Alnico Magnets

This alnico deep pot magnet is cylindrically permanent and is assembled concentrically in a steel pot. It has a 5.8-pound maximum pull, a 428 Degrees F stability temperature, and a 10 UNF tap size. It measures 0.689 x 0.689 x 0.629 inches and has an outside diameter of 0.689 inches.

This alnico deep pot magnet is cylindrically permanent and is assembled concentrically in a steel pot. It has a 5.8-pound maximum pull, a 428 Degrees F stability temperature, and a 10 UNF tap size. It measures 0.689 x 0.689 x 0.629 inches and has an outside diameter of 0.689 inches.

This shallow pot magnet is designed for applications where the height is too restricted for conventional deep pot magnets. It has an 11-pound maximum pull, a 1022 Degrees F stability temperature, and an M4 CSK tap size. It measures 1.125 x 1.125 x 0.344 inches, has an outside diameter of 1.125 inches, and a hole diameter of 0.189-0.339 inches. This magnet is made of alnico five magnet material with a mild steel pot.

This shallow pot magnet is designed for applications where the height is too restricted for conventional deep pot magnets. It has an 11-pound maximum pull, a 1022 Degrees F stability temperature, and an M4 CSK tap size. It measures 1.125 x 1.125 x 0.344 inches, has an outside diameter of 1.125 inches, and a hole diameter of 0.189-0.339 inches. This magnet is made of alnico five magnet material with a mild steel pot.

This channel ferrite magnet has a magnet made of ceramic and a channel made of mild steel. It has a stability temperature of 176℉ and a hole diameter of two OFF to 0.28 inches, and measures 12 1/2 length x 0.98 width x 0.56 inches height. It has a maximum pull of 120 pounds.

This channel ferrite magnet has a magnet made of ceramic and a channel made of mild steel. It has a stability temperature of 176℉ and a hole diameter of two OFF to 0.28 inches, and measures 12 1/2 length x 0.98 width x 0.56 inches height. It has a maximum pull of 120 pounds.

Pocket magnet is a conventional one-piece horseshoe magnet with both poles in the same plane. Width 0.626 inches (15.9 mm), opening 0.311 inches (7.9 mm) and maximum pull 8.818 lbs. (4.0 kg).

Pocket magnet is a conventional one-piece horseshoe magnet with both poles in the same plane. Width 0.626 inches (15.9 mm), opening 0.311 inches (7.9 mm) and maximum pull 8.818 lbs. (4.0 kg).

This button magnet is made of Alnico five magnet material. It is a cylindrical magnet with poles in one plane and has a maximum pull of 1.5 pounds. It has a stability temperature of 1,022℉, a hole diameter of 0.177 inches, and a tap size of 0.16 inches to 0.28 inches. It is made of Alnico five magnet material. It measures 1/2 length x 0.500 width x 0.375 height x 1/2 inches diameter.

This button magnet is made of Alnico five magnet material. It is a cylindrical magnet with poles in one plane and has a maximum pull of 1.5 pounds. It has a stability temperature of 1,022℉, a hole diameter of 0.177 inches, and a tap size of 0.16 inches to 0.28 inches. It is made of Alnico five magnet material. It measures 1/2 length x 0.500 width x 0.375 height x 1/2 inches diameter.

This button magnet is made of Alnico five magnet material. It is a cylindrical magnet with poles in one plane and has a maximum pull of 4.2 pounds. It has a stability temperature of 1,022℉, a hole diameter of 0.188 inches, and a tap size of 0.22 inches to 0.34 inches. It is made of Alnico five magnet material. It measures 1/2 length x 1/2 width x 3/8 height x 3/4 inches diameter.

This button magnet is made of Alnico five magnet material. It is a cylindrical magnet with poles in one plane and has a maximum pull of 4.2 pounds. It has a stability temperature of 1,022℉, a hole diameter of 0.188 inches, and a tap size of 0.22 inches to 0.34 inches. It is made of Alnico five magnet material. It measures 1/2 length x 1/2 width x 3/8 height x 3/4 inches diameter.

Alnico deep pot magnet. Outside diameter .75 inches/19.05mm. Height .75 inches/19.05mm. Max pull 9.13 lbs./4.15 kg.

Alnico deep pot magnet. Outside diameter .75 inches/19.05mm. Height .75 inches/19.05mm. Max pull 9.13 lbs./4.15 kg.

Alnico deep pot magnet. Outside diameter .25 inches/6.35mm. Height 1.0 inches/25.4mm. Max pull 16.0 lbs./7.27 kg.

