-inch swing, a table work surface of 5½ x 5½ inches, and an anvil of 6⅞-inch diameter. The press has an 11½-inch maximum working height, 18 length x 7¼ inches width base, and slot width ranging from 13/16 to 1 13/16 inches. It includes a fixed table.

This ratchet lever arbour press is made of cast iron and has a force of three tons. It has a seven-inch swing, a table work surface of 5½ x 5½ inches, and an anvil of 6⅞-inch diameter. The press has an 11½-inch maximum working height, 18 length x 7¼ inches width base, and slot width ranging from 13/16 to 1 13/16 inches. It includes a fixed table.

This standard arbour press is made of cast iron and has a force of one ton. It has a swing of eight-inch, a table work surface of 5¾ x 4¼ inches, and a four-position rotating anvil of 4½-inch diameter. The press has a slot width ranging from 45/64 to 1 27/64 inches, a six-inch maximum working height, a large-toothed rack, and a speed wheel.

This standard arbour press is made of cast iron and has a force of one ton. It has a swing of eight-inch, a table work surface of 5¾ x 4¼ inches, and a four-position rotating anvil of 4½-inch diameter. The press has a slot width ranging from 45/64 to 1 27/64 inches, a six-inch maximum working height, a large-toothed rack, and a speed wheel.

This arbour press is made of cast iron and has a force of three tons. It has an 11¾-inch swing, a 6¾-inch table work surface, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1¼ x 1¼ inches ram, and a 12½-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of three tons. It has an 11¾-inch swing, a 6¾-inch table work surface, and a four-position rotating anvil of 6¾-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1¼ x 1¼ inches ram, and a 12½-inch maximum working height. It includes an anvil and a handle.

This single lever arbour press is made of cast iron and has a force of three tons. It has a seven-inch swing, a table work surface of 5½ x 5½ inches, and an anvil of 6⅞-inch diameter. The press has an 11½-inch maximum working height, 14 x 6 inches base, and slot width ranging from 13/16 to 1 13/16 inches. It includes a slotted table and friction brake.

This single lever arbour press is made of cast iron and has a force of three tons. It has a seven-inch swing, a table work surface of 5½ x 5½ inches, and an anvil of 6⅞-inch diameter. The press has an 11½-inch maximum working height, 14 x 6 inches base, and slot width ranging from 13/16 to 1 13/16 inches. It includes a slotted table and friction brake.

This arbour press is made of zinc casting and has a force of ¼ ton. It has a 4½-inch swing, a table work surface of 3¾ x 7 inches, and an anvil of ½-inch diameter. The press has a 3 3/16-inch maximum working height, slot width up to ½-inch, reversible ram, and four adjustable nylon gibs. It includes two ¼#20 x ¾ inches screws.

This arbour press is made of zinc casting and has a force of ¼ ton. It has a 4½-inch swing, a table work surface of 3¾ x 7 inches, and an anvil of ½-inch diameter. The press has a 3 3/16-inch maximum working height, slot width up to ½-inch, reversible ram, and four adjustable nylon gibs. It includes two ¼#20 x ¾ inches screws.

This arbour press is made of cast iron and has a force of two tons. It has a 10-inch swing, a 6½-inch table work surface, and a four-position rotating anvil of 6½-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1 x 1 inches ram, and a 6½-inch maximum working height. It includes an anvil and a handle.

This arbour press is made of cast iron and has a force of two tons. It has a 10-inch swing, a 6½-inch table work surface, and a four-position rotating anvil of 6½-inch diameter. The press has a slot width ranging from ¾ to 1 13/16 inches, 1 x 1 inches ram, and a 6½-inch maximum working height. It includes an anvil and a handle.

This standard arbour press is made of cast iron and has a force of four tons. It has a swing of 16¾-inch, a table work surface of 10 x 10¼ inches, and a four-position anvil of 9½-inch diameter. The press has a slot width ranging from ¾ to 2¾ inches, a 15¾-inch maximum working height, a large-toothed rack, and a magnetic insert.

This standard arbour press is made of cast iron and has a force of four tons. It has a swing of 16¾-inch, a table work surface of 10 x 10¼ inches, and a four-position anvil of 9½-inch diameter. The press has a slot width ranging from ¾ to 2¾ inches, a 15¾-inch maximum working height, a large-toothed rack, and a magnetic insert.

This single lever arbour press is made of cast iron and has a force of one ton. It has a 3½-inch swing, a table work surface of 3 x 3½ inches, and a base of 9½ length x 4¼ inches width. The press has a 4½-inch maximum working height, 1 x 1 x 7½ inches ram size, a shimmed ram cap, friction brake, smooth action gears, and adjustable handles.

This single lever arbour press is made of cast iron and has a force of one ton. It has a 3½-inch swing, a table work surface of 3 x 3½ inches, and a base of 9½ length x 4¼ inches width. The press has a 4½-inch maximum working height, 1 x 1 x 7½ inches ram size, a shimmed ram cap, friction brake, smooth action gears, and adjustable handles.

This manual arbour press is made of cast iron and has a force of three tons. It has a 10-inch swing, a removable anvil of 1½-inch diameter, and a ⅞ to 2⅛ inches slot width. The press has a five-inch throat depth, 11-inch maximum height, and six-inch ram travel per revolution. It features ratcheting action and includes a four-position die plate.

This manual arbour press is made of cast iron and has a force of three tons. It has a 10-inch swing, a removable anvil of 1½-inch diameter, and a ⅞ to 2⅛ inches slot width. The press has a five-inch throat depth, 11-inch maximum height, and six-inch ram travel per revolution. It features ratcheting action and includes a four-position die plate.