Coating coverage describes how much abrasive grain covers the surface.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Adhesive-Backed Sanding Discs
Adhesive-backed sanding discs remove rust and paint, clean and level welds, and prepare them for final finishing. Sometimes called PSA (pressure-sensitive adhesive) discs, they have a sticky backing that attaches to a compatible smooth-surface backing pad. Adhesive-backed sanding discs cannot be reapplied after removing, so they're a good choice for applications where grits aren't changed frequently and the abrasive is fully used before changing.
These sanding disc use a pressure sensitive adhesive attachment type. Each blue-coloured disc has a diameter of six inches, a medium coarseness rating of 80 grit, and a six-hole design. These discs have E-weight latex-paper backing and use a zirconia alumina abrasive. There are 50 sanding discs per package.
These sanding disc use a pressure sensitive adhesive attachment type. Each blue-coloured disc has a diameter of six inches, a medium coarseness rating of 80 grit, and a six-hole design. These discs have E-weight latex-paper backing and use a zirconia alumina abrasive. There are 50 sanding discs per package.
These sanding discs with pressure-sensitive adhesive can be used for body filler applications. They are yellow and measure eight inches in diameter. They have an extra coarse grit of 36 and a non-vacuum hole design. These discs have an abrasive coating made of aluminum oxide.
These sanding discs with pressure-sensitive adhesive can be used for body filler applications. They are yellow and measure eight inches in diameter. They have an extra coarse grit of 36 and a non-vacuum hole design. These discs have an abrasive coating made of aluminum oxide.
These sanding discs have a hook-and-loop disc attachment. They measure six inches in diameter. They have a very fine coarse grit of 320 and a non-vacuum hole design. These discs have a durable abrasive coating made of ceramic alumina and B-weight latex-paper backing. There are 50 sanding discs per package.
These sanding discs have a hook-and-loop disc attachment. They measure six inches in diameter. They have a very fine coarse grit of 320 and a non-vacuum hole design. These discs have a durable abrasive coating made of ceramic alumina and B-weight latex-paper backing. There are 50 sanding discs per package.
These blue sanding discs have a pressure-sensitive adhesive for stripping, sanding, and body filler. They have a diameter of eight inches, a medium-coarse grit of 80, and a non-vacuum hole design. These discs have a strong E-weight latex-paper backing and an abrasive coating made of zirconia alumina. There are 25 sanding discs per package.
These blue sanding discs have a pressure-sensitive adhesive for stripping, sanding, and body filler. They have a diameter of eight inches, a medium-coarse grit of 80, and a non-vacuum hole design. These discs have a strong E-weight latex-paper backing and an abrasive coating made of zirconia alumina. There are 25 sanding discs per package.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
Suitable for various materials including paint, varnish, fillers on metals, plastic or wood, the A275 sanding disc can cut on dry or wet surfaces. This six-inch, adhesive disc is pressure-sensitive with six vacuum holes, and is made of a heat-treated, P-graded aluminum oxide with a 400 grit bonded on a B-weight backing. Sold as a roll of 100 discs.
Suitable for various materials including paint, varnish, fillers on metals, plastic or wood, the A275 sanding disc can cut on dry or wet surfaces. This six-inch, adhesive disc is pressure-sensitive with six vacuum holes, and is made of a heat-treated, P-graded aluminum oxide with a 400 grit bonded on a B-weight backing. Sold as a roll of 100 discs.
No-fil magnum A275 pressure sensitive adhesive roll with 6 vacuum holes is a premium P-graded, heat treated aluminium oxide abrasive. Non-pigmented stearate open coat and has a superior life, fastest cut rate and consistent finish.
No-fil magnum A275 pressure sensitive adhesive roll with 6 vacuum holes is a premium P-graded, heat treated aluminium oxide abrasive. Non-pigmented stearate open coat and has a superior life, fastest cut rate and consistent finish.
Designed for industrial, automotive, aircraft, and other heavy applications, this A975 sanding disc provides a uniform finish on primed and painted materials, composites, marine gel coat, wood and metals. This six-inch, self-adhesive, abrasive disc has a grit of 100 and is made of seeded gel ceramic blended with heat-treated, P-graded aluminum oxide bonded on a strong, reinforced backing. Sold as a roll of 100 discs.
Designed for industrial, automotive, aircraft, and other heavy applications, this A975 sanding disc provides a uniform finish on primed and painted materials, composites, marine gel coat, wood and metals. This six-inch, self-adhesive, abrasive disc has a grit of 100 and is made of seeded gel ceramic blended with heat-treated, P-graded aluminum oxide bonded on a strong, reinforced backing. Sold as a roll of 100 discs.
Dry ice PSA 6 inch disc roll. Pressure sensitive abrasive, ideal for refinishing jobs that require an extremely durable abrasive with a strong reinforced backing. Fast cutting, long lasting without generating heat. Delivers superior cut on abrasion resistant paints and clears.
Dry ice PSA 6 inch disc roll. Pressure sensitive abrasive, ideal for refinishing jobs that require an extremely durable abrasive with a strong reinforced backing. Fast cutting, long lasting without generating heat. Delivers superior cut on abrasion resistant paints and clears.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 is a premium P-graded, heat-treated aluminium oxide abrasive. Non-pigmented stearate open coat, high strength B-wt latex backing, superior life, fastest cut rate, and consistent finish. Comes with 100 discs per roll.
No-fil magnum A275 pressure sensitive adhesive roll with 6 vacuum holes is a premium P-graded, heat treated aluminium oxide abrasive. Non-pigmented stearate open coat and has a superior life, fastest cut rate and consistent finish.
No-fil magnum A275 pressure sensitive adhesive roll with 6 vacuum holes is a premium P-graded, heat treated aluminium oxide abrasive. Non-pigmented stearate open coat and has a superior life, fastest cut rate and consistent finish.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