Alnico deep pot magnet. Outside diameter .25 inches/6.35mm. Height 1.0 inches/25.4mm. Max pull 16.0 lbs./7.27 kg.

Alnico deep pot magnet. Outside diameter .625 inches/15.88mm. Height .75 inches/19.05mm. Max pull 4.13 lbs./1.88 kg.

Alnico deep pot magnet. Outside diameter .625 inches/15.88mm. Height .75 inches/19.05mm. Max pull 4.13 lbs./1.88 kg.

Alnico deep pot magnet. Outside diameter .75 inches/19.05mm. Height .5 inches/12.7mm. Max pull 5.4 lbs./2.45 kg.

Alnico deep pot magnet. Outside diameter .75 inches/19.05mm. Height .5 inches/12.7mm. Max pull 5.4 lbs./2.45 kg.

This button magnet is made of Alnico five magnet material. It is a cylindrical magnet with poles in one plane and has a maximum pull of 10.6 pounds. It has a stability temperature of 1,022℉, a hole diameter of 0.279 inches, and a tap size of 0.31 inches to 0.50 inches. It is made of Alnico five magnet material. It measures 1 1/4 length x 1 1/4 width x 1 height x 1 1/4 inches diameter.

This button magnet is made of Alnico five magnet material. It is a cylindrical magnet with poles in one plane and has a maximum pull of 10.6 pounds. It has a stability temperature of 1,022℉, a hole diameter of 0.279 inches, and a tap size of 0.31 inches to 0.50 inches. It is made of Alnico five magnet material. It measures 1 1/4 length x 1 1/4 width x 1 height x 1 1/4 inches diameter.

This pocket magnet is a conventional one-piece horseshoe magnet that has both poles in the same place. It has a maximum pull of 5.3 pounds, is made of Alnico five magnet material, and has a stability temperature of 1,022℉. It measures 0.874 length x 0.311 width x 1 inch height.

This pocket magnet is a conventional one-piece horseshoe magnet that has both poles in the same place. It has a maximum pull of 5.3 pounds, is made of Alnico five magnet material, and has a stability temperature of 1,022℉. It measures 0.874 length x 0.311 width x 1 inch height.

Alnico deep pot magnet. Outside diameter .25 inches/6.35mm. Height .5 inches/12.7mm. Max pull 0.25 lbs./.11 kg.

Alnico deep pot magnet. Outside diameter .25 inches/6.35mm. Height .5 inches/12.7mm. Max pull 0.25 lbs./.11 kg.

This shallow pot magnet is designed for applications where the height is too restricted for conventional deep pot magnets. It has a 6.6-pound maximum pull, a 1022 Degrees F stability temperature, and an M3 CSK tap size. It measures 0.75 x 0.75 x 0.295 inches, has an outside diameter of 0.75 inches, and a hole diameter of 0.145-0.263 inches. This magnet is made of alnico five magnet material and has a mild steel pot.

This shallow pot magnet is designed for applications where the height is too restricted for conventional deep pot magnets. It has a 6.6-pound maximum pull, a 1022 Degrees F stability temperature, and an M3 CSK tap size. It measures 0.75 x 0.75 x 0.295 inches, has an outside diameter of 0.75 inches, and a hole diameter of 0.145-0.263 inches. This magnet is made of alnico five magnet material and has a mild steel pot.

This deep pot magnet is made of Alnico five magnet material and mild steel. It has a maximum pull of 32.5 pounds. It measures 1.377 length x 1.377 width x 1.181 height x 1.377 inches diameter and has a tap size of 10 UNF. It has a hole diameter of 10 UNF thread and a stability temperature of 428℉. It is primarily used for gripping applications.

This deep pot magnet is made of Alnico five magnet material and mild steel. It has a maximum pull of 32.5 pounds. It measures 1.377 length x 1.377 width x 1.181 height x 1.377 inches diameter and has a tap size of 10 UNF. It has a hole diameter of 10 UNF thread and a stability temperature of 428℉. It is primarily used for gripping applications.

This deep pot magnet is made of Alnico five magnet material and mild steel. It has a maximum pull of 13.4 pounds. It measures 1.062 length x 1.062 width x 1 height x 1.062 inches diameter and has a tap size of 10 UNF. It has a hole diameter of 10 UNF thread and a stability temperature of 428℉. It is primarily used for gripping applications.

This deep pot magnet is made of Alnico five magnet material and mild steel. It has a maximum pull of 13.4 pounds. It measures 1.062 length x 1.062 width x 1 height x 1.062 inches diameter and has a tap size of 10 UNF. It has a hole diameter of 10 UNF thread and a stability temperature of 428℉. It is primarily used for gripping applications.