All purpose heat shrink tubing covers wire and cable and shrinks when heat is applied to create tightly sealed bundles. Also known as single- or thin-wall heat shrink tubing, it is used across a wide variety of applications to insulate, protect, bundle, and provide strain relief for wire and cable.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL listed, File E-39100, SAE AS23053/5, Class 1 (all colours), Class 2 (clear), CSA certified, and RoHS 2011/65/EU compliant. It has length of 100 feet. It is also flame retardant, with a 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL listed, File E-39100, SAE AS23053/5, Class 1 (all colours), Class 2 (clear), CSA certified, and RoHS 2011/65/EU compliant. It has length of 100 feet. It is also flame retardant, with a 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This bag of 10 pieces of thin, black, FP-301 heat shrink tubing are all 1/4-inch by six inches in length and made of polyolefin that is split resistant, mechanically tough and resists cold flow. It is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It's dielectric stregth rating is up to 900 volts.
This bag of 10 pieces of thin, black, FP-301 heat shrink tubing are all 1/4-inch by six inches in length and made of polyolefin that is split resistant, mechanically tough and resists cold flow. It is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It's dielectric stregth rating is up to 900 volts.
#1 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
#1 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
This is a bag of ten black FP-301 heat shrink tubing pieces measuring 3/8-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and it's operational at minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. Its dielectric strength rating is up to 900 volts.
This is a bag of ten black FP-301 heat shrink tubing pieces measuring 3/8-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and it's operational at minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. Its dielectric strength rating is up to 900 volts.
Black 3/4 inch diameter by four foot length of thin walled FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Black 3/4 inch diameter by four foot length of thin walled FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Clear 3/8 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Clear 3/8 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
This FP-301 thin walled heat shrink tubing is made of flexible polyolefin that is split resistant, mechanically tough, and resists cold flow. It is rated for continuous operation from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It comes in a bag of ten pieces that are a half inch in diameter and six inches in length. And its dialectric strength is rated to 900 volts.
This FP-301 thin walled heat shrink tubing is made of flexible polyolefin that is split resistant, mechanically tough, and resists cold flow. It is rated for continuous operation from minus 55 degrees celsius for short periods up to 135 degrees celsius for continuous operation. It comes in a bag of ten pieces that are a half inch in diameter and six inches in length. And its dialectric strength is rated to 900 volts.
Clear 3/4 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Clear 3/4 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
This split resistant, black, FP-301 heat shrink tubing comes in a bag of ten pieces, all 3/4-inch in diameter by six inches in length that are made of polyolefin that is mechanically tough and resists cold flow. The pieces have a shrink ratio of 2:1 and is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And it has a dielectric stregth rating up to 900 volts.
This split resistant, black, FP-301 heat shrink tubing comes in a bag of ten pieces, all 3/4-inch in diameter by six inches in length that are made of polyolefin that is mechanically tough and resists cold flow. The pieces have a shrink ratio of 2:1 and is operational from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And it has a dielectric stregth rating up to 900 volts.
This is a bag of split resistant, black, FP-301 heat shrink tubing that comes in with ten pieces measuring 3/16-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and has an operational temperature range from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And its dielectric strength rating is up to 900 volts.
This is a bag of split resistant, black, FP-301 heat shrink tubing that comes in with ten pieces measuring 3/16-inch in diameter by six inches in length and made of polyolefin that is mechanically tough and resists cold flow. Its shrink ratio is 2:1 and has an operational temperature range from minus 55 degrees celsius for short periods up to 135 degrees celsius continuous operation. And its dielectric strength rating is up to 900 volts.
1/8 inch by 25 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
1/8 inch by 25 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
One inch diameter by four foot length of thin walled black FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
One inch diameter by four foot length of thin walled black FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
1/2 inch by 10 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
1/2 inch by 10 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
Black 1/4 inch by four feet in length poly heat shrink tubing that is mechanically tough, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Black 1/4 inch by four feet in length poly heat shrink tubing that is mechanically tough, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
This heat shrink tubing is made of modified chlorinated polyolefin, and is black. In addition, it meets the standards for AMS-3623, MIL-R-46846, Type 1, Class 1, SAE-AMS-DTL-23053/1 Class 1 and 2, SC-X-15112. It has length of six inches, plus a 250 Degrees F maximum temperature, and -94 Degrees F minimum temperature.
This heat shrink tubing is made of modified chlorinated polyolefin, and is black. In addition, it meets the standards for AMS-3623, MIL-R-46846, Type 1, Class 1, SAE-AMS-DTL-23053/1 Class 1 and 2, SC-X-15112. It has length of six inches, plus a 250 Degrees F maximum temperature, and -94 Degrees F minimum temperature.
White poly heat shrink tubing, measuring 1/2 inch in diameter in a four foot stick, resists cold flow with a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
White poly heat shrink tubing, measuring 1/2 inch in diameter in a four foot stick, resists cold flow with a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.